The objective of this writing is to develop a methodology for the manufacture of a spur gear prototype using conventional machine tools. The purpose of this article is to help scientists and engineering students who need a guide to manufacture this type of elements that are part of a mechanical system for the transmission of movement and force. This study intends a comprehensive analysis of each step used for the manufacture of a spur gear, which allows in an objective way to determine the cutting tools and equipment necessary to carry out its manufacture, starting from the design of the element in question and applying the technical formulas necessary to adjust the parameters in the machining of the part. The methodological approach for this study has been determined based on the practical skills and experience that are paramount in the use of conventional machines. As a contribution we can say that with this methodology it will be possible to eliminate many previous problems in terms of planning and the lack of experience in handling conventional tools.
RESUMEN En los últimos años los materiales compuestos se han desarrollado para diferentes aplicaciones del área ingenieril. En este trabajo se expone primeramente un análisis de una matriz polimérica, en este caso resina epóxica para su aplicación en un material compuesto reforzado con fibras. Se presenta un estudio de las propiedades mecánicas, el cual se llevó a cabo mediante pruebas de tensión realizadas bajo el régimen de la norma ASTM D638; se manufacturaron cinco especímenes de resina los cuales llevaron un proceso de preparación de moldeo adecuado para la optimización de probetas tipo I. El objetivo fue conocer las propiedades de la matriz termoestable para así reforzarla con fibras de carbono y mejorar las propiedades del material compuesto. Posteriormente se analizaron las propiedades mecánicas del material compuesto en el cual se utilizó el refuerzo de fibra de carbono 3k. Para el análisis se fabricaron especímenes con una orientación [0/+45/-45]s; las pruebas realizadas en los especímenes de material compuesto fueron cinco ensayos de tracción basados en la norma ASTM D3039. El proceso de manufactura empleado para la realización de los especímenes de material compuesto fue el método VACCUM BAG WET LAY-UP. Se comprobó que las probetas de matriz polimérica de resina epóxica generan burbujas por el mezclado y por el curado al ambiente; así mismo estas burbujas trabajan como concentradores de tensiones que debilitan el material en pruebas de tracción. En comparación con las propiedades mecánicas del material compuesto, estos muestran un mejor comportamiento por el refuerzo de fibra de carbono y por el proceso de manufactura al vacío.
The development of new materials is driven by the search to improve and make more practical the life of man. One of the methods implemented is the electrochemical technique, in which having the ability to hermetically seal the working tools for testing new materials is very important. To evaluate the effectiveness of the seal it is necessary to carry out tests that evaluate the electrochemical flow, which allow to relate it to the behavior of the material to be analyzed. The objective of this project is to design and manufacture an Teflon insulating device (coupler or electrode holder), which can be placed on the test axis of the Rotating Disc Electrode machine, Princeton Applied Research; From the previous approaches, it is deduced the need to develop a prototype that helps to evaluate the electrical potential of the material in said equipment to be analyzed and that this assures various aspects such as functionality and ease of use.
Among the most common problems within dental professionals, is the fracture of rotary instruments of nickel and titanium root canal files (NiTi), when performing a procedure on a patient. Therefore, the objective of this work is to compare the in vitro resistance to cyclic fatigue of K3XF and TFA rotatory instruments, in continuous rotation and adaptive motion. For this, a static and cyclic fracture test was used and a fracture pattern was searched. The numbers of cycles until the fracture and the length of the fragments were determined. Of all the groups evaluated, K3XF-A exhibited the best resistance to cyclic fatigue. In future research, it will be performed an autoclaving and immersion cycles in sodium hypochlorite to be able to determine the separation causes of the rotary instruments. As a recommendation, the operator could significantly influence the decrease in resistance to cyclic fatigue due to the misuse of rotary instruments. RESUMENEntre los problemas más comunes entre los profesionistas dentales, es la fractura de los instrumentos rotatorios de limas de canales radiculares de níquel y titanio (NiTi), cuando se lleva a cabo el procedimiento al paciente. Es por eso, que el objetivo de este trabajo es el comparar la resistencia in vitro de la fractura cíclica entre los instrumentos rotatorios K3XF y TFA, en rotación continua y movimiento adaptativo. Para esto, se utilizó la prueba de fractura cíclica y estática y el patrón de fractura fue evaluado. El número de ciclos hasta la fractura y la longitud de los fragmentos fue determinado. De todos los grupos evaluados, K3XF-A presentó la mejor resistencia a la fractura cíclica. Como trabajo a futuro, se utilizará ciclos de inmersión en hipoclorito de sodio y autoclaveado, para ser capaces de determinar las causas de separación de los instrumentos rotarios. Como recomendación, el operador puede influenciar significativamente la disminución de la resistencia a la fractura cíclica utilizando de una manera errónea el dispositivo.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.