Low nitrogen (N) utilization efficiency due to environmental N losses from fertilizers results in high-cost on-farm production. Urea coating with biodegradable polymers can prevent these losses by controlling the N release of fertilizers. We calculated N release kinetics of coated granular with various biodegradable polymeric materials and its impact on spinach yield and N uptake. Different formulations were used, (i) G-1: 10% starch + 5% polyvinyl alcohol (PVA) + 5% molasses; (ii) G-2: 10% starch + 5% PVA + 5% paraffin wax (PW); (iii) G-3: 5% gelatin + 10% gum arabic + 5% PW; (iv) G-4: 5% molasses + 5% gelatin + 10% gum arabic, to coat urea using a fluidized bed coater. The morphological and X-ray diffraction (XRD) analyses indicated that a uniform coating layer with no new phase formation occurred. In the G-2 treatment, maximum crushing strength (72.9 N) was achieved with a slowed-down N release rate and increased efficiency of 31%. This resulted in increased spinach dry foliage yield (47%), N uptake (60%) and apparent N recovery (ANR: 130%) from G-2 compared to uncoated urea (G-0). Therefore, coating granular urea with biodegradable polymers is a good choice to slower down the N release rate and enhances the crop yield and N utilization efficiency from urea.
Biomaterials are in use for the replacement and reconstruction of several tissues and organs as treatment and enhancement. Metallic, organic, and composites are some of the common materials currently in practice. Metallic materials contribute a big share of their mechanical strength and resistance to corrosion properties, while organic polymeric materials stand high due to their biocompatibility, biodegradability, and natural availability. To enhance the biocompatibility of these metals and alloys, coatings are frequently applied. Organic polymeric materials and ceramics are extensively utilized for this purpose due to their outstanding characteristics of biocompatibility and biodegradability. Hydroxyapatite (HAp) is the material from the ceramic class which is an ultimate candidate for coating on these metals for biomedical applications. HAp possesses similar chemical and structural characteristics to normal human bone. Due to the bioactivity and biocompatibility of HAp, it is used for bone implants for regenerating bone tissues. This review covers an extensive study of the development of HAp coatings specifically for the orthopaedic applications that include different coating techniques and the process parameters of these coating techniques. Additionally, the future direction and challenges have been also discussed briefly in this review, including the coating of HAp in combination with other calcium magnesium phosphates that occur naturally in human bone.
The application of urea-based fertilizers in developing countries has gained significant momentum over time. urea usage is to meet demand and supply gap of food resources as world population is increasing at a fast pace. urea contains largest content of nitrogen (46%) among all the solid nitrogenous fertilizers. However, main drawback of urea is its higher dissolution rate. After soil application, most of urea nitrogen is lost through a leaching, runoff, nitrification-denitrification and ammonia volatilization. To tackle urea related environmental pollution, development of slow-release urea fertilizer is a need of the hour and this would also increase product use efficiency in terms of crop productivity and its N uptake. We studied the usage of polymeric materials in combination with inorganic substances like sulfur and plaster of Paris as effective and biodegradable coating substances for urea prills. For coating on urea prills, fluidized bed coater was used whereas paraffin wax and molasses were used as binding agents. The urea was coated with four different formulations, i.e., C-1: PVA 5% + plaster of Paris 10% + sulfur 5% + paraffin wax 2%, C-2: PVA 5% + starch 10% + sulfur 5% + paraffin wax 2%, C-3: gelatin 5% + plaster of Paris 10% + sulfur 5% + paraffin wax 2% and C-4: PVA 5% + starch 10% + sulfur 5% + paraffin wax 2.5% + molasses 2.5%. Each formulation along with uncoated urea prills (C-0) were evaluated for characterization and N release kinetics. All the formulations along with uncoated urea were applied to spinach crop in pot experiment. A control (No N: untreated) was also kept. Spinach biomass yield and N uptake were determined. The formulation C-1 yielded highest urea-N release efficiency and spinach N uptake of6.87% and 1.93 g N/pot, respectively. Themodified Schwarz and Sinclair formula gave the excellent representation of release of nutrient-N from coated urea prills. It is concluded that coating urea prills with organic and inorganic blends is better option to slow down N release kinetics and improve spinach productivity. Therefore, by using coated fertilizers, farmers can improve agro-environmental value of urea, worldwide.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.