Hybrid micro/nanostructures and light-absorbing pigment of melanin are two key factors for the excellent antireflective properties of the butterfly wings of Ornithoptera goliath. In this work, femtosecond laser ablation of metals in an organic solvent (FLAMOS) was used to generate hybird micro/ nanostructured cross-linked ultrahigh/low spatial frequency laserinduced periodic surface structures (UHSFLs/LSFLs), which well mimic the antireflective architecture of Ornithoptera goliath. The simultaneously deposited carbon or newly formed transition metal carbide (TMC) plays the same role of light-absorbing pigment of melanin on Ornithoptera goliath. A total of 13 transition metals and one transition-metal alloy

In this study, we demonstrate a technique termed underwater persistent bubble assisted femtosecond laser ablation in liquids (UPB-fs-LAL) that can greatly expand the boundaries of surface micro/nanostructuring through laser ablation because of its capability to create concentric circular macrostructures with millimeter-scale tails on silicon substrates. Long-tailed macrostructures are composed of layered fan-shaped (central angles of 45°–141°) hierarchical micro/nanostructures, which are produced by fan-shaped beams refracted at the mobile bubble interface (≥50° light tilt, referred to as the vertical incident direction) during UPB-fs-LAL line-by-line scanning. Marangoni flow generated during UPB-fs-LAL induces bubble movements. Fast scanning (e.g. 1 mm s−1) allows a long bubble movement (as long as 2 mm), while slow scanning (e.g. 0.1 mm s−1) prevents bubble movements. When persistent bubbles grow considerably (e.g. hundreds of microns in diameter) due to incubation effects, they become sticky and can cause both gas-phase and liquid-phase laser ablation in the central and peripheral regions of the persistent bubbles. This generates low/high/ultrahigh spatial frequency laser-induced periodic surface structures (LSFLs/HSFLs/UHSFLs) with periods of 550–900, 100–200, 40–100 nm, which produce complex hierarchical surface structures. A period of 40 nm, less than 1/25th of the laser wavelength (1030 nm), is the finest laser-induced periodic surface structures (LIPSS) ever created on silicon. The NIR-MIR reflectance/transmittance of fan-shaped hierarchical structures obtained by UPB-fs-LAL at a small line interval (5 μm versus 10 μm) is extremely low, due to both their extremely high light trapping capacity and absorbance characteristics, which are results of the structures’ additional layers and much finer HSFLs. In the absence of persistent bubbles, only grooves covered with HSFLs with periods larger than 100 nm are produced, illustrating the unique attenuation abilities of laser properties (e.g. repetition rate, energy, incident angle, etc) by persistent bubbles with different curvatures. This research represents a straightforward and cost-effective approach to diversifying the achievable hierarchical micro/nanostructures for a multitude of applications.

In this work, we present the possibility of producing multiscale hierarchical micro/nanostructures by the femtosecond laser ablation of transition metals (i.e., Ta and W) in water and investigate their polarization-dependent reflectance. The hierarchical micro/nanostructures are composed of microscale-grooved, mountain-like and pit-rich structures decorated with hybrid laser-induced periodic surface structures (LIPSSs). The hybrid LIPSSs consist of low/high and ultrahigh spatial frequency LIPSSs (LSFLs/HSFLs and UHSFLs). LSFLs/HSFLs of 400–600 nm in a period are typically oriented perpendicular to the direction of the laser polarization, while UHSFLs (widths: 10–20 nm and periods: 30–50 nm) are oriented perpendicular to the curvatures of LSFLs/HSFLs. On the microstructures with height gradients, the orientations of LSFLs/HSFLs are misaligned by 18°. On the ablated W metasurface, two kinds of UHSFLs are observed. UHSFLs become parallel nanowires in the deep troughs of LSFLs/HSFLs but result in being very chaotic in shallow LSFLs, turning into polygonal nanonetworks. In contrast, chaotic USFLs are not found on the ablated Ta metasurfaces. With the help of Fourier transform infrared spectroscopy, it is found that microgrooves show an obvious polarization-dependent reflectance at wavelengths of 15 and 17.5 μm associated with the direction of the groove, and the integration of microstructures with LSFs/HSFLs/UHSFLs is thus beneficial for enhancing the light absorbance and light trapping in the near-to-mid-infrared (NIR-MIR) range.

Plasmonics-based nanoimaging techniques have recently attracted significant attention owing to their ability to confine light to the nanoscale for super-resolution imaging. A recent report has theoretically predicted that a plasmonic nanolens, a well-designed array of metallic nanorod chains, can produce a magnified color image of subwavelength objects through a plasmonic transfer of near-field light as a new class of nanoimaging technique. In this study, we fabricate a gold-nanorod chain through a self-assembly method to experimentally validate this concept, and observe the plasmonic transfer of near-field light from subwavelength objects, which demonstrates the significant potential of plasmonic nanolens for super-resolution imaging.

Plasmonic nanolens, a 3-dimensional tapered arrangement of metallic nanorod chains, holds a great promise as a new plasmonics-based optical nano-imaging technique. While multiple nanorod chains can transfer the near-field signal originating from a sample to an image at a distance larger than a micro-meter, where each nanorod chain contributes in forming one pixel in the image, the tapered arrangement of the nanorod chains with a certain taper angle allows image magnification. We experimentally demonstrate the feature of image formation and magnification in a nanolens by fabricating a tapered arrangement of two silver nanorod chains, which were separated by a distance smaller than the diffraction limit at one end and larger than the diffraction limit at the other end. We placed two nano-sized optical sources of quantum dots near the first ends of the chains, which served as two subwavelength objects. In the optical measurement, we demonstrated that the unresolved subwavelength optical sources could be imaged at the other ends of the chains and were well resolved in accordance with the magnification feature of a nanolens. This verification is an experimental proof of the image magnification, and an important step toward the realization of plasmonic nanolens.