Elastomeric, fully degradable and biocompatible biomaterials are rare, with current options presenting significant limitations in terms of ease of functionalization and tunable mechanical and degradation properties. We report a new method for covalently crosslinking tyrosine residues in silk proteins, via horseradish peroxidase and hydrogen peroxide, to generate highly elastic hydrogels with tunable properties. The tunable mechanical properties, gelation kinetics and swelling properties of these new protein polymers, in addition to their ability to withstand shear strains on the order of 100%, compressive strains greater than 70% and display stiffness between 200 – 10,000 Pa, covering a significant portion of the properties of native soft tissues. Molecular weight and solvent composition allowed control of material mechanical properties over several orders of magnitude while maintaining high resilience and resistance to fatigue. Encapsulation of human bone marrow derived mesenchymal stem cells (hMSC) showed long term survival and exhibited cell-matrix interactions reflective of both silk concentration and gelation conditions. Further biocompatibility of these materials were demonstrated with in vivo evaluation. These new protein-based elastomeric and degradable hydrogels represent an exciting new biomaterials option, with a unique combination of properties, for tissue engineering and regenerative medicine.
A paradigm shift for implantable medical devices lies at the confluence between regenerative medicine, where materials remodel and integrate in the biological milieu, and technology, through the use of recently developed material platforms based on biomaterials and bioresorbable technologies such as optics and electronics. The union of materials and technology in this context enables a class of biomedical devices that can be optically or electronically functional and yet harmlessly degrade once their use is complete. We present here a fully degradable, remotely controlled, implantable therapeutic device operating in vivo to counter a Staphylococcus aureus infection that disappears once its function is complete. This class of device provides fully resorbable packaging and electronics that can be turned on remotely, after implantation, to provide the necessary thermal therapy or trigger drug delivery. Such externally controllable, resorbable devices not only obviate the need for secondary surgeries and retrieval, but also have extended utility as therapeutic devices that can be left behind at a surgical or suturing site, following intervention, and can be externally controlled to allow for infection management by either thermal treatment or by remote triggering of drug release when there is retardation of antibiotic diffusion, deep infections are present, or when systemic antibiotic treatment alone is insufficient due to the emergence of antibiotic-resistant strains. After completion of function, the device is safely resorbed into the body, within a programmable period.biomaterials | resorbable electronics | drug delivery | theranostics | silk
Traditional nanofabrication techniques often require complex lithographic steps and the use of toxic chemicals. To move from the laboratory scale to large scales, nanofabrication should be carried out using alternative procedures that are simple, inexpensive and use non-toxic solvents. Recent efforts have focused on nanoimprinting and the use of organic resists (such as quantum dot-polymer hybrids, DNA and poly(ethylene glycol)), which still require, for the most part, noxious chemicals for processing. Significant advances have been achieved using 'green' resists that can be developed with water, but so far these approaches have suffered from low electron sensitivity, line edge roughness and scalability constraints. Here, we present the use of silk as a natural and biofunctional resist for electron-beam lithography. The process is entirely water-based, starting with the silk aqueous solution and ending with simple development of the exposed silk film in water. Because of its polymorphic crystalline structure, silk can be used either as a positive or negative resist through interactions with an electron beam. Moreover, silk can be easily modified, thereby enabling a variety of 'functional resists', including biologically active versions. As a proof of principle of the viability of all-water-based silk electron-beam lithography (EBL), we fabricate nanoscale photonic lattices using both neat silk and silk doped with quantum dots, green fluorescent proteins (GFPs) or horseradish peroxidase (HRP).
A formulation of regenerated silk fibroin solution that can be easily functionalized and inkjet printed on numerous surfaces is developed. As an example, the inks can be printed on laboratory gloves that change color when exposed to bacteria.
The regeneration of structural biopolymers into micelles or nanoparticles suspended in water has enabled the design of new materials with unique and compelling properties that can serve at the interface between the biotic and the abiotic worlds. In this study, we leveraged silk fibroin quintessential properties (i.e. polymorphism, conformability and hydrophobicity) to design a water-based protein suspension that self-assembles on the surface of food upon dip coating. The water-based post-processing control of the protein polymorphism enables the modulation of the diffusion of gases through the silk fibroin thin membranes (e.g. O2 and CO2 diffusion, water vapour permeability), which is a key parameter to manage food freshness. In particular, an increased beta-sheet content corresponds to a reduction in oxygen diffusion through silk fibroin thin films. By using the dip coating of strawberries and bananas as proof of principle, we have shown that the formation of micrometre-thin silk fibroin membranes around the fruits helps the management of postharvest physiology of the fruits. Thus, silk fibroin coatings enhance fruits’ shelf life at room conditions by reducing cell respiration rate and water evaporation. The water-based processing and edible nature of silk fibroin makes this approach a promising alternative for food preservation with a naturally derived material.
Scaffolds for bone tissue engineering must meet a number of requirements such as biocompatibility, osteoconductivity, osteoinductivity, biodegradability, and appropriate biomechanical properties. A combination of type I collagen and 45S5 Bioglass may meet these requirements, however, little has been demonstrated on the effect of Bioglass on the potential of the collagen nanofibrillar three-dimensional mineralization and its influence on the structural and mechanical properties of the scaffolds. In this work, rapidly fabricated dense collagen-Bioglass hybrid scaffolds were assessed for their potential for immediate implantation. Hybrid scaffolds were conditioned, in vitro, in simulated body fluid (SBF) for up to 14 days and assessed in terms of changes in structural, chemical, and mechanical properties. MicroCT and SEM analyses showed a homogeneous distribution of Bioglass particles in the as-made hybrids. Mineralization was detected at day 1 in SBF, while ATR-FTIR microscopy and XRD revealed the presence of hydroxyl-carbonated apatite on the surface and within the two hybrid scaffolds at days 7 and 14. FTIR and SEM confirmed that the triple helical structure and typical banding pattern of fibrillar collagen was maintained as a function of time in SBF. Principal component analysis executed on ATR-FTIR microscopy revealed that the mineralization extent was a function of both Bioglass content and conditioning time in SBF. Tensile mechanical analysis showed an increase in the elastic modulus and a corresponding decrease in strain at ultimate tensile strength (UTS) as imparted by mineralization of scaffolds as a function of time in SBF and Bioglass content. Change in UTS was affected by Bioglass content. These results suggested the achievement of a hybrid matrix potentially suitable for bone tissue engineering.
In natural systems, directed self-assembly of structural proteins produces complex, hierarchical materials that exhibit a unique combination of mechanical, chemical and transport properties. This controlled process covers dimensions ranging from the nano- to the macroscale. Such materials are desirable to synthesize integrated and adaptive materials and systems. We describe a bio-inspired process to generate hierarchically defined structures with multiscale morphology by using regenerated silk fibroin. The combination of protein self-assembly and microscale mechanical constraints is used to form oriented, porous nanofibrillar networks within predesigned macroscopic structures. This approach allows us to predefine the mechanical and physical properties of these materials, achieved by the definition of gradients in nano- to macroscale order. We fabricate centimetre-scale material geometries including anchors, cables, lattices and webs, as well as functional materials with structure-dependent strength and anisotropic thermal transport. Finally, multiple three-dimensional geometries and doped nanofibrillar constructs are presented to illustrate the facile integration of synthetic and natural additives to form functional, interactive, hierarchical networks.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.