Polymer blending has been a simple and efficient way for designing and controlling the performance of polymeric materials using easily available types. Both polycarbonate and polyamide have excellent mechanical properties and thermal stability but their disadvantages such as limited chemical or water resistance can be eliminate by tailoring them. Main difficulties in processing of PC/PA blends are the poor compatibility and high moisture adsorption capacity of the two raw materials complicating processing and also deteriorating mechanical properties of the products. Compatibilizing additives such as olefin-maleic-anhydride copolymer based compounds used in the experimental work can help to overcome the abovementioned difficulties. To determine the processing conditions of the raw materials several drying temperatures have been tested and thermal degradation has been examined by FT-IR spectroscopy. Experimental compatibilizing additives based on an olefin-maleic-anhydride copolymer have been investigated to enhance mechanical properties of the blends prepared by extrusion moulding. Mechanical, rheological, SEM and FT-IR measurements have been performed and at least one additive has been found to be efficient in improving selected properties.
Waste high-density polyethylene (w-HDPE)/ acrylonitrile-butadiene-styrene (ABS)/ground tire rubber (GTR) have been melt blended by two-roll milling. Ternary blends of w-HDPE/ABS/GTR have been observed to be incompatible in the composition range studied which revealed in the deteriorated mechanical properties. Two main types of compatibilizers such as an olefin-maleic anhydride copolymer based one synthesized by the authors and a commercial maleic anhydride grafted polypropylene (MA-g-PP) have been chosen for enhancing compatibility between the components ergo the mechanical properties. For characterizing tensile and impact properties of the blends mechanical tests have been carried out besides the scanning electron microscopy (SEM), X-ray diffraction and Fourier transform infrared spectroscopy. The most advantageous result in industrial practice can be that the experimental additive allows to apply higher GTR concentration ergo gives the opportunity to recycle higher level of GTR.
Waste high-density polyethylene (w-HDPE)/ acrylonitrile–butadiene–styrene (ABS)/ground tire rubber (GTR) have been melt blended by two-roll milling. Ternary blends of w-HDPE/ABS/GTR have been observed to be incompatible in the composition range studied which revealed in the deteriorated mechanical properties. Two main types of compatibilizers such as an experimental olefin-maleic anhydride copolymer based one synthesized by the authors and a commercial maleic anhydride grafted polypropylene (MA-g-PP) have been chosen for enhancing compatibility between the components ergo the mechanical properties. For characterizing tensile and impact properties of the blends mechanical tests have been carried out besides the scanning electron microscopy (SEM), X-ray diffraction and Fourier transform infrared spectroscopy. The most advantageous result in industrial practice can be that the experimental additive allows to apply higher GTR concentration ergo gives the opportunity to recycle higher level of GTR.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.