Resistance switching (RS) devices with ultra-thin Ta2O5 switching layer (0.5–2.0 nm) with a cell diameter of 28 nm were fabricated. The performance of the devices was tested by voltage-driven current—voltage (I-V) sweep and closed-loop pulse switching (CLPS) tests. A Ta layer was placed beneath the Ta2O5 switching layer to act as an oxygen vacancy reservoir. The device with the smallest Ta2O5 thickness (0.5 nm) showed normal switching properties with gradual change in resistance in I-V sweep or CLPS and high reliability. By contrast, other devices with higher Ta2O5 thickness (1.0–2.0 nm) showed abrupt switching with several abnormal behaviours, degraded resistance distribution, especially in high resistance state, and much lower reliability performance. A single conical or hour-glass shaped double conical conducting filament shape was conceived to explain these behavioural differences that depended on the Ta2O5 switching layer thickness. Loss of oxygen via lateral diffusion to the encapsulating Si3N4/SiO2 layer was suggested as the main degradation mechanism for reliability, and a method to improve reliability was also proposed.

Charge injection meditated switching of the ferroelectric–dielectric bilayer is quantitatively investigated by the compact model and newly introduced pulse measurement.

The chemical, physical, and electrical properties of the atomic layer deposited Hf 0.5 Zr 0.5 O 2 thin films using tetrakis(ethylmethylamino) (TEMA) and tetrakis(dimethylamino) (TDMA) precursors are compared. The ligand of the metal-organic precursors strongly affects the residual C concentration, grain size, and the resulting ferroelectric properties. Depositing Hf 0.5 Zr 0.5 O 2 films with the TDMA precursors results in lower C concentration and slightly larger grain size. These findings are beneficial to grow more ferroelectric-phase-dominant film, which mitigates its wake-up effect. From the wake-up test of the TDMA-Hf 0.5 Zr 0.5 O 2 film with a 2.8 MV/cm cycling field, the adverse wake-up effect was well suppressed up to 10 5 cycles, with a reasonably high double remanent polarization value of 40 μC/cm 2. The film also showed reliable switching up to 10 9 cycles with the 2.5 MV/cm cycling field without involving the wake-up effect but with the typical fatigue behavior.

Ti layer inserted in the TiN gate electrode effectively scavenges the oxygen in the low‐k interfacial SiO2 of the metal–ferroelectric–insulator–semiconductor (MFIS) capacitors with the ferroelectric Al‐doped HfO2 (HAO) thin film. The scavenging effect increases remanent polarization (Pr) and reduces coercive voltage (Vc) and capacitance equivalent thickness (CET) of the HAO films, particularly when the MFIS capacitor is annealed at 800 °C. Additionally, frequency dispersion of capacitance characteristics and interface trap density (Dit) calculations reveal that actively‐triggered oxygen‐scavenging effects also reduce defect or trap‐induced degradation. The Ti‐inserted MFIS structure exhibits fatigue‐free endurance and relatively low leakage current characteristics as compared to a structure without the Ti scavenging layer in high annealing temperature conditions required for crystallization of the HAO ferroelectric films.

Electroforming behaviours of Ta2O5 resistance switching memory cell with a diameter of 28 nm and different thickness (0.5–2.0 nm) of Ta2O5 layer have been examined. The devices showed a constant forming electric field of 0.54 V/nm regardless of Ta2O5 thickness. The electroforming with negative bias to top TiN electrode was ascribed to electric field‐ driven migration of oxygen vacancies, originally residing near the bottom interface, toward the top electrode interface and formation of conducting filaments. The estimated electroforming energy (0.094–0.14 eV) was favourably compared with the hopping energy of electrons from the VO site to a nearby Ta site. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)