Natural convection within trapezoidal enclosures finds significant practical applications. The natural convection flows play a prominent role in the transport of energy in energyrelated applications, in case of proper design of enclosures to achieve higher heat transfer rates. In the present study, a two-dimensional cavity with adiabatic right side wall is studied. The left side vertical wall is maintained at the constant hot temperature and the top slat wall is maintained at cold temperature. The dimensionless governing partial differential equations for vorticity-stream function are solved using the finite difference method with incremental time steps. The parametric study involves a wide range of Rayleigh number, Ra, 103 ≤ Ra ≤ 105 and Prandtl number (Pr = 0.025, 0.71 and 10). The fluid flow within the enclosure is formed with different shapes for different Pr values. The flow rate is increased by enhancing the Rayleigh number (Ra = 104 ). The numerical results are validated with previous results. The governing parameters in the present article, namely Rayleigh number and Prandtl number on flow patterns, isotherms as well as local Nusselt number are reported.

Modern magnetic nanomaterial processing operations are progressing rapidly and require increasingly sophisticated mathematical models for their optimization. Stimulated by such developments, in this paper, a theoretical and computational study of a steady magnetohydrodynamic nanofluid over an exponentially stretching/shrinking permeable sheet with melting (phase change) and radiative heat transfer is presented. Besides, wall transpiration, that is, suction and blowing (injection), is included. This study deploys Buongiorno's nanofluid model, which simulates the effects of the Brownian motion and thermophoresis. The transport equations and boundary conditions are normalized via similarity transformations and appropriate variables, and the similarity solutions are shown to depend on the transpiration parameter. The emerging dimensionless nonlinear coupled ordinary differential boundary value problem is solved numerically with the Newton-Fehlberg iteration technique. Validation with special cases from the literature is included.

Hi d ay a t h ull a Kh a n, BM d, Venk a t a d ri, K, B e g, OA, R a m a c h a n d r a P r a s a d, V a n d M allik a rj u n a, B h t t p:// dx.

In this article, we study the nonlinear steady thermal convection of an incompressible third-grade non-Newtonian fluid from a horizontal circular cylinder. The transformed conservation equations are solved numerically subject to physically appropriate boundary conditions using a second-order accurate implicit finite-differences Keller Box technique. The influence of a number of emerging non-dimensional parameters, namely the third-grade fluid parameter (ϕ), the material fluid parameters (ϵ1, ϵ2), Prandtl number (Pr), Biot number (y), thermal radiation (F) and dimensionless tangential coordinate (ξ) on velocity and temperature evolution in the boundary layer regime are examined in detail. Furthermore, the effects of these parameters on surface heat transfer rate and local skin friction are also investigated. Validation with earlier Newtonian studies is presented and excellent correlation is achieved. It is found that the velocity, skin friction and Nusselt number (heat transfer rate) reduce with increasing third grade fluid parameter (ϕ), whereas the temperature is enhanced. Increasing material fluid parameter (ϵ1) reduces the velocity and heat transfer rate but enhances the temperature and skin friction. The study is relevant to chemical materials processing applications and low density polymer materials processing.

The nonlinear, steady, and mixed convective boundary layer flow and heat transfer of an incompressible tangent hyperbolic non‐Newtonian fluid over an isothermal wedge in the presence of magnetic field are analyzed numerically using the implicit Keller‐Box finite‐difference technique. The entropy analysis due to MHD flow of a tangent hyperbolic fluid past an isothermal wedge and viscous dissipation is also included. The numerical code is validated with previous Newtonian studies available in the literature. Graphical and tabulated results are analyzed to study the behavior of the fluid velocity, temperature, concentration, shear stress, heat transfer rate, entropy generation number, and Bejan number for various emerging thermophysical parameters, namely Weissenberg number (We), power‐law index (n), mixed convection parameter (λ), pressure gradient parameter (m), Prandtl number (Pr), Biot number (γ), Hartmann number (Ha), Brinkmann number (Br), Reynolds number (Re), and temperature gradient (Π). It is observed that velocity, entropy, Bejan number, and surface heat transfer rate are reduced with the increase in the Weissenberg number, but temperature and local skin friction are increased. An increase in pressure gradient enhances velocity, entropy, local skin friction, and surface heat transfer rate, but reduces temperature and Bejan number. An increase in an isothermal power‐law index (n) is observed to increase velocity, Bejan number, and surface heat transfer rate, but it decreases temperature, entropy, and local skin friction. An increase in the magnetic parameter (Ha) is found to decrease temperature, entropy, surface heat transfer rate, and local skin friction, and it increases velocity and Bejan number. The research is applicable for coating materials in chemical engineering, for instance, robust paints, production of aerosol deposition, and water‐soluble solution thermal treatment.