No abstract

No abstract

Due to the high demand for rubble and aggregates for construction purposes, rubble quarries and aggregate crushers are very common. Out of the different quarry wastes, quarry dust is one, which is produced in abundance. About 20-25% of the total production in each crusher unit is left out as the waste material-quarry dust. Bulk utilization of this waste material is possible through geotechnical applications like embankments, back-fill material, sub-base material and the like. It becomes a useful additive to the natural soil to improve its strength characteristics. For the above applications one of the important engineering properties is the shear strength. The purpose of the present investigation is to understand the shear strength behavior of quarry dust and soil-quarry dust mixes.

Most of the Greater Cochin area, which is undergoing rapid industrialisation, consists of extremely soft marine clay calling for expensive deep foundations. This paper presents a study on the physical properties and engeering characteristics of Cochin marine clays. These marine clays are characterised by high Atterberg limits and natural water contents. They are moderately sensitive with liquidity indices ranging over 0.46 to 0.87.The grain size distribution shows almost equal fractions of clay and silt size with sand content varying around 20%. Use of a dispersing agent in carrying out grain size distribution test plays an important role. The fabric of these clays had been identified as flocculant. The pore water has low salinity which results in marginal changes in properties on washing.Consolidation test results showed a preconsolidation pressure of up to about 0.5 kg/cm 2 with high compression indices. Compression index vs liquid limit yielded a correlation comparable to that of published data. The undisturbed samples have a much larger coefficient of secondary consolidation as a result of flocculant fabric. These clays have very low undrained shear strength.

No abstract