In this study, GFRP plates were friction stir processed at three different feed rates (15 mm/min, 20 mm/min and 25 mm/min) and at a constant spindle speed of 1500 rpm with an aim to enhance their microstructural properties. The friction stir processed plates were then subjected to milling with solid carbide K6 end mill tools. Millings trials were carried out using a Taguchi’s L9 orthogonal array under three input parameters such as cutting speed, feed and depth of cut each having three levels. The statistical significance of the process parameters was estimated using signal to noise (S/N) ratio and Analysis of Variance (ANOVA). The study showed that cutting speed during milling and feed rate during FSP contributed to the overall performance which was assessed in terms of surface roughness and delamination factor.
The forming of low and high strength tailor welded steel sheets into preferred three-dimensional shapes by a homogeneous distribution of plastic strain is highly difficult. In this work, the formability of tailor-welded blanks prepared using laser welding of low (IS 513 CR2, IS 513 CR3) and high tensile strength (AISI 304) steel sheets were analyzed and the formation of the edge profile and weld line movement was also examined. The results showed a decrease in formability characteristics owing to the increase in Strength Ratio. Scanning Electron Microscope analysis of the fracture locations within unsuccessfully formed tailor welded blanks showed the presence of tempered martensite in the soft zone was found to be the most predominant factor affecting its failure. The formability characteristics of investigated tailored blanks were predicted using finite element simulation and compared with experimented results for validation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.