Removal of sulfur species from fuels is an increasingly critical environmental issue. Hydrodesulfurization (HDS) removes sulfur compounds, such as mercaptans and sulfides, from hydrocarbons; however, some sulfur-containing compounds are very difficult to remove and need deep desulfurization processes. In this study, another approach is explored, where dibenzothiophene can be removed from the HDS products by a liquid-phase process. Four different sulfur removal approaches are tested: oxidation, extraction, consecutive oxidation and extraction, and simultaneous oxidation and extraction. A detailed parametric experimental study was performed to select the best technique for the specified purpose of this investigation. n-Octane doped with dibenzothiophenes is used as a model fuel, which is extracted by polar solvents [N-methyl-2-pyrolidone (NMP), dimethyl formamide (DMF), and acetonitrile (ACN)]. These solvents are found to have a moderate capability of removing sulfur species. Applying oxidation in the liquid phase resulted in partial removal of the sulfur content, but most of the sulfur components are not removed from the fuel phase. However, applying both oxidation and extraction steps (either consecutively or simultaneously) resulted in dissolution of sulfur production in the solvent phase. NMP was found to be the best solvent (among the tested ones in this investigation) for the removal of oxidized sulfur species. This is related to the high capability of NMP (polar solvent) for the removal of oxidized (polar) sulfur species (sulfones).
Polybutylene/starch/nanoclay composite blends were prepared by melt extrusion technique. Maleic anhydride grafted polybutylene was used as a compatibilizer. The nanocomposites were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, atomic force microscopy, rheological, and mechanical analysis. Addition of compatibilizer to the polybutylene/starch/nanoclay showed dispersion and nucleation related to the nanoclay in the polybutylene matrix. An increase in the mechanical properties like modulus and tensile strength at break and a decrease in the elongation at break were observed on the addition of compatibilizer to the matrix compared to that of uncompatibilized matrix. The biodegradability of the nanocomposites was studied using the landfill burial test. The blends subjected to the burial test were evaluated for their tensile properties. The results revealed that the tensile strength and elongation at break of the compatibilized nanocomposites decreased after 80 days of land burial test compared to the initial period.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.