We demonstrate that peat moss, a wild plant that covers 3% of the earth's surface, serves as an ideal precursor to create sodium ion battery (NIB) anodes with some of the most attractive electrochemical properties ever reported for carbonaceous materials. By inheriting the unique cellular structure of peat moss leaves, the resultant materials are composed of three-dimensional macroporous interconnected networks of carbon nanosheets (as thin as 60 nm). The peat moss tissue is highly cross-linked, being rich in lignin and hemicellulose, suppressing the nucleation of equilibrium graphite even at 1100 °C. Rather, the carbons form highly ordered pseudographitic arrays with substantially larger intergraphene spacing (0.388 nm) than graphite (c/2 = 0.3354 nm). XRD analysis demonstrates that this allows for significant Na intercalation to occur even below 0.2 V vs Na/Na(+). By also incorporating a mild (300 °C) air activation step, we introduce hierarchical micro- and mesoporosity that tremendously improves the high rate performance through facile electrolyte access and further reduced Na ion diffusion distances. The optimized structures (carbonization at 1100 °C + activation) result in a stable cycling capacity of 298 mAh g(-1) (after 10 cycles, 50 mA g(-1)), with ∼150 mAh g(-1) of charge accumulating between 0.1 and 0.001 V with negligible voltage hysteresis in that region, nearly 100% cycling Coulombic efficiency, and superb cycling retention and high rate capacity (255 mAh g(-1) at the 210th cycle, stable capacity of 203 mAh g(-1) at 500 mA g(-1)).

Here we provide the first report on several compositions of ternary Sn-Ge-Sb thin film alloys for application as sodium ion battery (aka NIB, NaB or SIB) anodes, employing Sn50Ge50, Sb50Ge50, and pure Sn, Ge, Sb as baselines. Sn33Ge33Sb33, Sn50Ge25Sb25, Sn60Ge20Sb20, and Sn50Ge50 all demonstrate promising electrochemical behavior, with Sn50Ge25Sb25 being the best overall. This alloy has an initial reversible specific capacity of 833 mAhg(-1) (at 85 mAg(-1)) and 662 mAhg(-1) after 50 charge-discharge cycles. Sn50Ge25Sb25 also shows excellent rate capability, displaying a stable capacity of 381 mAhg(-1) at a current density of 8500 mAg(-1) (∼10C). A survey of published literature indicates that 833 mAhg(-1) is among the highest reversible capacities reported for a Sn-based NIB anode, while 381 mAhg(-1) represents the optimum fast charge value. HRTEM shows that Sn50Ge25Sb25 is a composite of 10-15 nm Sn and Sn-alloyed Ge nanocrystallites that are densely dispersed within an amorphous matrix. Comparing the microstructures of alloys where the capacity significantly exceeds the rule of mixtures prediction to those where it does not leads us to hypothesize that this new phenomenon originates from the Ge(Sn) that is able to sodiate beyond the 1:1 Na:Ge ratio reported for the pure element. Combined TOF-SIMS, EELS TEM, and FIB analysis demonstrates substantial Na segregation within the film near the current collector interface that is present as early as the second discharge, followed by cycling-induced delamination from the current collector.

A highly functionalized activated carbon with a colossal pseudocapacitance of more than 500 F g−1 was derived from biomass and used to boost the energy of an asymmetric supercapacitor tremendously.

It is a challenge to meld the energy of secondary batteries with the power of supercapacitors. Herein, we created electrodes finely tuned for this purpose, consisting of a monolayer of MnO nanocrystallites mechanically anchored by pore-surface terminations of 3D arrays of graphene-like carbon nanosheets ("3D-MnO/CNS"). The biomass-derived carbon nanosheets should offer a synthesis cost advantage over comparably performing designer nanocarbons, such as graphene or carbon nanotubes. High Li storage capacity is achieved by bulk conversion and intercalation reactions, while high rates are maintained through stable ∼20 nm scale diffusion distances. For example, 1332 mAh g(-1) is reached at 0.1 A g(-1), 567 mAh g(-1) at 5 A g(-1), and 285 mAh g(-1) at 20 A g(-1) with negligible degradation at 500 cycles. We employed 3D-MnO/CNS (anode) and carbon nanosheets (cathode) to create a hybrid capacitor displaying among the most promising performances reported: based on the active materials, it delivers 184 Wh kg(-1) at 83 W kg(-1) and 90 Wh kg(-1) at 15 000 W kg(-1) with 76% capacity retention after 5000 cycles.

A hydrothermal process was employed to create a variety of Co3O4 nanostructures. We demonstrate that nominally minor differences in the synthesis temperature (50, 70°, or 90 °C) yield profound variations in the oxide microstructure, with lath-like, necklace-like and net-like morphologies of different scales resulting. This in turn resulted in significant variations in the supercapacitive performance that ranged from mediocre to superb. Specifically, the mesoporous net-like Co3O4 nanostructures that were synthesized at 50 °C exhibited very favorable electrochemical properties: The net-like Co3O4 had a specific capacitance of 1090 F/g at a mass loading of 1.4 mg/cm2. At this high mass loading, such performance has not been previously reported. SEM and TEM analysis of these samples revealed an interconnected array of sub-10 nm crystallites interspersed with a high volume fraction of similar scale pores. The poorer performing microstructures were both coarser and much less porous.

We investigated the effect of aluminum coating layers and of the support growth substrates on the electrochemical performance of silicon nanowires (SiNWs) used as negative electrodes in lithium ion battery half-cells. Extensive TEM and SEM analysis was utilized to detail the cycling induced morphology changes in both the Al-SiNW nanocomposites and in the baseline SiNWs. We observed an improved cycling performance in the Si nanowires that were coated with 3 and 8 wt.% aluminum. After 50 cycles, both the bare and the 3 wt.% Al coated nanowires retained 2600 mAh/g capacity. However beyond 50 cycles, the coated nanowires showed higher capacity as well as better capacity retention with respect to the first cycle. Our hypothesis is that the nanoscale yet continuous electrochemically active aluminum shell places the Si nanowires in compression, reducing the magnitude of their cracking/ disintegration and the subsequent loss of electrical contact with the electrode. We combined impedance spectroscopy with microscopy analysis to demonstrate how the Al coating affects the solid electrolyte interface (SEI). A similar thickness alumina (Al 2 O 3 ) coating, grown via atomic layer deposition (ALD), was shown not to be as effective in reducing the long-term capacity loss. We demonstrate that an electrically conducting TiN barrier layer present between the nanowires and the underlying stainless steel current collector leads to a higher specific capacity during cycling and a significantly improved coulombic efficiency. Using TiN the irreversible capacity loss was only 6.9% from the initial 3581 mAh/g, while the first discharge (lithiation) capacity loss was only 4%. This is one of the best combinations reported in literature.

No abstract

No abstract