Modern power distribution systems require reliable, self-organizing and highly scalable voltage control systems, which should be able to promptly compensate the voltage fluctuations induced by intermittent and non-programmable generators. However, their deployment in realistic operation scenarios is still an open issue due, for example, to the presence of non-ideal and unreliable communication systems that allow each component within the power network to share information about its state. Indeed, due to technological constraints, time-delays in data acquisition and transmission are unavoidable and their effects have to be taken into account in the control design phase. To this aim, in this paper, we propose a fully distributed cooperative control protocol allowing the voltage control to be achieved despite the presence of heterogeneous time-varying latencies. The idea is to exploit the distributed intelligence along the network, so that it is possible to bring out an optimal global behavior via cooperative distributed control action that leverages both local and the outdated information shared among the devices within the power network. Detailed simulation results obtained on the realistic case study of the IEEE 30-bus test system are presented and discussed in order to prove the effectiveness of the proposed approach in the task of solving complex voltage control problems. Finally, a robustness analysis with respect to both loads variations and hard communication delays was also carried to disclose the efficiency of the approach.

No abstract

No abstract

No abstract

This paper addresses the leader tracking problem for a platoon of heterogeneous autonomous connected fully electric vehicles where the selection of the inter-vehicle distance between adjacent vehicles plays a crucial role in energy consumption reduction. In this framework, we focused on the design of a cooperative driving control strategy able to let electric vehicles move as a convoy while keeping a variable energy-oriented inter-vehicle distance between adjacent vehicles which, depending on the driving situation, was reduced as much as possible to guarantee air-drag reduction, energy saving and collision avoidance. To this aim, by exploiting a distance-dependent air drag coefficient formulation, we propose a novel distributed nonlinear model predictive control (DNMPC) where the cost function was designed to ensure leader tracking performances, as well as to optimise the inter-vehicle distance with the aim of reducing energy consumption. Extensive simulation analyses, involving a comparative analysis with respect to the classical constant time headway (CTH) spacing policy, were performed to confirm the capability of the DNMPC in guaranteeing energy saving.

The Multiple Microgrids (MMGs) concept has been identified as a promising solution for the management of large-scale power grids in order to maximize the use of widespread renewable energies sources. However, its deployment in realistic operation scenarios is still an open issue due to the presence of non-ideal and unreliable communication systems that allow each component within the power network to share information about its state. Indeed, due to technological constraints, multiple time-varying communication delays consistently appear during data acquisition and the transmission process and their effects must be considered in the control design phase. To this aim, this paper addresses the voltage regulation control problem for MMGs systems in the presence of time-varying communication delays. To solve this problem, we propose a novel hierarchical two-layer distributed control architecture that accounts for the presence of communication latencies in the information exchange. More specifically, the upper control layer aims at guaranteeing a proper and economical reactive power dispatch among MMGs, while the lower control layer aims at ensuring voltage regulation of all electrical buses within each MG to the desired voltage set-point. By leveraging a proper Driver Generator Nodes Selection Algorithm, we first provide the best choice of generator nodes which, considering the upper layer control goal, speeds up the voltage synchronization process of all the buses within each MG to the voltage set-point computed by the upper-control layer. Then, the lower control layer, on the basis of this desired voltage value, drives the reactive power capability of each smart device within each MG and compensates for possible voltage deviations. Simulation analysis is carried out on the realistic case study of an MMGs system consisting of two identical IEEE 14-bus test systems and the numerical results disclose the effectiveness of the proposed control strategy, as well as its robustness with respect to load fluctuations.

PurposeThis work aims at proposing a novel Internet of Things (IoT)-based and cloud-assisted monitoring architecture for smart manufacturing systems able to evaluate their overall status and detect eventual anomalies occurring into the production. A novel artificial intelligence (AI) based technique, able to identify the specific anomalous event and the related risk classification for possible intervention, is hence proposed.Design/methodology/approachThe proposed solution is a five-layer scalable and modular platform in Industry 5.0 perspective, where the crucial layer is the Cloud Cyber one. This embeds a novel anomaly detection solution, designed by leveraging control charts, autoencoders (AE) long short-term memory (LSTM) and Fuzzy Inference System (FIS). The proper combination of these methods allows, not only detecting the products defects, but also recognizing their causalities.FindingsThe proposed architecture, experimentally validated on a manufacturing system involved into the production of a solar thermal high-vacuum flat panel, provides to human operators information about anomalous events, where they occur, and crucial information about their risk levels.Practical implicationsThanks to the abnormal risk panel; human operators and business managers are able, not only of remotely visualizing the real-time status of each production parameter, but also to properly face with the eventual anomalous events, only when necessary. This is especially relevant in an emergency situation, such as the COVID-19 pandemic.Originality/valueThe monitoring platform is one of the first attempts in leading modern manufacturing systems toward the Industry 5.0 concept. Indeed, it combines human strengths, IoT technology on machines, cloud-based solutions with AI and zero detect manufacturing strategies in a unified framework so to detect causalities in complex dynamic systems by enabling the possibility of products’ waste avoidance.

No abstract