No abstract

Acoustic emission (AE) tomography, which is based on the time-travel tomography with AE events as its signal sources, is a new visualization tool for inspecting and locating the internal damages in the structures. In this paper, AE tomography is applied to examine a man-made damage in a typical heterogeneous concrete structure to validate its effectiveness. Firstly, the finite element (ABAQUS/Explicit) simulation model of the concrete structure with one damaged circle in its center is built, and the simulated AE signals are obtained to establish the AE tomography. The results show that the damaged circle in the created model can be visualized clearly with the AE tomography in its original location. Secondly, the concrete specimen based on the FE model is fabricated, and the pencil lead break (PLB) signal is taken as the exciting source for AE tomography. It is shown that the experimental results have good consistency with the FE simulation results, which also verifies the feasibility of the finite element model for AE tomography. Finally, the damage source location based on AE tomography is compared with the traditional time of arrival (TOA) location method, and the better location accuracy is obtained with the AE tomography. The research results indicate that AE tomography has great potential in the application of structure damage detection.

AET (acoustic emission tomography) is a new visualization location method for inspecting and locating the internal damages in the structures. In this paper, the AET is applied to detect and visualize damage source locations in the Q235B steel structure to validate its effectiveness. Firstly, the ABAQUS/Explicit simulation model of the steel structure with one damaged circle in its center is built. And then, the simulated AE signals are obtained to establish the AE tomography. The results show that the damaged circle in the created model can be visualized clearly with the AET in its original location. Finally, the damage source location based on AET is compared with the traditional TOA (time of arrival) location method, and the better location accuracy is obtained. And this fact that further illustrates the AET has a great potential in the application of structure damage detection.