This paper describes recent advances in the effect of soil creep on the time-dependent deformation of deep braced excavation. The effect of soil creep is generally investigated using the observational method and the plain-strain numerical simulation method. The observational method is more applicable for deep braced excavations in soft clays constructed using the top-down method. The plain-strain numerical simulation method can be conveniently used for parametric analysis, but it is unable to capture the spatial characteristics of soil creep effect on lateral wall deflections and ground movements. The additional lateral wall deflections and ground movements that are generated due to the soil creep effect can account for as large as 30% of the total displacements, which highlights the importance of considering the effect of soil creep in deep braced excavations through soft clays. The magnitude of the displacements due to soil creep depends on various factors, such as excavation depth, elapsed period, unsupported length, and strut stiffness. Parametric analyses have indicated several effective measures that can be taken in practice to mitigate the detrimental effect of soil creep on the deformation of deep braced excavation. Based on the literature review, potential directions of the related future research work are discussed. This paper should be beneficial for both researchers and engineers focusing on mitigating the adverse effect of soil creep on the stability of deep braced excavations.
Sand elements in the natural or manmade field have often undergone initial static shear stresses before suffering cyclic loading. To explore the effect of static shear stress, a series of undrained cyclic triaxial tests were performed on dense and loose calcareous sand under different initial and cyclic shear stresses. The triaxial test results are used to describe the effect of static shear stress on the cyclic response of the calcareous sand with different relative density. Cyclic mobility, flow deformation, and residual deformation accumulation are the three main failure modes under varying static and cyclic shear stress levels. The cyclic resistance of dense sand is greater than that of loose sand, but the initial static stress has different effects on the cyclic resistance of the two kinds of sand. The dense sand owns a higher cyclic resistance with SSR increasing, while for the loose sand, 0.12 is the critical SSR corresponding to the lowest value of the cyclic resistance. The dense sand has more fast accumulation of dissipated energy, compared with loose sand. Additionally, an exponential relationship is established between static shear stress, relative density, and normalized energy density.
Relative density is an important index affecting the mechanical behaviors of calcareous sands. The dense sands present softening strength, whereas the loose sands exhibit hardening strength. Furthermore, the relative density is determined based on the maximum and minimum void ratios obtained by using the maximum and minimum dry density test. In this study, a series of tests were carried out on various mixed graded sands to explore their material properties and the relationship between the limit void ratio, considering the effects of test methods, equipment, and fine content. It is shown that a more accurate maximum void ratio can be attained by using the 1000 mL measuring cylinder with low rotation speed. In addition, in order to avoid particle breakage of calcareous sands, it is suggested that the minimum void ratio should be obtained with the 1000 mL compaction cylinder combining vibration with hit. The results also show that a linear relationship exists among the limit void ratio of various mixed graded sands. Besides, the void ratio is significantly affected by the fine content. 40% is the critical fine content corresponding to the lowest value of the limit void ratio.
The use of geosynthetic-encased stone columns has been proven to be an economical and effective method for soft soil foundation treatment. This method is widely used in civil engineering projects at home and abroad. When the geosynthetic-encased stone columns are applied to deep soft clays, they are in a floating state. The load-bearing deformation mechanism of geosynthetic-encased stone columns has changed. The interaction between the aggregates, geogrid, and soil is worth studying, especially at the bottom of the column. In this paper, the discrete element method is used to simulate a floating geosynthetic-encased stone column with a 280 mm encasement depth in deep soft clays. The load-bearing deformation characteristics and mesoscopic mechanism of the floating geosynthetic-encased stone column are studied. The results show that there are large vertical and radial stresses in the top region. Moreover, the porosity and sliding fraction of aggregates in this region increase with settlement, and the coordination number decreases with settlement. The vertical and radial stresses of the soil near the column body are not affected much by the column body. When the encasement depth exceeds 280 mm, the bearing capacity of the FGESC does not increase much. The encasement depth controls the failure mode of the floating geosynthetic-encased stone column. As the encasement depth increases, the failure mode of the floating geosynthetic-encased stone column gradually transitions from swelling deformation to penetration failure.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.