White Guinea yam (Dioscorea rotundata Poir.) is an important staple to millions of people in West Africa. Obtaining good quality planting material for yam cultivation is a major challenge. Multiplication ratios are low, and seed tubers are prone to contamination with pests and pathogens in the traditional systems of production. Some approaches to producing quality seed of yam are as follows: farmers select small whole tubers from a ware crop harvest; stimulate the production of seed tubers by 'milking' ware tubers while the leaves of the plant are still green (double harvest system); cut ware tubers into setts about the same sizes as regular seed tubers; or use the 'Anambra' system where smaller setts are cut and used to produce seed tubers. New methods that have been developed to address some of the challenges of quantity and quality of seed tubers are not yet widely applied, so farmers continue to use traditional methods and save seed from a previous harvest to plant the ware crop. This document presents an overview of traditional and modern methods of seed yam production and gives a perspective for the future. Among the modern methods of seed yam production, only the minisett technique, which uses 25-100 g tuber pieces, is currently used at farmer level, although on a limited scale. While tissue and organ culture techniques are the most rapid methods of multiplying disease free propagules, their limitations include high costs, need for skilled personnel and specialized equipment. The aeroponics and temporary immersion bioreactor methods of producing seed yam are relatively new, and still need more research. To build and sustain a viable seed yam production system, a multiplication scheme is required that combines two or more methods including tissue culture for cleaning the seed stock.

Yam (Dioscorea spp.) is a tuber crop grown for food security, income generation, and traditional medicine. This crop has a high cultural value for some of the groups growing it. Most of the production comes from West Africa where the increased demand has been covered by enlarging cultivated surfaces while the mean yield remained around 10 t tuber ha−1. In West Africa, yam is traditionally cultivated without input as the first crop after a long-term fallow as it is considered to require a high soil fertility. African soils, however, are being more and more degraded. The aims of this review were to show the importance of soil fertility for yam, discuss barriers that might limit the adoption of integrated soil fertility management (ISFM) in yam-based systems in West Africa, present the concept of innovation platforms (IPs) as a tool to foster collaboration between actors for designing innovations in yam-based systems and provide recommendations for future research. This review shows that the development of sustainable, feasible, and acceptable soil management innovations for yam requires research to be conducted in interdisciplinary teams including natural and social sciences and in a transdisciplinary manner involving relevant actors from the problem definition, to the co-design of soil management innovations, the evaluation of research results, their communication and their implementation. Finally, this research should be conducted in diverse biophysical and socio-economic settings to develop generic rules on soil/plant relationships in yam as affected by soil management and on how to adjust the innovation supply to specific contexts.

Yam (Dioscorea sp.) is an understudied tuber crop despite its importance for food security, income generation, culture, and health in West Africa. Traditional yam cropping practices in West Africa deliver low yields and lead to environmental degradation. In the context of a ‘research for development’ project, we developed and implemented a participatory and transdisciplinary research approach as a means to derive more sustainable yam production practices. We identified and studied different soil and plant management technologies adapted to varying biophysical and socio-economic contexts. For this purpose, we established innovation platforms (IPs) in four yam growing regions of West Africa, to validate the new technologies and to promote their adoption. These co-developed technologies were set up and tested first in researcher-managed plots before doing the same in farmer-managed plots. The new technologies resulted in a significant increase in yam productivity compared to conventional practices. The results discussed in the IPs gained interest from regional stakeholders and were shared through the media at local and national levels. Overall, this development-focused research approach showcases the relevance of purposeful stakeholder involvement to improve agricultural research outcomes.

Yam (Dioscorea rotundata Poir.) is a major staple and cash crop for millions of households in West Africa, where about 93% of the world crop is produced. The tuber serves as food and seed. Depending on the size, seed tubers are often cut into setts, minisetts, or planted whole. An experiment was conducted to investigate the effects of using whole tubers versus minisetts to produce seed yams. Six treatments constituted combinations of whole tubers and minisetts, and three tuber-size classes, viz., 30-59 g, 60-89 g, and 90-120 g (averaged and referred to as 45 g, 75 g, and 105 g, respectively). The experiment was conducted as a randomized complete block design with three replications. Results showed that plants from whole tubers emerged from the soil faster and yielded 48% more than those from minisetts. The mean yield of 105 g minisetts (18.3 t/ha) was statistically similar to that of 45 g whole seed (17.9 t/ha). Using 45 g whole seed would save about 2 t/ha of the harvested crop for use as food instead of seed. So, planting small whole tubers is more profitable than minisetts and is recommended to yam growers.

Lack of good-quality planting materials has been identified as the most severe problem militating against increased agricultural productivity in sub-Saharan Africa (SSA) and beyond. However, investment of research efforts and resources in addressing this menace will only be feasible and worthwhile if attendant economic gains are considerable. As a way of investigating the economic viability of yam investment, this research has been initiated to address problems confronting yam productivity in eight countries of SSA and beyond: Nigeria, Ghana, Benin, Togo, Côte d’Ivoire, Papua New Guinea, Jamaica, and Columbia. Research options developed were to be deployed and disseminated. Key technologies include the adaptive yam minisett technique (AYMT), varieties adapted to low soil fertility and drought, nematode-resistant cultivars (NRC), and crop management and postharvest practices (CMPP). This article aims at estimating the potential economic returns, the expected number of beneficiaries, and poverty reduction consequent to the adoption of technology options. Estimates show that the new land area that will be covered by the technologies in the eight countries will range between 770,000 ha and 1,000,000 ha with the highest quota accounted for by AYMT. The net present value will range between US$584 and US$1392 million and was highest for the NRC. The CMPP had the lowest benefit-cost ratio of 7.74. About 1,049,000 people would be moved out of poverty by these technologies by 2037 in the region. These technologies are less responsive to changes in cost than that in adoption rate. Therefore, the realization of the potential economic gains depends on the rate and extent of adoption of these technologies. Giving the knowledge-intensive nature of some of these interventions, capacity building of potential adopters will be critical to increasing the sustainability of the yam sector, thereby enhancing food security and reducing poverty.

No abstract

Yam (Dioscorea spp.) is a valuable food security crop in West Africa, where 92% of the world production occurs. The availability of quality seed tubers for increased productivity is a major challenge. In this study, minitubers weighing 1, 3, and 5 g produced from virus-free single-node vine cuttings of two improved yam varieties (Asiedu and Kpamyo) growing in an aeroponics system were assessed for suitability in seed production at a population of 100,000 plants ha−1. A 3 × 2 factorial experiment with randomized complete block design and three replications was set up during the cropping seasons of 2017 to 2019 at the International Institute of Tropical Agriculture Research Station in Kubwa, Abuja, Nigeria. Results showed field establishments of 87%–97.8%. Yields differed with minituber size, variety, and cropping season; the highest was 31.2 t ha−1 in 2019 and the lowest, 10 t ha−1 in 2018 from 5 and 1 g Kpamyo minitubers, respectively. The estimated number of tubers produced per hectare by 1, 3, and 5 g minitubers was 101,296, 112,592, and 130,555, with mean weights per stand of 159.2, 187.3, and 249.4 g, respectively. We recommend using less than 6 g minitubers for seed yam production due to their high multiplication rates.

Balogun M., Maroya N., Augusto J., Ajayi A., Kumar L., Aighewi B., Asiedu R. (2017): Relative efficiency of positive selection and tissue culture for generating pathogen-free planting materials of yam (Dioscorea spp.). Czech J. Genet. Plant Breed., 53: 9-16.Yams are staples in West Africa. They are propagated from tubers in an informal seed system. This encourages a build-up of diseases, and necessitates the rapid development of a formal seed system where certified seeds are functional. Although few reports exist on the use of meristem culture to generate pathogen-free yam, the success rate for the most economically important species in the sub-region, Dioscorea rotundata, for the most prevalent viruses is inadequate. To generate pathogen-free yam planting materials, the relative efficiency of tissue culture and positive selection was compared. Twenty-one asymptomatic yam plants were positively selected from 8187 stands of five landraces. Five of these stands were tested virus-negative by multiplex polymerase chain reaction (PCR) for Yam mosaic virus (YMV), Yam mild mosaic virus (YMMV) and Cucumber mosaic virus (CMV), and by PCR for the genus Badnavirus (BV), giving 0.08% success. Single nodes of the positively selected stands were used to establish in vitro plantlets, which were screened onto bacteriological indexing medium. The same was done for meristem-and node-derived plantlets of the improved variety TDr 95/19158. Incidence of endophytes ranged from 18 to 32% in the nodal plantlets while it was 0% in the meristem-derived plantlets. The effect of meristem culture combined with thermotherapy on the virus infection status was determined using virus-tested, one week old in vitro plantlets of eight improved genotypes. These in vitro plantlets were incubated at 36 ± 0.5°C and 16 h photoperiod for 21 days, after which meristems were excised, regenerated into plantlets and re-tested for viruses. Seventy-three percent of the samples were recovered from YMV but the effect on BV was inconsistent. Positive selection can be used as a palliative in generating quality declared seed but meristem culture combined with thermotherapy is more efficient for generating certified seed tubers of yam.