The ability of robotic rehabilitation devices to support paralysed end-users is ultimately limited by the degree to which human-machine-interaction is designed to be effective and efficient in translating user intention into robotic action. Specifically, we evaluate the novel possibility of binocular eye-tracking technology to detect voluntary winks from involuntary blink commands, to establish winks as a novel low-latency control signal to trigger robotic action. By wearing binocular eye-tracking glasses we enable users to directly observe their environment or the actuator and trigger movement actions, without having to interact with a visual display unit or user interface. We compare our novel approach to two conventional approaches for controlling robotic devices based on electromyo-graphy (EMG) and speech-based human-computer interaction technology. We present an integrated software framework based on ROS that allows transparent integration of these multiple modalities with a robotic system. We use a soft-robotic SEM glove (Bioservo Technologies AB, Sweden) to evaluate how the 3 modalities support the performance and subjective experience of the end-user when movement assisted. All 3 modalities are evaluated in streaming, closed-loop control operation for grasping physical objects. We find that wink control shows the lowest error rate mean with lowest standard deviation of (0.23 ± 0.07, mean ± SEM) followed by speech control (0.35 ± 0. 13) and EMG gesture control (using the Myo armband by Thalamic Labs), with the highest mean and standard deviation (0.46 ± 0.16). We conclude that with our novel own developed eye-tracking based approach to control assistive technologies is a well suited alternative to conventional approaches, especially when combined with 3D eye-tracking based robotic end-point control.

No abstract

No abstract

Motion intention detection is fundamental in the implementation of human-machine interfaces applied to assistive robots. In this paper, multiple machine learning techniques have been explored for creating upper limb motion prediction models, which generally depend on three factors: the signals collected from the user (such as kinematic or physiological), the extracted features and the selected algorithm. We explore the use of different features extracted from various signals when used to train multiple algorithms for the prediction of elbow flexion angle trajectories. The accuracy of the prediction was evaluated based on the mean velocity and peak amplitude of the trajectory, which are sufficient to fully define it. Results show that prediction accuracy when using solely physiological signals is low, however, when kinematic signals are included, it is largely improved. This suggests kinematic signals provide a reliable source of information for predicting elbow trajectories. Different models were trained using 10 algorithms. Regularization algorithms performed well in all conditions, whereas neural networks performed better when the most important features are selected. The extensive analysis provided in this study can be consulted to aid in the development of accurate upper limb motion intention detection models.

No abstract

Stroke can be a devastating condition that impairs the upper limb and reduces mobility. Wearable robots can aid impaired users by supporting performance of Activities of Daily Living (ADLs). In the past decade, soft devices have become popular due to their inherent malleable and low-weight properties that makes them generally safer and more ergonomic. In this study, we present an improved version of our previously developed gravity-compensating upper limb exosuit and introduce a novel hand exoskeleton. The latter uses 3D-printed structures that are attached to the back of the fingers which prevent undesired hyperextension of joints. We explored the feasibility of using this integrated system in a sample of 10 chronic stroke patients who performed 10 ADLs. We observed a significant reduction of 30.3 ± 3.5% (mean ± standard error), 31.2 ± 3.2% and 14.0 ± 5.1% in the mean muscular activity of the Biceps Brachii (BB), Anterior Deltoid (AD) and Extensor Digitorum Communis muscles, respectively. Additionally, we observed a reduction of 14.0 ± 11.5%, 14.7 ± 6.9% and 12.8 ± 4.4% in the coactivation of the pairs of muscles BB and Triceps Brachii (TB), BB and AD, and TB and Pectoralis Major (PM), respectively, typically associated to pathological muscular synergies, without significant degradation of healthy muscular coactivation. There was also a significant increase of elbow flexion angle (12.1±1.5°). These results further cement the potential of using lightweight wearable devices to assist impaired users.

No abstract

In this paper we present a methodology for optimising the design of a metamaterial structure with one degree of freedom that is able to simultaneously bend and stretch. The structure is intended for assisting flexion-extension of the wrist joint. The metamaterial is comprised of serially connected, individually designed cells. The design parameters can be chosen to optimally fit a desired planar curve such as the curvature of the skin on a plane normal to the flexion/extension axis of the wrist joint. A tool for the optimised design is described and the experimental validation of the output is conducted, to show the ability of the mechanism to conform to a 2D curve, also exhibiting a change in length, which is desirable for reducing sliding and shear on the skin. The design tool allows the generation of metamaterials optimised for a multitude of other applications where actuated mechanisms must be worn by a user for rehabilitation or assistance purposes.