No abstract

The chemical and instrumental analysis of alkali-treated Borassus fibers is carried out to explore the possibility of their use as reinforcement in green composites. The chemical analysis shows presence of a-cellulose, hemicellulose, and lignin. This is further confirmed by FTIR and high-resolution solid-state 13 C NMR spectroscopy. The influence of alkali treatment on morphology and mechanical properties is attempted by SEM and UTM techniques, respectively. The wide-angle X-ray dif-fraction analysis of the native and treated fibers shows that alkali treatment influences the crystallinity of the fibers. The efficacy of the Borassus fibers (native and treated) as a component of green composites is discussed.

No abstract

Polycarbonate (PC)/modified clay nanocomposites were prepared, in the absence and presence of different amounts of maleic anhydride grafted polypropylene (PP-g-MA), by direct melt blending. Their structures, as well as mechanical, morphological and thermal properties, were characterized by X-ray diffractometry (XRD), tensile testing, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The XRD results of the PC/clay nanocomposites showed that they had intercalated structures, although some exfoliation was visible at low clay contents, that the gallery heights of the PC/clay nanocomposites were almost the same, and that some of the clay layers collapsed as a result of modifier decomposition at the high processing temperature. The XRD patterns of the PC/PP-g-MA/clay nanocomposites clearly show less intercalation and more exfoliation with increasing PP-g-MA content. These results were supported by TEM observations. Both the tensile strength and modulus show substantial improvements with both increasing clay and PP-g-MA contents, while the elongation at break substantially decreases, although the presence of PP-g-MA somewhat improves these values. All the nanocomposites have lower thermal stability than pure PC, but the presence of PP-g-MA seems to improve the thermal stability of these samples.

ABSTRACT:A uniaxial natural fabric of Hildegardia populifolia was treated with 5% sodium hydroxide solution for 1 h, and the resulting changes were analyzed by polarized and scanning electron microscopic techniques. The untreated and treated H. populifolia fabric was reinforced in epoxy and toughened with 10% polycarbonate. The variation of the flexural strength and flexural modulus with different fabric contents and fiber orienrations was studied. The effect of sodium hydroxide and a silane coupling agent on the flexural properties of the composite was also studied.It was observed that the flexural properties increased on alkali treatment and when the coupling agent was used. The morphology of the cryogenically fractured surfaces indicated good bonding between the matrix and the reinforcement when a coupling agent was used.