The novel controlled and localized delivery of drug molecules to target tissues using an external electric stimulus makes electro-responsive drug delivery systems both feasible and desirable, as well as entailing a reduction in the side effects. Novel micro-scaffold matrices were designed based on poly(lactic acid) (PLA) and graphene oxide (GO) via electrospinning. Quercetin (Q), a natural flavonoid, was loaded into the fiber matrices in order to investigate the potential as a model drug for wound dressing applications. The physico-chemical properties, electrical triggering capacity, antimicrobial assay and biocompatibility were also investigated. The newly fabricated PLA/GO/Q scaffolds showed uniform and smooth surface morphologies, without any beads, and with diameters ranging from 1107 nm (10%PLA/0.1GO/Q) to 1243 nm (10%PLA). The in vitro release tests of Q from the scaffolds showed that Q can be released much faster (up to 8640 times) when an appropriate electric field is applied compared to traditional drug-release approaches. For instance, 10 s of electric stimulation is enough to ensure the full delivery of the loaded Q from the 10%PLA/1%GO/Q microfiber scaffold at both 10 Hz and at 50 Hz. The antimicrobial tests showed the inhibition of bacterial film growth. Certainly, these materials could be loaded with more potent agents for anti-cancer, anti-infection, and anti-osteoporotic therapies. The L929 fibroblast cells cultured on these scaffolds were distributed homogeneously on the scaffolds, and the highest viability value of 82.3% was obtained for the 10%PLA/0.5%GO/Q microfiber scaffold. Moreover, the addition of Q in the PLA/GO matrix stimulated the production of IL-6 at 24 h, which could be linked to an acute inflammatory response in the exposed fibroblast cells, as a potential effect of wound healing. As a general conclusion, these results demonstrate the possibility of developing graphene oxide-based supports for the electrically triggered delivery of biological active agents, with the delivery rate being externally controlled in order to ensure personalized release.
In this study, a facile, eco-friendly route, in two steps, for obtaining of poly-L-lactic acid/chitosan-silver nanoparticles scaffolds under quiescent conditions was presented. The method consists of plasma treatment and then wet chemical treatment of poly-L-lactic acid (PLLA) films in a chitosan based-silver nanoparticles solution (Cs/AgNp). The changes of the physical and chemical surface proprieties were studied using scanning electron microscopy (SEM), small angle X-Ray scattering (SAXS), Fourier transform infrared spectroscopy (FTIR) and profilometry methods. A certain combination of plasma treatment and chitosan-based silver nanoparticles solution increased the biocompatibility of PLLA films in combination with cell line seeding as well as the antimicrobial activity for gram-positive and gram-negative bacteria. The sample that demonstrated from Energy Dispersive Spectroscopy (EDAX) to have the highest amount of nitrogen and the smallest amount of Ag, proved to have the highest value for cell viability, demonstrating better biocompatibility and very good antimicrobial proprieties.
The current trend in antimicrobial-agent development focuses on the use of natural compounds that limit the toxicity of conventional drugs and provide a potential solution to the antimicrobial resistance crisis. Curcumin represents a natural bioactive compound with well-known antimicrobial, anticancer, and antioxidant properties. However, its hydrophobicity considerably limits the possibility of body administration. Therefore, dextran-coated iron oxide nanoparticles can be used as efficient drug-delivery supports that could overcome this limitation. The iron oxide nanoparticles were synthesized through the microwave-assisted hydrothermal method by varying the treatment parameters (pressure and reaction time). The nanoparticles were subsequently coated with dextran and used for the loading of curcumin (in various concentrations). The drug-delivery systems were characterized through X-ray diffraction (XRD) coupled with Rietveld refinement, transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), selected area electron diffraction (SAED), dynamic light scattering (DLS) and zeta potential, thermogravimetry and differential scanning calorimetry (TG-DSC), vibrating sample magnetometry (VSM), and UV-Vis spectrophotometry, as well as regarding their antimicrobial efficiency and biocompatibility using the appropriate assays. The results demonstrate a promising antimicrobial efficiency, as well as an increased possibility of controlling the properties of the resulted nanosystems. Thus, the present study represents an important step forward toward the development of highly efficient antimicrobial drug-delivery systems.
The purpose of this paper was to characterize and investigate the antimicrobial potential of Amorpha fruticosa fruits essential oil (EO). The EO was extracted by hydrodistillation, analyzed by GC-MS, and then evaluated for its interaction with microbial and mammalian cells. The antimicrobial activity was assessed against bacterial and fungal strains, in a planktonic and adherent growth state, using qualitative and quantitative assays. The main components identified in A. fruticosa fruits EO were δ-cadinene, γ-muurolene, and α-muurolene. The Gram-positive strains proved to be more susceptible than Gram-negative bacteria and fungal strains. The EO exhibited good antibiofilm activity, inhibiting the microbial adherence to the inert (96-well plates and Foley catheter section) and cellular substrata. The flow cytometry analysis revealed as one of the possible mechanisms of antimicrobial action the alteration of cell membrane hydrophobicity. The cytotoxicity on the L929 cell line occurred at concentrations higher than 0.3 mg/mL. Taken together, our results demonstrate that A. fruticosa fruits EO contains active compounds with selective inhibitory effect on different microbial strains in planktonic and biofilm growth state, explained at least partially by the interference with microbial membranes due to their hydrophobic character.
In the COVID-19 pandemic context, numerous concerns have been raised regarding the hygienic status of certain objects we interact with on a daily basis, and especially cash money and their potential to harbor and transmit pathogenic bacteria. Therefore, in the present study, we analyzed different currency bills represented by British pounds (5£, 10£ and 20£), Romanian lei (1 leu, 5 lei and 10 lei), U.S. dollars (1$, 5$ and 10$) and Euros (5€, 10€ and 20€) in order to evaluate the bacterial survival rate and bacterial adherence. We used five reference microorganisms by American Type Culture Collection (ATCC, Manassas, VA, USA): Staphylococcus aureus ATCC 6538, Escherichia coli ATCC 8739, Enterococcus sp. ATCC 19952, Salmonella enterica subsp. enterica serovar Typhi ATCC 6539, and Listeria monocytogenes ATCC 7644. Microorganisms were selected in accordance with the criteria of prevalence, pathogenicity, opportunism, and incidence. However, Maldi-TOF analysis from samples taken from the banknotes revealed only a few of the common pathogens that are traditionally thought to be found on banknotes. Some of the most important factors for the survival of pathogenic agents on surfaces are the presence of organic matter, temperature and humidity. Our data showed that Salmonella enterica survived 72 h on every banknote tested, while L. monocytogenes tended to improve persistence in humid conditions. Survival rate is also influenced by the substrate composition, being lower for polymer-based banknotes especially for Salmonella enterica, Listeria monocytogenes and Enterococcus sp. The adherence of bacterial strains was lower for polymer-based banknotes British pounds and Romanian Leu, in contrast to the cotton-based U.S dollars and Euro banknotes. The risk of bacterial contamination from the banknote bills is high as indicated by both a strong survival capacity and low adherence of tested bacteria with differences between the two types of materials used for the tested banknotes.
Hydrogel based wound dressings help to prevent development of infection by absorbing a large volume of exudate from the wound area. Zinc ion based nanoparticles are routinely reported to hold an enhanced potential to help wound healing. In this work, we have developed and characterized hydrogels with in-situ incorporated ZnO nanoparticles (NPs) with antimicrobial properties. Samples were characterized via infrared spectrometry (FTIR), swelling capacity analysis and scanning electron microscopy (SEM). ZnO incorporation lead to an increase in the swallowing rates for tested ZnO concentrations. SEM analysis revealed the presence of agglomerations of ZnO particles of micrometric dimensions (size 1,300-1,315μm) embedded in the polymeric material.The assesment of antimicrobial activity revealed some promising results in case of the liophylised hydrogels incubated with S. aureus The effect of ZnO NPs on biofilm formation was clearly evident in case of S. aureus. The number of viable cells decreased proportionally with the ZnO concentration. The preliminary results highlighted here pave the way for further in vivo experiments in order to confirm the beneficial effects harboured by the novel ZnO hydrogels on host wound healing.
Nutraceuticals are experiencing a high-rise use nowadays, which is incomparable to a few years ago, due to a shift in consumers’ peculiarity tendencies regarding the selection of alternatives to Western medicine, potential immunity boosters, or gut-health promoters. Nutraceuticals’ compositions and actual effects should be proportional to their sought-after status, as they are perceived to be the middle ground between pharma rigor and naturally occurring actives. Therefore, the health benefits via nutrition, safe use, and reduction of potential harm should be the main focus for manufacturers. In this light, this study assess the nutritional profile (proteins, fats, fibers, caloric value, minerals) of a novel formulated nutraceutical, its physico-chemical properties, FTIR spectra, antioxidant activity, anthocyanins content, and potential hazards (heavy metals and microbiological contaminants), as well as its cytotoxicity, adherence, and invasion of bacteria on HT-29 cells, as well as its evaluation of beneficial effect, potential prebiotic value, and duplicity effect on gut microbiota in correlation with Regulation (EC) No 1924/2006. The results obtained indicate the growth stimulation of Lb. rhamnosus and the inhibitory effects of E.coli, Ent. Faecalis and Lc. lactis. The interaction between active compounds suggested a modulator effect of the intestinal microbiota by reducing the number of bacteria that adhere to epithelial cells or by inhibiting their growth.
In this paper, novel drug delivery systems (DDS) were designed based on graphene oxide (GO) as nanocarrier, loaded with two natural substances (quercetin (Qu) and juglone (Ju)) at different concentrations. The chemical structure and morphology of the synthesized GO-based materials were characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and Raman spectroscopy. The antibacterial activity was evaluated against standard strains, Staphylococcus aureus ATCC 6538, Escherichia coli ATCC 8739, and Candida albicans ATCC 10231. Results demonstrated excellent antimicrobial activity, with a 5 log reduction of E. coli and a 1 log to 3.04 log reduction of S. aureus populations. Reduction rates were above 90%. Biocompatibility tests were also performed on GO-based materials, and the results showed biocompatible behavior for both L929 fibroblast cell line and BT474 breast cancer cells at lower concentrations. The identity of Qu and Ju was demonstrated by matrix-assisted laser desorption/ionization (MALDI) analysis, showing the compounds’ mass with high accuracy. In addition, specific properties of GO made it a versatile matrix for the MALDI analysis. The results of this study indicated that GO-based platforms may be suitable for applications in many areas for the effective and beneficial use of hydrophobic compounds such as Ju and Qu.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.