The U.S. Department of Energy (DOE) is promoting the development of ethanol from lignocellulosic feedstocks as an alternative to conventional petroleum-based transportation fuels. DOE funds both fundamental and applied research in this area and needs a method for predicting cost benefits of many research proposals. To that end, the National Renewable Energy Laboratory (NREL) has modeled many potential process designs and estimated the economics of each process during the last 20 years.This report is an update of the ongoing process design and economic analyses at NREL. We envision updating this process design report at regular intervals; the purpose being to ensure that the process design incorporates all new data from NREL research, DOE funded research and other sources, and that the equipment costs are reasonable and consistent with good engineering practice for plants of this type. For the non-research areas this means using equipment and process approaches as they are currently used in industrial applications.For the last report 1 , published in 1999, NREL performed a complete review and update of the process design and economic model for the biomass-to-ethanol process utilizing co-current dilute acid prehydrolysis with simultaneous saccharification (enzymatic) and co-fermentation. The process design included the core technologies being researched by the DOE: prehydrolysis, simultaneous saccharification and co-fermentation, and cellulase enzyme production. In addition, all ancillary areas-feed handling, product recovery and purification, wastewater treatment (WWT), lignin combustor and boiler-turbogenerator, and utilities-were included. NREL engaged Delta-T Corporation (Delta-T) to assist in the process design evaluation, the process equipment costing, and overall plant integration. The process design and costing for the lignin combustor and boiler turbogenerator was reviewed by Reaction Engineering Inc. (REI) and Merrick & Company reviewed the wastewater treatment.Since then, NREL has engaged Harris Group (Harris) to perform vendor testing, process design, and costing of critical equipment identified during earlier work. This included solid/liquid separation and pretreatment reactor design and costing. Corn stover handling was also investigated to support DOE's decision to focus on corn stover as a feedstock for lignocellulosic ethanol. Working with Harris, process design and costing for these areas were improved through vendor designs, costing, and vendor testing in some cases. In addition to this work, enzyme costs were adjusted to reflect collaborative work between NREL and enzyme manufacturers (Genencor International and Novozymes Biotech) to provide a delivered enzyme for lignocellulosic feedstocks. This report is the culmination of our work and represents an updated process design and cost basis for the process using a corn stover feedstock.The process design and economic model are useful for predicting the cost benefits of proposed research. Proposed research results can be translated into mo...

No abstract

When starting limb and target locations were simultaneously visible in a visuomotor task, performance during prism exposure was nearly perfect, but aftereffects were absent. When starting limb location was not visible, accurate exposure performance was slow to develop, but aftereffects were substantial. Adaptive spatial alignment of sensorimotor spaces and strategic perceptual-motor control to coordinate sensorimotor systems are distinct processes. However, realignment is dependent on whether the exposure task evokes control strategies that enable detection of misalignment. If the task can be performed solely by coding the visible difference between limb and target locations, misalignment detection is disabled. If movement is initiated by target location and then the limb is controlled by the visible difference between target and limb, the discordance between initialized and terminal locations enables misalignment detection and realignment.

No abstract

Prism exposure produces 2 kinds of adaptive response. Recalibration is ordinary strategic remapping of spatially coded movement commands to rapidly reduce performance error. Realignment is the extraordinary process of transforming spatial maps to bring the origins of coordinate systems into correspondence. Realignment occurs when spatial discordance signals noncorrespondence between spatial maps. In Experiment 1, generalization of recalibration aftereffects from prism exposure to postexposure depended upon the similarity of target pointing limb postures. Realignment aftereffects generalized to the spatial maps involved in exposure. In Experiment 2, the 2 kinds of aftereffects were measured for 3 test positions, one of which was the exposure training position. Recalibration aftereffects generalized nonlinearly, while realignment aftereffects generalized linearly, replicating Bedford (1989, 1993a) using a more familiar prism adaptation paradigm. Recalibration and realignment require methods for distinguishing their relative contribution to prism adaptation.