Materials often exhibit a trade-off between stiffness and extensibility; for example, strengthening elastomers by increasing their cross-link density leads to embrittlement and decreased toughness. Inspired by cuticles of marine mussel byssi, we circumvent this inherent trade-off by incorporating sacrificial, reversible iron-catechol cross-links into a dry, loosely cross-linked epoxy network. The iron-containing network exhibits two to three orders of magnitude increases in stiffness, tensile strength, and tensile toughness compared to its iron-free precursor while gaining recoverable hysteretic energy dissipation and maintaining its original extensibility. Compared to previous realizations of this chemistry in hydrogels, the dry nature of the network enables larger property enhancement owing to the cooperative effects of both the increased cross-link density given by the reversible iron-catecholate complexes and the chain-restricting ionomeric nanodomains that they form.

Polyelectrolyte complexation is critical to the formation and properties of many biological and polymeric materials, and is typically initiated by aqueous mixing1 followed by fluid–fluid phase separation, such as coacervation2–5. Yet little to nothing is known about how coacervates evolve into intricate solid microarchitectures. Inspired by the chemical features of the cement proteins of the sandcastle worm, here we report a versatile and strong wet-contact microporous adhesive resulting from polyelectrolyte complexation triggered by solvent exchange. After premixing a catechol-functionalized weak polyanion with a polycation in dimethyl sulphoxide (DMSO), the solution was applied underwater to various substrates whereupon electrostatic complexation, phase inversion, and rapid setting were simultaneously actuated by water–DMSO solvent exchange. Spatial and temporal coordination of complexation, inversion and setting fostered rapid (~25 s) and robust underwater contact adhesion (Wad ≥ 2 J m−2) of complexed catecholic polyelectrolytes to all tested surfaces including plastics, glasses, metals and biological materials.

Polymeric materials that intrinsically heal at damage sites under wet or moist conditions are urgently needed for biomedical and environmental applications [1][2][3][4][5][6] . Although hydrogels with self-mending properties have been engineered by means of mussel-inspired metal-chelating catechol-functionalized polymer networks 7-10 , biological self-healing in wet conditions, as occurs in self-assembled holdfast proteins in mussels and other marine organisms 11,12 , is generally thought to involve more than reversible metal chelates. Here we demonstrate self-mending in metal-free water of synthetic polyacrylate and polymethacrylate materials that are surface-functionalized with mussel-inspired catechols. Wet self-mending of scission in these polymers is initiated and accelerated by hydrogen bonding between interfacial catechol moieties, and consolidated by the recruitment of other non-covalent interactions contributed by subsurface moieties. The repaired and pristine samples show similar mechanical properties, suggesting that the triggering of complete self-healing is enabled underwater by the formation of extensive catechol-mediated interfacial hydrogen bonds.All polymeric materials suffer damage in the course of their functional lifetimes. Few, if any, completely heal at damage sites. Despite recent progress in the design of self-mending polymeric materials based on crack-activated crosslinking 1 , light 2 , heat 3 or other external stimuli 4 , these remain less than perfectly healed, and, in the case of polymers in wet environments, self-healing technologies are even more limited than those engineered for dry conditions. Mussel adhesive holdfasts exhibit significant self-healing capabilities 11,12 , although the molecular mechanisms involved are poorly understood. Notwithstanding this, the selfmending adhesion and cohesion of isolated dopa (3,4-dihydroxyphenyl-L-alanine)-containing adhesive proteins were shown to rely critically on maintaining dopa in an acidic and reducing environment 13,14 . Significantly different conditions are required to recapitulate the self-healing cohesion of tris-dopa-Fe 3+ -mediated complexes in proteins and polymers [7][8][9]15 . Such results increasingly suggest the importance of dopa, but also its subtle and diverse interfacial reactivity vis-à-vis the traditional and still widely held view that dopa, and catechols generally, function primarily as crosslinkers after their 2-electron oxidation to quinones 16 . To better assess the contribution of catechol to polymer selfhealing in a reducing (pH 3), metal-free wet environment, we prepared a material from common, water-insoluble synthetic acrylic polymers having a catechol-functionalized surface. These materials are completely self-healing in a process initiated by catecholmediated interfacial hydrogen bonding, and consolidated by followup interactions (for example, hydrophobic and steric) after a brief compression (∼6 × 10 4 Pa). The crucial and robust roles played by

Nature employs sophisticated control of a structure's properties at multiple length scales to achieve its wet adhesion. However, the translation of such structures has very often been missing in biomimetic adhesives; in turn, their performance is significantly limited as compared to that of biological adhesion, e.g., from mussels. In this Perspective, we overview the major breakthroughs in this field, highlighting the recent advances that demonstrate that holistic multiscale translation is essential to biomimetic design. We argue that the multiscale coordination of numerous key elements in the natural adhesive system is essential to replicate the strong, instant, and durable wet adhesion of the marine sessile organism.

Despite the recent progress in and demand for wet adhesives, practical underwater adhesion remains limited or non-existent for diverse applications. Translation of mussel-inspired wet adhesion typically entails catechol functionalization of polymers and/or polyelectrolytes, and solution processing of many complex components and steps that require optimization and stabilization. Here we reduced the complexity of a wet adhesive primer to synthetic low-molecular-weight catecholic zwitterionic surfactants that show very strong adhesion (∼50 mJ m−2) and retain the ability to coacervate. This catecholic zwitterion adheres to diverse surfaces and self-assembles into a molecularly smooth, thin (<4 nm) and strong glue layer. The catecholic zwitterion holds particular promise as an adhesive for nanofabrication. This study significantly simplifies bio-inspired themes for wet adhesion by combining catechol with hydrophobic and electrostatic functional groups in a small molecule.

Numerous attempts have been made to translate mussel adhesion to diverse synthetic platforms. However, the translation remains largely limited to the Dopa (3,4-dihydroxyphenylalanine) or catechol functionality, which continues to raise concerns about Dopa's inherent susceptibility to oxidation. Mussels have evolved adaptations to stabilize Dopa against oxidation. For example, in mussel foot protein 3 slow (mfp-3s, one of two electrophoretically distinct interfacial adhesive proteins in mussel plaques), the high proportion of hydrophobic amino acid residues in the flanking sequence around Dopa increases Dopa's oxidation potential. In this study, copolyampholytes, which combine the catechol functionality with amphiphilic and ionic features of mfp-3s, were synthesized and formulated as coacervates for adhesive deposition on surfaces. The ratio of hydrophilic/hydrophobic as well as cationic/anionic units was varied in order to enhance coacervate formation and wet adhesion properties. Aqueous solutions of two of the four mfp-3s-inspired copolymers showed coacervate-like spherical microdroplets (ϕ ≈ 1−5 μm at pH ∼4 (salt concentration ∼15 mM). The mfp-3s-mimetic copolymer was stable to oxidation, formed coacervates that spread evenly over mica, and strongly bonded to mica surfaces (pull-off strength: ∼17.0 mJ/m 2 ). Increasing pH to 7 after coacervate deposition at pH 4 doubled the bonding strength to ∼32.9 mJ/m 2 without oxidative cross-linking and is about 9 times higher than native mfp-3s cohesion. This study expands the scope of translating mussel adhesion from simple Dopa-functionalization to mimicking the context of the local environment around Dopa. M arine mussels (Figure 1a) attach to hard surfaces, e.g., mineral and metal, in the intertidal zone where waves with and without suspended sand often exceed 25 m/sec velocities. 3,4-Dihydroxyphenylalanine (Dopa), a main constituent in mussel foot proteins (mfps) and substantially contributing to wet adhesion, has been incorporated in synthetic polymers to mimic the bio wet-adhesion. 1−5 However, other constitutional features of mfps, e.g., cationic residues (lysine, K), anionic residues (aspartic acid, D), nonionic polar residues (asparagine, N), and nonpolar residues (alanine, A), have not typically been included in mussel-inspired synthetic wet-adhesion systems. 1,2Here, we studied the microphase behavior and wet-adhesion of copolyampholytes with fixed catechol content and varied other key functionalities. Potential effects of aromatic moieties (Tyr, Trp) besides Dopa in mfp-3s have not been specifically tested in the present structural design of the model copolyampholytes. Conditions for the experiments were adjusted according to the microenvironmental conditions of adhesive protein deposition under the mussel's foot including acidic to neutral pH and ionic strength of ≤100 mM. 3,4 In mussel adhesion, polyelectrolyte adhesive proteins or mfps are presented to target surfaces after being condensed as a dense fluid by complex coacervation, a critical ste...

Thermal stability and optical transparency are important factors for flexible electronics and heat-related applications of pressure-sensitive adhesives (PSAs). However, current acryl- and rubber-based PSAs cannot attain the required thermal stability, and silicon-based PSAs are much more expensive than the alternatives. Oleo-chemicals including functionalized plant oils have great potential to replace petrochemicals. In this study, novel biobased PSAs from soybean oils were developed with excellent thermal stability and transparency as well as peel strength comparable to current PSAs. In addition, the fast curing (drying) property of newly developed biobased PSAs is essential for industrial applications. The results show that soybean oil-based PSA films and tapes have great potential to replace petro-based PSAs for a broad range of applications including flexible electronics and medical devices because of their thermal stability, transparency, chemical resistance, and potential biodegradability from triglycerides.

Marine mussels and barnacles are sessile biofouling organisms that adhere to a number of surfaces in wet environments and maintain remarkably strong bonds. Previous synthetic approaches to mimic biological wet adhesive properties have focused mainly on the catechol moiety, present in mussel foot proteins (mfps), and especially rich in the interfacial mfps, for example, mfp-3 and -5, found at the interface between the mussel plaque and substrate. Barnacles, however, do not use Dopa for their wet adhesion, but are instead rich in noncatecholic aromatic residues. Due to this anomaly, we were intrigued to study the initial contact adhesion properties of copolymerized acrylate films containing the key functionalities of barnacle cement proteins and interfacial mfps, for example, aromatic (catecholic or noncatecholic), cationic, anionic, and nonpolar residues. The initial wet contact adhesion of the copolymers was measured using a probe tack testing apparatus with a flat-punch contact geometry. The wet contact adhesion of an optimized, bioinspired copolymer film was ∼15.0 N/cm(2) in deionized water and ∼9.0 N/cm(2) in artificial seawater, up to 150 times greater than commercial pressure-sensitive adhesive (PSA) tapes (∼0.1 N/cm(2)). Furthermore, maximum wet contact adhesion was obtained at ∼pH 7, suggesting viability for biomedical applications.