Abstract:The latest technological advances in space-borne imagery have significantly enhanced the acquisition of high-quality data. With the availability of very high-resolution satellites, such as Pléiades, it is now possible to estimate tree parameters at the individual level with high fidelity. Despite innovative advantages on high-precision satellites, data acquisition is not yet available to the public at a reasonable cost. Unmanned aerial vehicles (UAVs) have the practical advantage of data acquisition at a higher spatial resolution than that of satellites. This study is divided into two main parts: (1) we describe the estimation of basic tree attributes, such as tree height, crown diameter, diameter at breast height (DBH), and stem volume derived from UAV data based on structure from motion (SfM) algorithms; and (2) we consider the extrapolation of the UAV data to a larger area, using correlation between satellite and UAV observations as an economically viable approach. Results have shown that UAVs can be used to predict tree characteristics with high accuracy (i.e., crown projection, stem volume, cross-sectional area (CSA), and height). We observed a significant relation between extracted data from UAV and ground data with R 2 = 0.71 for stem volume, R 2 = 0.87 for height, and R 2 = 0.60 for CSA. In addition, our results showed a high linear relation between spectral data from the UAV and the satellite (R 2 = 0.94). Overall, the accuracy of the results between UAV and Pléiades was reasonable and showed that the used methods are feasible for extrapolation of extracted data from UAV to larger areas.
Automatic discrimination of tree species and identification of physiological stress imposed on forest trees by biotic factors from unmanned aerial systems (UAS) offers substantial advantages in forest management practices. In this study, we aimed to develop a novel workflow for facilitating tree species classification and the detection of healthy, unhealthy, and dead trees caused by bark beetle infestation using ultra-high resolution 5-band UAS bi-temporal aerial imagery in the Czech Republic. The study is divided into two steps. We initially classified the tree type, either as broadleaf or conifer, and we then classified trees according to the tree type and health status, and subgroups were created to further classify trees (detailed classification). Photogrammetric processed datasets achieved by the use of structure-from-motion (SfM) imaging technique, where resulting digital terrain models (DTMs), digital surface models (DSMs), and orthophotos with a resolution of 0.05 m were utilized as input for canopy spectral analysis, as well as texture analysis (TA). For the spectral analysis, nine vegetation indices (VIs) were applied to evaluate the amount of vegetation cover change of canopy surface between the two seasons, spring and summer of 2019. Moreover, 13 TA variables, including Mean, Variance, Entropy, Contrast, Heterogeneity, Homogeneity, Angular Second Moment, Correlation, Gray-level Difference Vector (GLDV) Angular Second Moment, GLDV Entropy, GLDV Mean, GLDV Contrast, and Inverse Difference, were estimated for the extraction of canopy surface texture. Further, we used the support vector machine (SVM) algorithm to conduct a detailed classification of tree species and health status. Our results highlighted the efficiency of the proposed method for tree species classification with an overall accuracy (OA) of 81.18% (Kappa: 0.70) and health status assessment with an OA of 84.71% (Kappa: 0.66). While SVM proved to be a good classifier, the results also showed that a combination of VI and TA layers increased the OA by 4.24%, providing a new dimension of information derived from UAS platforms. These methods could be used to quickly evaluate large areas that have been impacted by biological disturbance agents for mapping and detection, tree inventory, and evaluating habitat conditions at relatively low costs.
Background: High-resolution images from unmanned aerial vehicles (UAVs) can be used to describe the state of forests at regular time periods in a cost-effective manner. The purpose of this study was to assess the performance of a line template matching algorithm, the Hough transformation, for detecting fallen logs from UAV-based high-resolution RGB images. The suggested methodology does not aim to replace any known aerial method for log detection, rather it is more oriented to the detection of fallen logs in open forest stands with a high percentage of log visibility and straightness. Methods: This study describes a line template matching algorithm that can be used for the detection of fallen logs in an automated process. The detection technique was based on object-based image analysis, using both pixel-based and shape descriptors. To determine the actual number of fallen logs, and to compare with the ones predicted by the algorithm, manual visual assessment was used based on six high-resolution orthorectified images. To evaluate if a line matched, we used a voting scheme. The total number of detected fallen logs compared with the actual number of fallen logs based on several accuracy metrics. To evaluate predictive models we tested the cross-validation mean error. Finally, to test how close our results were to chance, we used the Cohen`s Kappa coefficient. Results: The detection algorithm found 136 linear objects, of which 92 of them were detected as fallen logs. From the 92 detected fallen logs, 86 were correctly predicted by the algorithm and 24 were falsely detected as fallen logs. The calculated amount of observed agreement was equal to 0.78, whereas the expected agreement by chance was 0.61. Finally, the kappa statistic was 0.44. Conclusions: Our methodology had high reliability for detecting fallen logs based on total user‘s accuracy (94.9%), whereas a Kappa of 0.44 indicated there was good agreement between the observed and predicted values. Also, the cross-validation analysis denoted the efficiency of the proposed method with an average error of 16%.
Abstract:Modelling the spatial distribution of plants is one of the indirect methods for predicting the properties of plants and can be defined based on the relationship between the spatial distribution of vegetation and environmental variables. In this article, we introduce a new method for the spatial prediction of the dominant trees and species, through a combination of environmental and satellite data. Based on the basal area factor (BAF) frequency for each tree species in a total of 518 sample plots, the dominant tree species were determined for each plot. Also, topographical maps of primary and secondary properties were prepared using the digital elevation model (DEM). Categories of soil and the climate maps database of the Doctor Bahramnia Forestry Plan were extracted as well. After pre-processing and processing of spectral data, the pixel values at the sample locations in all the independent factors such as spectral and non-spectral data, were extracted. The modelling rates of tree and shrub species diversity using data mining algorithms of 80% of the sampling plots were taken. Assessment of model accuracy was conducted using 20% of samples and evaluation criteria. Random forest (RF), support vector machine (SVM) and k-nearest neighbor (k-NN) algorithms were used for spatial distribution modelling of dominant species groups using environmental and spectral variables from 80% of the sample plots. Results showed physiographic factors, especially altitude in combination with soil and climate factors as the most important variables in the distribution of species, while the best model was created by the integration of physiographic factors (in combination with soil and climate) with an overall accuracy of 63.85%. In addition, the results of the comparison between the algorithms, showed that the RF algorithm was the most accurate in modelling the diversity.
Crown canopy is a significant regulator of forest, affecting microclimate, soil conditions and having an undeniable role in a forest ecosystem. Among the different materials and approaches that have been used for the estimation of crown canopy, satellite based methods are among the most successful methods regarding cost-saving efforts and different kinds of options for measuring the crown canopy. Different types of satellite sensors can result in different outputs due to their various spectral and spatial resolution, even when using the same methodologies. The aim of this review is to assess different remote sensing methods for forest crown canopy density assessment.
Timber volume is an important asset, not only as an ecological component, but also as a key source of present and future revenues, which requires precise estimates. We used the Trimble TX8 survey-grade terrestrial laser scanner (TLS) to create a detailed 3D point cloud for extracting total tree height and diameter at breast height (1.3 m; DBH). We compared two different methods to accurately estimate total tree heights: the first method was based on a modified version of the local maxima algorithm for treetop detection, “HTTD”, and for the second method we used the centers of stem cross-sections at stump height (30 cm), “HTSP”. DBH was estimated by a computationally robust algebraic circle-fitting algorithm through hierarchical cluster analysis (HCA). This study aimed to assess the accuracy of these descriptors for evaluating total stem volume by comparing the results with the reference tree measurements. The difference between the estimated total stem volume from HTTD and measured stems was 2.732 m3 for European oak and 2.971 m3 for Norway spruce; differences between the estimated volume from HTSP and measured stems was 1.228 m3 and 2.006 m3 for European oak and Norway spruce, respectively. The coefficient of determination indicated a strong relationship between the measured and estimated total stem volumes from both height estimation methods with an R2 = 0.89 for HTTD and R2 = 0.87 for HTSP for European oak, and R2 = 0.98 for both HTTD and HTSP for Norway spruce. Our study has demonstrated the feasibility of finer-resolution remote sensing data for semi-automatic stem volumetric modeling of small-scale studies with high accuracy as a potential advancement in precision forestry.
A few studies have recently been published on changes in land use/land cover (LU/LC) of Angolan Miombo forests, however, none have attempted to offer forest management solutions for degraded Miombo forests. Landscapes are witness to past and present natural and social processes influencing the environment, where each period in the past leaves footprints on the landscape's development, which can be described by a continual decrease in forest area over time. The expansion of degraded areas from 2000 to 20017 began near urban areas where many Miombo forests have been eliminated or highly degraded, particularly in the southwest and northeast of the Huambo province. Large areas of degraded forests were observed along the Benguela railway (Caminho de ferro de Benguela). Our detailed analysis of the landcover map suggests that the impact has been devastating and there is no form of forest protection, which leads to unregulated exploitation. Descriptions of the Miombo forest dynamics are explained using height-diameter curves developed for different vegetation types that provide important insights about forest structures in the management zones. The height-diameter models differed for all vegetation types, and four management zones (MZ) were created based on a set of particular attributes. The vegetation types differed in each management zone, which included agricultural land and bare soil (MZ-E), grassland or savanna (MZ-C), open Miombo forests (MZ-B), and closed Miombo forests (Miombo forests). The four management zones were easily identified on the available maps and the height-diameter models developed represent a fundamental tool for future studies on forest planning.Sustainability 2019, 11, 98 2 of 20 agreed definition of forest degradation which makes the discussion more complex [3]. Deforestation is considered the result of the clearing of land for agriculture [4], both for the large-scale production of global commodities [5,6] and, in Africa, for small-scale production of food and cash crops [7]. Deforestation is among the most commonly studied phenomena in the frontier literature, as it is often associated with negative impacts on the global climate and biodiversity [6,8]. The scale of the environmental legacy of deforestation is dependent on both the magnitude and timing of historic land cover changes, not merely the snapshot of forest cover that is directly observable today [9][10][11][12][13][14]. The most important anthropogenic alterations of natural environments have always been the clearing of forests to establish cropland and pasture, and the exploitation of forests for fuelwood and construction materials. Analysing landscape changes due to past and present natural and social processes at different scales over time constitutes the departure point for landscape management because of close links between forests and physical attributes of the landscape. The mix of LC and LU (landscape composition) usually includes agricultural lands and native vegetation, and human dwellings in villages and urban areas. Th...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.