In this proof-of-concept study, we introduce and demonstrate MXene as a novel type of intercalation electrode for desalination via capacitive deionization (CDI).

We introduce a high performance hybrid electrochemical energy storage system based on an aqueous electrolyte containing tin sulfate (SnSO4) and vanadyl sulfate (VOSO4) with nanoporous activated carbon.

We report the volumetric changes of MXenes in contact with different ionic liquids and the swelling/contraction during electrochemical voltage cycling by complementing electrochemical dilatometry with in situ X-ray diffraction measurements. A drastic, initial, and irreversible volume expansion of MXenes occurs during first contact to ionic liquids (wetting). Voltage cycling evidenced a highly reversible expansion and contraction of electrodes at a very large amplitude of strain (corresponding with max. 12 vol %), which may allow the use of MXene as a high-performance electrochemical actuator.

No abstract

No abstract

Atomic layer deposition (ALD) is a facile process to decorate carbon surfaces with redox-active nanolayers. This is a particularly attractive route to obtain hybrid electrode materials for high performance electrochemical energy storage applications. Using activated carbon and carbon onions as representatives of substrate materials with large internal or external surface area, respectively, we have studied the enhanced energy storage capacity of vanadium oxide coatings. While the internal porosity of activated carbon readily becomes blocked by obstructing nanopores, carbon onions enable the continued deposition of vanadia within their large interparticle voids. Electrochemical benchmarking in lithium perchlorate in acetonitrile (1 M LiClO 4 ) showed a maximum capacity of 122 mAh/g when using vanadia coated activated carbon and 129 mAh/g for vanadia coated carbon onions. There is an optimum amount of vanadia between 50-65 wt.% for both substrates that results in an ideal balance between redox-activity and electrical conductivity of the hybrid electrode. Assembling asymmetric (charge balanced) full-cells, a maximum specific energy of 38 Wh/kg and 29 Wh/kg was found for carbon onions or activated carbon, respectively. The stability of both systems is promising, with a capacity retention of ~85-91 % after 7,000 cycles for full-cell measurements.

No abstract

Lignin-derived carbon is introduced as a promising electrode material for water desalination by using capacitive deionization (CDI). Lignin is a low-cost precursor that is obtained from the cellulose and ethanol industries, and we used carbonization and subsequent KOH activation to obtain highly porous carbon. CDI cells with a pair of lignin-derived carbon electrodes presented an initially high salt adsorption capacity but rapidly lost their beneficial desalination performance. To capitalize on the high porosity of lignin-derived carbon and to stabilize the CDI performance, we then used asymmetric electrode configurations. By using electrodes of the same material but with different thicknesses, the desalination performance was stabilized through reduction of the potential at the positive electrode. To enhance the desalination capacity further, we used cell configurations with different materials for the positive and negative electrodes. The best performance was achieved by a cell with lignin-derived carbon as a negative electrode and commercial activated carbon as a positive electrode. Thereby, a maximum desalination capacity of 18.5 mg g was obtained with charge efficiency over 80 % and excellent performance retention over 100 cycles. The improvements were related to the difference in the potential of zero charge between the electrodes. Our work shows that an asymmetric cell configuration is a powerful tool to adapt otherwise inappropriate CDI electrode materials.