ABSTRAKPengontrolan lampu rumah secara otomatis dapat menghemat konsumsi energi sehingga mengurangi biaya pembayaran listrik. Paper ini bertujuan membandingkan konsumsi energi listrik secara manual dengan kendali otomatis pada lampu penerangan rumah menggunakan mikrokontroler Arduino Mega 2560, karena memiliki kelebihan yaitu jumlah input/output yang banyak sehingga fleksibilitas beban lampu yang dikontrolpun bisa lebih banyak. Modul Relay berfungsi mengontrol On/Off secara otomatis. Permasalahan yang dialami jika menggunakan saklar kontak On/Off manual adalah pada saat menghidupkan atau mematikan lampu tidak pada jam yang sama karena kelalaian manusia sehingga pemakaian daya tidak terkontrol dengan baik. Hasil pengujian yang telah dilakukan selama sebulan dengan beban maksimal 300 Watt diperoleh konsumsi daya listrik yang terbaca pada kWh meter dengan menggunakan alat kendali otomatis sebesar 61,4 kWh sedangkan pada sistem manual sebesar 85,7 kWh. Sehingga di dapatkan selisih daya sebesar 24,3 kWh. Penghematan biaya listrik sebesar 35,655 (TDL; Rp 1.467,28/kWh), dengan demikian pemakaian alat kendali otomatis untuk mengontrol lampu penerangan rumah terbukti lebih hemat energi listrik dibandingkan dengan sistem manual menggunakan saklar On/Off. ABSTRACTAn automatic control of the home lights can save energy consumption, thereby reducing the cost of electricity payment. This paper aims to test the Cost Saving Energy Electricity tool with automatic control of home lighting using Arduino Mega 2560 microcontroller, because it has advantages that the number of input / output a lot so that the flexibility of the controlled light load can be more. The control system used a RTC (Real Time Clock) method, which has excess timer that can always be up-to-date. Also, the ACS-712 Current Sensor can measure the outflow current on the light load to be displayed by LCD and the Relay Module can control automaticly On/Off. However, problems experienced when using the On/Off switch contact manually that was turn on or off the light, which at the different clocks due to human negligence so that the power consumption being not well controlled. Test results that have been done for a month with a maximum load of 300 Watt was obtained electric power consumption for reading on kWh meter by using cost saving energy tool of 61.4 kWh while in the manual system of 85.7 kWh. Furthermore, it got the power difference of 24.3 kWh. The value of electricity cost savings of 35.655 (TDL, Rp 1,467.28 / kWh). Therefore, the use of cost saving energy to control home lighting automatically proved more energy efficient than the manual system using the On/Off switch.
Energi baru dan terbarukan merupakan salah satu alternatif sumber energy, seperti pembangkit listrik tenaga surya. Energi surya dimanfaatkan dengan menggunakan sel surya yang menghasilkan energi listrik berupa arus searah (Direct Current/DC). Supaya energi listrik bisa digunakan untuk beban arus bolak balik (Alternating Current/AC) maka dibuatlah inverter yang berfungsi mengkonversikan tegangan dan arus searah menjadi tegangan dan arus bolak balik. Hasil pengkonversian pada inverter konvensional biasanya menimbulkan nilai harmonisa yang bisa menyebabkan terjadinya gangguan dan kerusakan pada piranti listrik. Untuk mengurangi harmonisa maka dirancanglah inverter satu fasa lima level dengan modifikasi Pulse Width Modulation (PWM). Rancangan inverter satu fasa lima level dengan modifikasi Pulse Width Modulation diharapkan dapat menghasilkan tegangan dan arus keluaran yang relatif konstan dengan nilai harmonisa yang kecil sehingga aman digunakan untuk berbagai macam peralatan elektronik. Inverter hasil rancanganan jika dihubungkan dengan perangkat sel surya dan accumulator, bisa digunakan sebagai sumber energi listrik (energi alternatif) jika sewaktu-waktu listrik PLN mati dan juga dapat digunakan di daerah yang belum ada listrik PLN sebagai sumber energi listrik.
Energi terbarukan merupakan sumber energi berkelanjutan yang bisa dimanfaatkan sebagai energi alternatitif, salah satunya sinar matahari dengan menggunakan solar cell untuk menghasilkan energi listrik. Untuk memudahkan melakukan monitoring data solar cell, maka penelitian ini digunakan layar monitor komputer untuk menampilkan hasil monitoring akuisisi data pada panel solar cell 20 WP yang menggunakan, sensor arus ACS712, sensor tegangan FZ0430, sensor temperature LM35 dan sensor intensitas cahaya MAX44009. Penelitian ini dilakukan dengan membuat simulasi menggunakan LabVIEW dan mikrokontroler arduino uno sebagai pengakuisisi data, sehingga diperoleh pengukuran tegangan rata-rata yang dihasilkan oleh solar cell adalah 13,12 V dengan tegangan tertinggi sebesar 14,38V dan arusnya antara 0,11 A – 0,79 A. Semakin lama solar cell beroperasi semakin tinggi suhu yang terukur menggunakan sensor suhu yaitu sebesar 53.1 °C pada jam 17.00 wib, dan intensitas cahaya pada siang hari akan besar yaitu pada jam 11.00 wib – 13.30 wib dengan intensitas cahaya rata-rata 75.693 lux. Kata kunci : Akuisisi Data, Solar Cell, LabVIEW, Mikrokontroler
Garbage is a household product, which is produced every day. The household garbage becomes a big problem, if it can not be handled properly. Residents of RT 04 RW 09 Binawidya, Tampan district, city of Pekanbaru have experienced problems with waste such as unpleasant odors due to the accumulation of house yard waste before being disposed to a final disposal site. To reduce this problem, there are many solutions that can be done. One of them is to utilize organic waste from household, which is processed into Eco-Enzyme. The eco-enzymes made from household waste such as vegetable residues and fruit peels. It can produce environmentally friendly products such as floor cleaners, plant fertilizers, water purifiers and others. The eco-enzyme is very easy to make. The ingredients are used organic waste (vegetables and fruit peels), sugar and water in a ratio of 3:1:10. This paper explained the eco-enzyme production training that was given to housewives, aiming to use the waste produced by their households into useful products.
The use of controlled and efficient electrical energy can save the cost of electricity expenditure. This study aims to design the cost saving energy tool for household scale of lighting using automatic microcontroller system. The design of the appliance used the automatic control system of home lights, which setting time using RTC (Real Time Clock) and a microcontroller Arduino Mega 2560. Power supply on this system was operated to supply power all existing components and controller using Arduino Mega 2560 microcontroller. Based on the test results, the cost-saving energy tool worked as an expectation of controlling the On/Off lights automatically, the RTC and current sensors can work properly to limit the current. Therefore, this design proposed can reduce the cost of electrical energy.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.