Objective: With advancements in surgical equipment and procedures, human–system interactions in operating rooms affect surgeon workload and performance. Workload was measured across surgical specialties using surveys to identify potential predictors of high workload for future performance improvement. Summary Background Data: Surgical instrumentation and technique advancements have implications for surgeon workload and human–systems interactions. To understand and improve the interaction of components in the work system, NASA-Task Load Index can measure workload across various fields. Baseline workload measurements provide a broad overview of the field and identify areas most in need of improvement. Methods: Surgeons were administered a modified NASA-Task Load Index survey (0 = low, 20 = high) following each procedure. Patient and procedural factors were retrieved retrospectively. Results: Thirty-four surgeons (41% female) completed 662 surgery surveys (M = 14.85, SD = 7.94), of which 506 (76%) have associated patient and procedural data. Mental demand (M = 7.7, SD = 5.56), physical demand (M = 7.0, SD = 5.66), and effort (M = 7.8, SD = 5.77) were the highest rated workload subscales. Surgeons reported difficulty levels higher than expected for 22% of procedures, during which workload was significantly higher (P < 0.05) and procedural durations were significantly longer (P > 0.001). Surgeons reported poorer perceived performance during cases with unexpectedly high difficulty (P < 0.001). Conclusions: When procedural difficulty is greater than expected, there are negative implications for mental and physical demand that result in poorer perceived performance. Investigations are underway to identify patient and surgical variables associated with unexpected difficulty and high workload. Future efforts will focus on re-engineering the surgical planning process and procedural environment to optimize workload and performance for improved surgical care.

Recent literature has demonstrated ergonomic risk to surgeons in the operating room. One method used in other industries to mitigate these ergonomic risks is the incorporation of microbreaks. Thus, intraoperative microbreaks with exercises in a non-crossover design were studied. Fifty-six attending surgeons from 4 Medical Centers volunteered first in a day of their regular surgeries and then second day where there were microbreaks with exercises that could be performed in the sterile field, answering questions after each case, without significantly increasing the duration of their surgeries. Surgeons self-reported improvement or no change in their mental focus (88%) and physical performance (100%) for the surgical day incorporating microbreaks with exercises. Discomfort in the shoulders was significantly reduced while distractions and flow impact was minimal. Eighty-seven percent of the surgeons wanted to incorporate the microbreaks with exercises into their OR routine. Intraoperative microbreaks with exercises may be a way to mitigate work-related musculoskeletal fatigue, pain and injury.

The purpose of this study was to validate a commercially available IMU system against a standard lab-based motion capture system for the measurement of shoulder elevation, elbow flexion, trunk flexion/extension and neck flexion/extension kinematics. The validation analyses were applied to six surgical faculty members performing a standard, simulated surgical training task that mimics minimally invasive surgery. Three-dimensional joint kinematics were simultaneously recorded by an optical motion capture system and an IMU system with six sensors placed on the head, chest, and bilateral upper and lower arms. The sensor-to-segment axes alignment was accomplished manually. The IMU neck and trunk IMU flexion/extension angles were accurate to within 2.9±0.9 degrees and 1.6±1.1 degrees, respectively. The IMU shoulder elevation measure was accurate to within 6.8±2.7 degrees and the elbow flexion measure was accurate to within 8.2±2.8 degrees. In the Bland-Altman analyses, there were no significant systematic errors present; however, there was a significant inversely proportional error across all joints. As the gold standard measurement increased, the IMU underestimated the magnitude of the joint angle. This study reports acceptable accuracy of a commercially available IMU system; however, results should be interpreted as protocol specific.

Many surgeons are concerned about career-ending or limiting musculoskeletal pain. Intraoperative TSMB may represent a practical, effective means to reduce surgeon pain, enhance performance, and increase mental focus without extending operative time.