This article reviews the state-of-the-art numerical calculation of wind turbine wake aerodynamics. Different computational fluid dynamics techniques for modeling the rotor and the wake are discussed. Regarding rotor modeling, recent advances in the generalized actuator approach and the direct model are discussed, as far as it attributes to the wake description. For the wake, the focus is on the different turbulence models that are employed to study wake effects on downstream turbines.

a b s t r a c tThis paper investigates the temporal accuracy of the velocity and pressure when explicit Runge-Kutta methods are applied to the incompressible Navier-Stokes equations. It is shown that, at least up to and including fourth order, the velocity attains the classical order of accuracy without further constraints. However, in case of a time-dependent gradient operator, which can appear in case of time-varying meshes, additional order conditions need to be satisfied to ensure the correct order of accuracy. Furthermore, the pressure is only first-order accurate unless additional order conditions are satisfied. Two new methods that lead to a second-order accurate pressure are proposed, which are applicable to a certain class of three-and four-stage methods. A special case appears when the boundary conditions for the continuity equation are independent of time, since in that case the pressure can be computed to the same accuracy as the velocity field, without additional cost. Relevant computations of decaying vortices and of an actuator disk in a time-dependent inflow support the analysis and the proposed methods.

a b s t r a c tEnergy-conserving methods have recently gained popularity for the spatial discretization of the incompressible Navier-Stokes equations. In this paper implicit Runge-Kutta methods are investigated which keep this property when integrating in time. Firstly, a number of energy-conserving Runge-Kutta methods based on Gauss, Radau and Lobatto quadrature are constructed. These methods are suitable for convection-dominated problems (such as turbulent flows), because they do not introduce artificial diffusion and are stable for any time step. Secondly, to obtain robust time-integration methods that work also for stiff problems, the energy-conserving methods are extended to a new class of additive Runge-Kutta methods, which combine energy conservation with L-stability. In this class, the Radau IIA/B method has the best properties. Results for a number of test cases on two-stage methods indicate that for pure convection problems the additive Radau IIA/B method is competitive with the Gauss methods. However, for stiff problems, such as convectiondominated flows with thin boundary layers, both the higher order Gauss and Radau IIA/ B method suffer from order reduction. Overall, the Gauss methods are the preferred method for energy-conserving time integration of the incompressible Navier-Stokes equations.

A novel reduced-order model (ROM) formulation for incompressible flows is presented with the key property that it exhibits non-linearly stability, independent of the mesh (of the full order model), the time step, the viscosity, and the number of modes. The two essential elements to non-linear stability are: (1) first discretise the full order model, and then project the discretised equations, and (2) use spatial and temporal discretisation schemes for the full order model that are globally energy-conserving (in the limit of vanishing viscosity). For this purpose, as full order model a staggered-grid finite volume method in conjunction with an implicit Runge-Kutta method is employed. In addition, a constrained singular value decomposition is employed which enforces global momentum conservation. The resulting 'velocity-only' ROM is thus globally conserving mass, momentum and kinetic energy. For non-homogeneous boundary conditions, a (onetime) Poisson equation is solved that accounts for the boundary contribution. The stability of the proposed ROM is demonstrated in several test cases. Furthermore, it is shown that explicit Runge-Kutta methods can be used as a practical alternative to implicit time integration at a slight loss in energy conservation.