Magnesium-based materials are interesting alternatives for medical implants, as they have promising mechanical and biological properties. Thanks to them, it is possible to create biodegradable materials for medical application, which would reduce both costs and time of treatment. Magnesium as the sole material, however, it is not enough to support this function. It is important to determine proper alloying elements and methods. A viable method for creating such alloys is mechanical alloying, which can be used to design the structure and properties for proper roles. Mechanical alloying is highly influenced by the milling time of the alloy, as the time of the process affects many properties of the milled powders. X-ray diffraction (XRD) and scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS) were carried out to study the powder morphology and chemical composition of Mg65Zn30Ca4Gd1 powders. Moreover, the powder size was assessed by granulometric method and the Vickers hardness test was used for microhardness testing. The samples were milled for 6 min, 13, 20, 30, 40, and 70 h. The hardness correlated with the particle size of the samples. After 30 h of milling time, the average value of hardness was equal to 168 HV and it was lower after 13 (333 HV), 20 (273 HV), 40 (329 HV), and 70 (314 HV) h. The powder particles average size increased after 13 (31 μm) h of milling time, up to 30 (45–49 μm) hours, and then sharply decreased after 40 (28 μm) and 70 (12 μm) h.
Alloys based on magnesium are of considerable scientific interest as they have very attractive mechanical and biological properties that could be used to manufacture biodegradable materials for medical applications. Mechanical alloying is a very suitable process to obtain alloys that are normally hard to produce as it allows for solid-state diffusion via highly energetic milling, producing fine powders. Powders obtained by this method can be sintered into nearly net-shape products, moreover, their phase and chemical composition can be specifically tailored. This work aims to investigate the effect of milling time on the density, microstructure, phase composition, and mechanical properties of Mg-Zn-Ca-Pr powders processed by high energy mechanical alloying (HEMA) and consolidated by spark plasma sintering (SPS). Thus, the results of XRD phase analysis, particle size distribution (granulometry), density, mechanical properties, SEM investigation of mechanically alloyed and sintered Mg-Zn-Ca-Pr alloy are presented in this manuscript. The obtained results illustrate how mechanical alloying can be used to produce amorphous and crystalline materials, which can be sintered and demonstrates how the milling time impacts their microstructure, phase composition, and resulting mechanical properties.
Purpose: This paper explains mechanical synthesis which uses powders or material chunks in order to obtain phases and alloys. It is based on an example of magnesium powders with various additives, such as zinc, calcium and yttrium. Design/methodology/approach: The following experimental techniques were used: X-ray diffraction (XRD) method, scanning electron microscopy (SEM), determining particle size distributions with laser measuring, Vickers microhardness. Findings: The particle-size of a powder and microhardness value depend on the milling time. Research limitations/implications: Magnesium gained its largest application area by creating alloys in combination with other elements. Magnesium alloys used in various industry contain various elements e.g. rare-earth elements (REE). Magnesium alloys are generally made by casting processes. Consequently, the search for new methods of obtaining materials such as mechanical alloying (MA) offers new opportunities. The MA allows for the production of materials with completely new physico-chemical properties. Originality/value: Thanks to powder engineering it is possible to manufacture materials with specific chemical composition. These materials are characterized by very high purity, specified porosity, fine-grain structure, complicated designs. These are impossible to obtain with traditional methods. Moreover it is possible to refine the process even further minimalizing the need for finishing or machining, making the material losses very small or negligible. Furthermore material manufactured in such a way can be thermally or chemically processed without any problems.
The aim of this work is to present the influences of composition of the material and manufacturing technology conditions of the organic photovoltaics devices (OPv) with the organic and hybrid bulk heterojunction on the active layers properties and cells performance. The layers were produced by using small molecular compounds: the metal-phthalocyanine (MePc) and perylene derivatives (PTCDA) and the titanium dioxide (TiO2) nanoparticles. Two kinds of metal phthalocyanines (NiPc, TiOPc) were used as donor material and pperylenetetracarboxylic dianhydride (PTCDA) as an acceptor. The used manufacturing technique allowed to employ thin layers of materials in a fast deposition process. Bulk heterojunction was created by simultaneously applying the MePc:PTCDA materials during the evaporation of the components mixture.The research was based on the estimate of composition of bulk heterojunction, the examination of the surface morphology of the used layers and optical properties studies of the heterojunction and its implementation to photovoltaic architecture. The produced photovoltaic cells parameters were determined on the basis of current - voltage characteristics.The researches of structure of obtained layers were conducted by using scanning electron microscope (SEM) and transmission electron microscopy (TEM). The quantitative determination of surface topography by determining RMS and Ra coefficients were performed by atomic force microscopy (AFM). In order to determine the optical properties of the films the UV-Visible spectroscope have been utilized. Current - voltage characteristics were employed to determine the basic photovoltaic parameters using a dedicated device.The paper describes the influence of the individual components sharing the bulk heterojunction on its structure, optical properties and morphology of surface. In addition it allows for linking active layers properties with the parameters of the photovoltaic cells. The obtained results suggest the possibility of developing the utilized materials and technology in the further works on photovoltaic structures.
The magnesium-based alloys produced by mechanical alloying (MA) are characterized by specific porosity, fine-grained structure, and isotropic properties. In addition, alloys containing magnesium, zinc, calcium, and the noble element gold are biocompatible, so they can be used for biomedical implants. The paper assesses selected mechanical properties and the structure of the Mg63Zn30Ca4Au3 as a potential biodegradable biomaterial. The alloy was produced by mechanical synthesis with a milling time of 13 h, and sintered via spark-plasma sintering (SPS) carried out at a temperature of 350 °C and a compaction pressure of 50 MPa, with a holding time of 4 min and a heating rate of 50 °C∙min−1 to 300 °C and 25 °C∙min−1 from 300 to 350 °C. The article presents the results of the X-ray diffraction (XRD) method, density, scanning electron microscopy (SEM), particle size distributions, and Vickers microhardness and electrochemical properties via electrochemical impedance spectroscopy (EIS) and potentiodynamic immersion testing. The obtained results reveal the compressive strength of 216 MPa and Young’s modulus of 2530 MPa. The structure comprises MgZn2 and Mg3Au phases formed during the mechanical synthesis, and Mg7Zn3 that has been formed during the sintering process. Although MgZn2 and Mg7Zn3 improve the corrosion resistance of the Mg-based alloys, it has been revealed that the double layer formed because of contact with the Ringer’s solution is not an effective barrier; hence, more data and optimization are necessary.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.