Slippery liquid-infused porous surfaces (SLIPS) are porous nanostructures impregnated with a low surface tension lubricant. They have recently shown great promise in various applications that require non-wettable superhydrophobic surfaces. In this paper, we investigate experimentally the influence of the oil thickness on the wetting properties and drop impact dynamics of new SLIPS. By tuning the thickness of the oil layer deposited through spin-coating, we show that a sufficiently thick layer of oil is necessary to avoid dewetting spots on the porous nanostructure and thus increasing the homogeneity of the liquid distribution. Drop impact on these surfaces is investigated with a particular emphasis on the spreading and rebound dynamics when varying the oil thickness and the Weber number.

The optimization of functional optical devices requires the appropriate control of light propagation, which can be achieved by using engineered dielectric structures. Innovative materials combination and fabrication strategies are required to achieve a robust gain in performance without impacting manufacturing complexity and cost. In the present work, a novel liquid‐based approach is proposed for the simple and scalable fabrication of highly efficient and robust optical multilayer dielectric coatings. In particular, a sol–gel process is developed that enables the fabrication of large‐area distributed Bragg reflectors (DBR) integrating macroporous materials of controlled closed porosity. The DBRs have a very high index contrast, excellent and tunable optical properties, and high stability of performance and structural integrity with respect to crack formation and delamination, even against harsh ageing tests or solvent exposure. The potential of this approach to be integrated within existing optoelectronic architectures is demonstrated through the integration of a DBR structure as a back reflector in an amorphous silicon solar cell (a‐Si:H), resulting in a significant increase in light absorption, photocurrent, and overall efficiency. This opens the way towards simple dielectric engineering of robust photoactive devices based on the versatile use of liquid routes for the deposition of structured dielectric coatings.