The shedding of pathogens by infected humans enables the use of sewage monitoring to conduct wastewater-based epidemiology (WBE). Although most WBE studies use data from large sewage treatment plants, timely data from smaller catchments are needed for targeted public health action. Traditional sampling methods, like autosamplers or grab sampling, are not conducive to quick ad hoc deployments and high-resolution monitoring at these smaller scales. This study develops and validates a cheap and easily deployable passive sampler unit, made from readily available consumables, with relevance to the COVID-19 pandemic but with broader use for WBE. We provide the first evidence that passive samplers can be used to detect SARS-CoV-2 in wastewater from populations with low prevalence of active COVID-19 infections (0.034 to 0.34 per 10,000), demonstrating their ability for early detection of infections at three different scales (lot, suburb, and city). A side by side evaluation of passive samplers ( n = 245) and traditionally collected wastewater samples ( n = 183) verified that the passive samplers were sensitive at detecting SARS-CoV-2 in wastewater. On all 33 days where we directly compared traditional and passive sampling techniques, at least one passive sampler was positive when the average SARS-CoV-2 concentration in the wastewater equaled or exceeded the quantification limit of 1.8 gene copies per mL ( n = 7). Moreover, on 13 occasions where wastewater SARS-CoV-2 concentrations were less than 1.8 gene copies per mL, one or more passive samplers were positive. Finally, there was a statistically significant ( p < 0.001) positive relationship between the concentrations of SARS-CoV-2 in wastewater and the levels found on the passive samplers, indicating that with further evaluation, these devices could yield semi-quantitative results in the future. Passive samplers have the potential for wide use in WBE with attractive feasibility attributes of cost, ease of deployment at small-scale locations, and continuous sampling of the wastewater. Further research will focus on the optimization of laboratory methods including elution and extraction and continued parallel deployment and evaluations in a variety of settings to inform optimal use in wastewater surveillance.

No abstract

High-resolution data collection of the urban stormwater network is crucial for future asset management and illicit discharge detection, but often too expensive as sensors and ongoing frequent maintenance works are not affordable. We developed an integrated water depth, electrical conductivity (EC), and temperature sensor that is inexpensive (USD 25), low power, and easily implemented in urban drainage networks. Our low-cost sensor reliably measures the rate-of-change of water level without any re-calibration by comparing with industry-standard instruments such as HACH and HORIBA’s probes. To overcome the observed drift of level sensors, we developed an automated re-calibration approach, which significantly improved its accuracy. For applications like monitoring stormwater drains, such an approach will make higher-resolution sensing feasible from the budget control considerations, since the regular sensor re-calibration will no longer be required. For other applications like monitoring wetlands or wastewater networks, a manual re-calibration every two weeks is required to limit the sensor’s inaccuracies to ±10 mm. Apart from only being used as a calibrator for the level sensor, the conductivity sensor in this study adequately monitored EC between 0 and 10 mS/cm with a 17% relative uncertainty, which is sufficient for stormwater monitoring, especially for real-time detection of poor stormwater quality inputs. Overall, our proposed sensor can be rapidly and densely deployed in the urban drainage network for revolutionised high-density monitoring that cannot be achieved before with high-end loggers and sensors.

No abstract

Current commercial sensors to monitor water flow velocities are expensive, bulky, and require significant effort to install. Low-cost sensors open the possibility of monitoring storm and waste water systems at a much greater spatial and temporal resolution without prohibitive costs and resource investment. To aid in this, this work developed a low-cost, low-power velocity sensor based on acoustic Doppler velocimetry. The sensor, costing less than 50 USD is open-source, open-hardware, compact, and easily interfaceable to a wide range of data-logging systems. A freely available sensor design at this price point does not currently exist, and its novelty is in enabling high-resolution real-time monitoring schemes. The design is capable of measuring water velocities up to 1200 mm/s. The sensor is characterised and then verified in an in-field long-term test. Finally, the data from this test are then used to evaluate the performance of the sensor in a real-world scenario. The analysis concludes that the sensor is capable of effectively measuring water velocity.

Planning for future urban development and water infrastructure is uncertain due to changing human activities and climate. To quantify these changes, we need adaptable and fast models that can reliably explore scenarios without requiring extensive data and inputs. While such models have been recently considered for urban development, they are lacking for stormwater pollution assessment. This work proposes a novel Future Urban Stormwater Simulation (FUSS) model, utilizing previously developed urban planning algorithm (UrbanBEATS) to dynamically assess pollution changes in urban catchments. By using minimal input data and adding stochastic point-source pollution to the build-up/wash-off approach, this study highlights calibration and sensitivity analysis of flow and pollution modules, across the range of common stormwater pollutants. The results highlight excellent fit to measured values in a continuous rainfall simulation for the flow model, with one significant calibration parameter. The pollution model was more variable, with TSS, TP and Pb showing high model efficiency, while TN was predicted well only across event-based assessment. The work further explores the framework for the model application in future pollution assessment, and points to the future work aiming to developing land-use dependent model parameter sets, to achieve flexibility for model application across varied urban catchments.

No abstract

Illicit discharges in urban stormwater drains are a major environmental concern that deteriorate downstream waterway health. Conventional detection methods such as stormwater drain visual inspection and dye testing all have their fundamental drawbacks and limitations which might not easily locate and eliminate illegal discharges in a catchment. We deployed 22 novel low-cost level, temperature and conductivity sensors across an urban catchment in Melbourne for a year to monitor the distributed drainage network, thereby detecting likely illicit discharges ranging from a transitory flow with less than 10 minutes to persistent flows lasting longer than 20 hours. We discuss rapid deployment methods, real-time data collection and online processing. The ensemble analysis of all dry weather flow data across all sites indicates that: (i) large uncertainties are associated with discharge frequency, duration, and variation in water quality within industrial and residential land uses; (ii) most dry weather discharges are intermittent and transient flows which are hard to be detected and not simply due to cross-connections with the sewerage network; (iii) detectable diurnal discharge patterns can support mitigation efforts, including policies and regulatory measures (e.g., enforcement or education) to protect receiving waterways; and, (iv) that it is possible to cost effectively isolate sources of dry weather pollution using a distributed sensor network.