The influence of various graphene nano-platelets (GNPs) content on the tensile, flexural and Charpy impact characteristics of carbon, Kevlar and hybrid carbon/Kevlar fibers reinforced epoxy matrix composites was investigated. Both of composite configurations as carbon and Kevlar at outer and core skins were experimentally tested. The SEM images for flexural specimens were taken to observe the adhesion mechanism of GnPs particles with fiber/epoxy system. It is found that hybridization with Kevlar layers is contributed a positive effect on the hybrid carbon/Kevlar laminate structures in terms of tensile, flexural and impact behaviour. The incorporation of GnPs particles in hybrid and non-hybrid composite samples results in significant improvements in tensile, flexural and impact properties, and the greatest improvement occurs within the GnPs particle content of 0.1 and 0.25 wt%, indicating that the interfacial bonding between the matrix and the fibers is better due to the large surface area of the GnPs and the good entanglement between the GnPs layers and the matrix chains. The samples of impact test are experimented for edgewise and flatwise directions.
The present study investigates the effect of carbon fiber hybridization and graphene nanoplatelets inclusion on the vibration damping properties of glass fiber reinforced polymer composites. The hand layup method was utilized with hot press molding in hybrid/non-hybrid composite plate production. A total of sixteen laminates, eight containing pure glass/epoxy and pure carbon/epoxy, and the remainder containing glass/carbon, were stacked in four different arrays and impregnated with an epoxy matrix to provide a hybrid/non-hybrid configuration. In the first hybrid configuration, the glass fiber fabric is on the outer surface and the carbon fiber fabric is on the inside of the composite plate; in the second configuration, the opposite of this sequence was used. Graphene Nanoplatelets (GNPs) were added into the epoxy resin in different weight fractions (0, 0.1, 0.25, and 0.5 wt%). Experimental modal analysis was performed to evaluate the natural frequency and damping ratios of the GNPs modified/unmodified test samples. According to the results obtained, carbon fiber hybridization not only increased the natural frequency but also caused a decrease in the damping ratio of the glass fiber reinforced composite material. On the other hand, incorporating 0.5% by weight of GNPs into the epoxy matrix improved damping ratios by approximately 42.1, 51.6, 16.7 and 17.2% for the G05, GC05, CG05 and C05 samples, respectively, compared to the pure samples. Also, a decrease in natural frequency and loss storage values were observed at high GNPs content.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.