Deuterium high-confinement (H-mode) plasmas, lasting up to 3.45 s, have been generated in the EAST by ion cyclotron range of frequency (ICRF) heating. H-mode access was achieved by coating the molybdenum-tiled first wall with lithium to reduce the hydrogen recycling from the wall. H-mode plasmas with plasma currents between 0.4 and 0.6 MA and axial toroidal magnetic fields between 1.85 and 1.95 T were generated by 27 MHz ICRF heating of deuterium plasma with hydrogen minority. The ICRF input power required to access the H-mode was 1.6–1.8 MW. The line-averaged density was in the range (1.83–2.3) × 1019 m−3. 200–500 Hz type-III edge localized mode activity was observed during the H-mode phase. The H-mode confinement factor, H98IPB(y, 2), was ∼0.7.

Development of terahertz (THz) sources, detectors, and optical components has been an active area of research across the globe. The interest in THz optoelectronics is driven by the various applications they have enabled, such as ultrawide‐band communication systems, air‐ and space‐borne astronomy, atmospheric monitoring, small‐scale radar, airport security scanners, ultrafast nanodevices, and biomedical imaging and sensing. Here, the aim is to provide a comprehensive review of THz bandpass metamaterials focusing on several areas. First, the design fundamentals and geometrical patterns of THz bandpass metamaterials are summarized. Second, fabrication methods of THz bandpass metamaterials are reviewed, including typical micro‐ and nanofabrication techniques and laser micromachining techniques. More importantly, different engineering methods are reviewed for tuning and modulation of the THz transmission resonance for these metamaterials. Both passive and active modulation methods are included in this discussion; the passive method involves changes in the geometrical pattern of the filter material, and the active method performs in situ modulation of properties by applying an external physical field. Finally, the potential applications and prospects for future research of THz bandpass metamaterials are discussed.

An upgraded electron cyclotron emission imaging (ECEI) system consisting of new optics lenses with necessary electronics for receiving and processing signals for two dimension (2D) ECEI diagnostics was installed on EAST. Hyperboloid lens were adopted in the new system to optimize the spatial resolutions. The mixers array of sixteen elements measured the plasma electron cyclotron emission at eight frequencies simultaneously, and the profiles of the electron temperature and its fluctuation in an area of 20 cm (vertical) × 6 cm (horizontal) could then be analyzed. Evolution of sawtooth precursor and crash in EAST was observed.

A: A 384 channels (24 vertical ×16 radial) Electron Cyclotron Emission Imaging (ECEI) system has been installed on Experimental Advanced Superconducting Tokamak (EAST). With the aid of advanced front optics, high spaital resolution around 1.1cm and flexible vertical coverage 30 ∼ 70 cm have been realized. The well-designed optics also provides a long Rayleigh length up to 70 cm even with an object length larger than 2.6 m. The electronic system has a wide immediate frequency (IF) bandwidth 2 ∼ 16.5 GHz, which enables a continuous radial coverage up to 25 cm. Benefited from advanced optics design and the wide IF bandwidth, the ECEI system with high spatial resolution can provide a large and continuous view field, especially in the radial direction, which is enough for the observation of the whole q = 1 surface. The comprehensive details of the ECEI system will be presented in this paper, along with some experimental results. K: Nuclear instruments and methods for hot plasma diagnostics; Plasma diagnosticsinterferometry, spectroscopy and imaging 1Corresponding author.

A novel large aperture quasi-optical imaging system is designed for the new dualarray electron cyclotron emission (ECE) imaging (ECEI) instrument on the EAST tokamak. The zoom doublet scheme is used in the microwave imaging system on a super-conducting tokamak for the first time, and the focal plane can reach the high magnetic field side region even in the narrowest zoom configuration. The best spatial resolution in the vertical direction is 1.1 cm and the maximum vertical coverage can reach 80 cm. The field curvature is largely reduced in the narrow zoom configuration by the parabolic correction of a single lens surface. The imaging performance is fully characterized in the laboratory, and the characterized beam patterns show good agreements with the Gaussian beam specifications in the simulation results of the design.