Articles you may be interested inFano resonance control in a photonic crystal structure and its application to ultrafast switching Appl. Phys. Lett. 105, 061117 (2014); 10.1063/1.4893451The chirp-control of frequency-tunable narrowband terahertz pulses by nonlinearly chirped laser pulse beating Appl. Phys. Lett.Adapting optimal control theory and using learning loops to provide experimentally feasible shaping mask patterns

No abstract

In this study, filtration of aluminum alloy (Al) with different weight fractions of SiC particles (SiCp) was investigated. Therefore, three different filter materials of 20 pores per inch (ppi) ceramic foam filters (CFF) were tested. A special three-chamber furan mold was used for the casting trials to provide uniform filling and flow conditions for the filtration process. Samples from sections of the gating system, as well as from the filter, were analyzed by optical light microscopy to determine the amount, size, and distribution of SiCp. A scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDS) was used for obtaining the element distribution in the composite. The filtration efficiency increased by decreasing the weight fraction from 20 to 5% of SiCp and reached a significant particle reduction of over 90%. Investigations of CFFs with a weight fraction of 10% have shown a clogging effect and metal flow interruption through the 20 ppi filter. An oxide layer was detected around the respective SiCp in the EDS. Moreover, a strong accumulation effect was observed, indicated by a steadily flattening curve of the density functions after each additional remelting cycle of the same composite material.

No abstract