No abstract

No abstract

No abstract

No abstract

In recent years, researchers have conducted many studies on the design and control of prosthesis devices that take the place of a missing limb. Functional ability of prosthesis hands that mimic biological hand functions increases depending on the number of independent finger movements possible. From this perspective, in this study, six different finger movements were given to a prosthesis hand via bioelectrical signals, and the functionality of the prosthesis hand was increased. Bioelectrical signals were recorded by surface electromyography for four muscles with the help of surface electrodes. The recorded bioelectrical signals were subjected to a series of preprocessing and feature extraction processes. In order to create meaningful patterns of motion and an effective cognitive interaction network between the human and the prosthetic hand, fuzzy logic classification algorithms were developed. A five-fingered and 15-jointed prosthetic hand was designed via SolidWorks, and a prosthetic prototype was produced by a 3D printer. In addition, prosthetic hand simulator was designed in Matlab/SimMechanics. Pattern control of both the simulator and the prototype hand in real time was achieved. Position control of motors connected to each joint of the prosthetic hand was provided by a PID controller. Thus, an effective cognitive communication network established between the user, and the real-time pattern control of the prosthesis was provided by bioelectrical signals.

No abstract

Human hands and fingers are of significant importance in people’s capacity to perform daily tasks (touching, feeling, holding, gripping, writing). However, about 1.5 million people around the world are suffering from injuries, muscle and neurological disorders, a loss of hand function, or a few fingers due to stroke. This paper focuses on newly developed finger orthotics, which is thin, adaptable to the length of each finger and low energy costs. The aim of the study is to design and control a new robotic orthosis using for daily rehabilitation therapy. Kinematic and dynamic analysis of orthosis was calculated and the joint regulation of orthosis was obtained. The Lagrange method was used to obtain dynamics, and the Denavit–Hartenberg (D–H) method was used for kinematic analysis of hand. In order to understand its behavior, the robotic finger orthotics model was simulated in MatLab/Simulink. The simulation results show that the efficiency and robustness of proportional integral derivative (PID) controller are appropriate for the use of robotic finger orthotics.

No abstract