No abstract

Radiation pneumonitis (RP) is one of the major toxicities of thoracic radiation therapy. RP incidence has been proven to be closely associated with the dosimetric factors and normal tissue control possibility (NTCP) factors. However, because these factors only utilize limited information of the dose distribution, the prediction abilities of these factors are modest. We adopted the dosiomics method for RP prediction. The dosiomics method first extracts spatial features of the dose distribution within ipsilateral, contralateral, and total lungs, and then uses these extracted features to construct prediction model via univariate and multivariate logistic regression (LR). The dosiomics method is validated using 70 non-small cell lung cancer (NSCLC) patients treated with volumetric modulated arc therapy (VMAT) radiotherapy. Dosimetric and NTCP factors based prediction models are also constructed to compare with the dosiomics features based prediction model. For the dosimetric, NTCP and dosiomics factors/features, the most significant single factors/features are the mean dose, parallel/serial (PS) NTCP and gray level co-occurrence matrix (GLCM) contrast of ipsilateral lung, respectively. And the area under curve (AUC) of univariate LR is 0.665, 0.710 and 0.709, respectively. The second significant factors are V 5 of contralateral lung, equivalent uniform dose (EUD) derived from PS NTCP of contralateral lung and the low gray level run emphasis of gray level run length matrix (GLRLM) of total lungs. The AUC of multivariate LR is improved to 0.676, 0.744, and 0.782, respectively. The results demonstrate that the univariate LR of dosiomics features has approximate predictive ability with NTCP factors, and the multivariate LR outperforms both the dosimetric and NTCP factors. In conclusion, the spatial features of dose distribution extracted by the dosiomics method effectively improves the prediction ability.

No abstract

BackgroundIn volumetric modulated arc therapy (VMAT), gantry angles, dose rate and the MLC positions vary with the radiation delivery. The quality assurance (QA) system should be able to catch the planning and machine errors. The aim of this study was to investigate the sensitivity of three VMAT QA systems to machine errors.MethodsSeveral types of potential linac machine errors unique to VMAT delivery were simulated in sinusoidal function of gantry angle, including gantry angle itself, MLC position and linac output. Two commercial QA systems, ArcCheck and Delta4, and an in-house developed EPID technique were compared in this study. Fifteen full arcs from head and neck plans were selected and modified to include five magnitudes of each type of error, resulting in measurements and γ analyses of 240 arcs on each system. Both qualitative and quantitative comparisons were performed using receiver operating characteristic (ROC), γ pass rate gradient, and overlap histogram methods.ResultsIn ROC analysis, the area under curve (AUC) represents the sensitivity and increases with the error magnitude. Using the criteria of 2 %/2 mm/2° (angle to agreement, ATA, only for EPID) and keeping AUC > 0.95, the minimum error detectable of ArcCheck, Delta4 and EPID are (2, 3, 3)° in gantry angle and (4, 2, 3) mm in MLC positions for the head and neck plans. No system is sensitive to the simulated output error, the AUC values were all below 0.70 even with 5 % output error. The γ gradient for gantry angle, MLC position and output errors are (−5.1, −2.6, −3.6)%/°, (−2.6, −7.1, −3.3)%/mm and (−0.2, −0.2, −0.3)%/% for ArcCheck, Delta4 and EPID, respectively. Therefore, these two analyses are consistent and support the same conclusion. The ATA parameter in EPID technique can be adjusted to tune its sensitivity.ConclusionsWe found that ArcCheck is more sensitive to gantry angle error and Delta4 is more sensitive to MLC position error. All three systems are not sensitive to the simulated output error. With additional analysis parameter, the EPID technique can be tuned to have optimal sensitivity and is able to perform QA for full field size with highest resolution. In addition, ROC analysis avoids the choice of γ pass rate threshold and is more robust compared with other analysis methods.

In recent years, intelligent fault diagnosis technology with the deep learning algorithm has been widely used in the manufacturing industry for substituting time-consuming human analysis method to enhance the efficiency of fault diagnosis. The rolling bearing as the connection between the rotor and support is the crucial component in rotating equipment. However, the working condition of the rolling bearing is under changing with complex operation demand, which will significantly degrade the performance of the intelligent fault diagnosis method. In this paper, a new deep transfer model based on Wasserstein distance guided multi-adversarial networks (WDMAN) is proposed to address this problem. The WDMAN model exploits complex feature space structures to enable the transfer of different data distributions based on multiple domain critic networks. The essence of our method is learning the shared feature representation by minimizing the Wasserstein distance between the source domain and target domain distribution in an adversarial training way. The experiment results demonstrate that our model outperforms the state-of-the-art methods on rolling bearing fault diagnosis under different working conditions. The t-distributed stochastic neighbor embedding (t-SNE) technology is used to visualize the learned domain invariant feature and investigate the transferability behind the great performance of our proposed model. INDEX TERMS Transfer learning, fault diagnosis, convolutional neural network, multi-adversarial networks.

Radiation pneumonitis (RP) is one of the major side effects of thoracic radiotherapy. The aim of this study is to build a dose distribution based prediction model, and investigate the correlation of RP incidence and high-order features of dose distribution. A convolution 3D (C3D) neural network was used to construct the prediction model. The C3D network was pre-trained for action recognition. The dose distribution was used as input of the prediction model. With the C3D network, the convolution operation was performed in 3D space. The guided gradient-weighted class activation map (grad-CAM) was utilized to locate the regions of dose distribution which were strongly correlated with grade≥2 and grade<2 RP cases, respectively. The features learned by the convolution filters were generated with gradient ascend to understand the deep network. The performance of the C3D prediction model was evaluated by comparing with three multivariate logistic regression (LR) prediction models, which used the dosimetric, normal tissue complication probability (NTCP) or dosiomics factors as input, respectively. All the prediction models were validated using 70 non-small cell lung cancer (NSCLC) patients treated with volumetric modulated arc therapy (VMAT). The area under curve (AUC) of C3D prediction model was 0.842. While the AUC of the three LR models were 0.676, 0.744 and 0.782, respectively. The guided grad-CAM indicated that the low-dose region of contralateral lung and high-dose region of ipsilateral lung were strongly correlated with the grade≥2 and grade<2 RP cases, respectively. The features learned by shallow filters were simple and globally consistent, and of monotonous color. The features of deeper filters displayed more complicated pattern, which was hard or impossible to give strict mathematical definition. In conclusion, we built a C3D model for thoracic radiotherapy toxicity prediction. The results demonstrate its performance is superior over the classical LR models. In addition, CNN also offers a new perspective to further understand RP incidence.

Unsupervised outlier detection is a vital task and has high impact on a wide variety of applications domains, such as image analysis and video surveillance. It also gains long-standing attentions and has been extensively studied in multiple research areas. Detecting and taking action on outliers as quickly as possible are imperative in order to protect network and related stakeholders or to maintain the reliability of critical systems. However, outlier detection is difficult due to the one class nature and challenges in feature construction. Sequential anomaly detection is even harder with more challenges from temporal correlation in data, as well as the presence of noise and high dimensionality. In this paper, we introduce a novel deep structured framework to solve the challenging sequential outlier detection problem. We use autoencoder models to capture the intrinsic difference between outliers and normal instances and integrate the models to recurrent neural networks that allow the learning to make use of previous context as well as make the learners more robust to warp along the time axis. Furthermore, we propose to use a layerwise training procedure, which significantly simplifies the training procedure and hence helps achieve efficient and scalable training. In addition, we investigate a fine-tuning step to update all parameters set by incorporating the temporal correlation in the sequence. We further apply our proposed models to conduct systematic experiments on five real-world benchmark data sets. Experimental results demonstrate the effectiveness of our model, compared with other state-of-the-art approaches.

No abstract