Nowadays, there is a high demand for sensitive and selective real-time analytical methods suitable for a wide range of applications, from personalized telemedicine, drug discovery, food safety, and quality control, to defense, security, as well as environmental monitoring. Biosensors are analytical devices able to detect bio-chemical analytes (e.g., neurotransmitters, cancer biomarkers, bio-molecules, and ions), through the combination of a bio-recognition element and a bio-transduction device. The use of customized bio-recognition elements such as enzymes, antibodies, aptamers, and ion-selective membranes facilitates achieving high selectivity. Among the different bio-transduction devices currently available, electrolyte-gated field-effect transistors, in which the dielectric is represented by an ionic liquid buffer solution containing the targeted analyte, are gaining increasing attention. Indeed, these biotransduction devices are characterized by superior electronic properties and intrinsic signal amplification that allow the detection of a wide rangeofbiomolecules with high sensitivity (down to pM concentration). A promising semiconducting material for bio-transduction devices is represented by carbon nanotubes, due to their unique electrical properties, nanosize, bio-compatibility, and their simple low-cost processability. This work provides acomprehensive and critical review of electrolyte-gated carbon nanotube field-effect transistor-based biosensors. First, an introduction to these bio-sensing devices is given. Next, the device configurations and operating principles are presented, and the most used materials and processes are reviewed with a particular focus on carbon nanotubes as the active material. Subsequently, different functionalization strategies reported in the literature, based on enzymes, antibodies, aptamers, and ion-selective membranes, are analyzed critically. Finally, present issues and challenges faced in the area are investigated,theconclusions are drawn, and a perspective outlook over the field of bio-sensing technologies, in general, is provided.
Heterocyclic amine histamine is a well-known foodborne toxicant (mostly linked to “scombroid poisoning”) synthesized from the microbial decarboxylation of amino acid histidine. In this work, we report the fabrication of a flexible screen-printed immunosensor based on a silver electrode coated with single-walled carbon nanotubes (SWCNTs) for the detection of histamine directly in fish samples. Biosensors were realized by first spray depositing SWCNTs on the working electrodes and by subsequently treating them with oxygen plasma to reduce the unwanted effects related to their hydrophobicity. Next, anti-histamine antibodies were directly immobilized on the treated SWCNTs. Histamine was detected using the typical reaction of histamine and histamine-labeled with horseradish peroxidase (HRP) competing to bind with anti-histamine antibodies. The developed immunosensor shows a wide linear detection range from 0.005 to 50 ng/mL for histamine samples, with a coefficient of determination as high as 98.05%. Average recoveries in fish samples were observed from 96.00% to 104.7%. The biosensor also shows good selectivity (less than 3% relative response for cadaverine, putrescine, and tyramine), reproducibility, mechanical and time stability, being a promising analytical tool for the analysis of histamine, as well as of other food hazards.
The quest for short channel length transistors is an important challenge in semiconductor industry. A similar trend is observed in the field of flexible electronics where sensor conditioning circuits and transceivers have to be realized on plastic foils. Here the use of a focused Ga + ion beam (FIB) to structure the channel of a flexible InGaZnO based thin-film transistor (TFT) is presented. The resulting flexible TFT exhibits a channel length of 160 nm and an effective field effect mobility of 4 cm 2 V =1 s =1 . Furthermore, the optimized Ga + beam milling does not damage the underneath Al 2 O 3 gate insulator leading to a gate leakage current of <200 pA. The extreme channel length demonstrates that focused ion beams can complement conventional fabrication approaches, overcoming current limitations imposed by flexible substrates. While the dimensions result in short channel effects and a drain conductance of 25 µS limiting the DC applicability of the FIB TFT, the device also exhibits a high internal gain of 3.4 dB. Consequently, a transit frequency of ≈6 MHz and a maximum frequency of oscillation of ≈19 MHz is measured for supply voltages ≤0.5 V. This shows that highly scaled flexible TFTs for analog circuits can be fabricated by ion beam milling.
Nitrate (NO 3 – ) contamination is becoming a major concern due to the negative effects of an excessive NO 3 – presence in water which can have detrimental effects on human health. Sensitive, real-time, low-cost, and portable measurement systems able to detect extremely low concentrations of NO 3 – in water are thus becoming extremely important. In this work, we present a novel method to realize a low-cost and easy to fabricate amperometric sensor capable of detecting small concentrations of NO 3 – in real water samples. The novel fabrication technique combines printing of a silver (Ag) working electrode with subsequent modification of the electrode with electrodeposited copper (Cu) nanoclusters. The process was tuned in order to reach optimized sensor response, with a high catalytic activity toward electroreduction of NO 3 – (sensitivity: 19.578 μA/mM), as well as a low limit of detection (LOD: 0.207 nM or 0.012 μg/L) and a good dynamic linear concentration range (0.05 to 5 mM or 31 to 310 mg/L). The sensors were tested against possible interference analytes (NO 2 – , Cl – , SO 4 2– , HCO 3 – , CH 3 COO – , Fe 2+ , Fe 3+ , Mn 2+ , Na + , and Cu 2+ ) yielding only negligible effects [maximum standard deviation (SD) was 3.9 μA]. The proposed sensors were also used to detect NO 3 – in real samples, including tap and river water, through the standard addition method, and the results were compared with the outcomes of high-performance liquid chromatography (HPLC). Temperature stability (maximum SD 3.09 μA), stability over time (maximum SD 3.69 μA), reproducibility (maximum SD 3.20 μA), and repeatability (maximum two-time useable) of this sensor were also investigated.
Furaneol is a widely used flavoring agent, which can be naturally found in different products, such as strawberries or thermally processed foods. This is why it is extremely important to detect furaneol in the food industry using ultra-sensitive, stable, and selective sensors. In this context, electrochemical biosensors are particularly attractive as they provide a cheap and reliable alternative measurement device. Carbon nanotubes (CNTs) and silver nanoparticles (AgNPs) have been extensively investigated as suitable materials to effectively increase the sensitivity of the biosensors. However, a comparison of the performance of biosensors employing CNTs and AgNPs is still missing. Herein, the effect of CNTs and AgNPs on the biosensor performance has been thoughtfully analyzed. Therefore, disposable flexible and screen printed electrochemical aptasensor modified with CNTs (CNT-ME), or AgNPs (AgNP-ME) have been developed. Under optimized conditions, CNT-MEs showed better performance compared to AgNP-ME, yielding a linear range of detection over a dynamic concentration range of 1 fM–35 μM and 2 pM–200 nM, respectively, as well as high selectivity towards furaneol. Finally, our aptasensor was tested in a real sample (strawberry) and validated with high-performance liquid chromatography (HPLC), showing that it could find an application in the food industry.
Tetracycline (TC) is a widely known antibiotic used worldwide to ‘’treat animals. Its residues in animal-origin foods cause adverse health effects to consumers. Low-cost and real-time measuring systems of TC in food samples are, therefore, extremely needed. In this work, a three-electrode sensitive and label-free sensor was developed to detect TC residues from milk and meat extract samples, using CO2 laser-induced graphene (LIG) electrodes modified with gold nanoparticles (AuNPs) and a molecularly imprinted polymer (MIP) used as a synthetic biorecognition element. LIG was patterned on a polyimide (PI) substrate, reaching a minimum sheet resistance (Rsh) of 17.27 ± 1.04 Ω/sq. The o-phenylenediamine (oPD) monomer and TC template were electropolymerized on the surface of the LIG working electrode to form the MIP. Surface morphology and electrochemical techniques were used to characterize the formation of LIG and to confirm each modification step. The sensitivity of the sensor was evaluated by differential pulse voltammetry (DPV), leading to a limit of detection (LOD) of 0.32 nM, 0.85 nM, and 0.80 nM in buffer, milk, and meat extract samples, respectively, with a working range of 5 nM to 500 nM and a linear response range between 10 nM to 300 nM. The sensor showed good LOD (0.32 nM), reproducibility, and stability, and it can be used as an alternative system to detect TC from animal-origin food products.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.