A new technique is described for manufacturing silicon wafers with the highest capability yet reported for gettering transition metallic, oxygen, and hydrogen impurities in CMOS image sensor fabrication. It is demonstrated that this technique can implant wafers simultaneously with carbon and hydrogen elements that form the projection range by using hydrocarbon compounds. Furthermore, these wafers can getter oxygen impurities out-diffused from the silicon substrate to the carbon cluster ion projection range during heat treatment. Therefore, they can reduce the formation of transition metals and oxygen-related defects in the device active regions and improve electrical performance characteristics, such as dark current and image lag characteristics. The new technique enables the formation of high-gettering-capability sinks for transition metals, oxygen, and hydrogen impurities under device active regions of CMOS image sensors. The wafers formed by this technique have the potential to significantly reduce dark current in advanced CMOS image sensors.

A new technique is described for manufacturing advanced silicon wafers with the highest capability yet reported for gettering transition metallic, oxygen, and hydrogen impurities in CMOS image sensor fabrication processes. Carbon and hydrogen elements are localized in the projection range of the silicon wafer by implantation of ion clusters from a hydrocarbon molecular gas source. Furthermore, these wafers can getter oxygen impurities out‐diffused to device active regions from a Czochralski grown silicon wafer substrate to the carbon cluster ion projection range during heat treatment. Therefore, they can reduce the formation of transition metals and oxygen‐related defects in the device active regions and improve electrical performance characteristics, such as the dark current, white spot defects, pn‐junction leakage current, and image lag characteristics. The new technique enables the formation of high‐gettering‐capability sinks for transition metals, oxygen, and hydrogen impurities under device active regions of CMOS image sensors. The wafers formed by this technique have the potential to significantly improve electrical devices performance characteristics in advanced CMOS image sensors.

We developed silicon epitaxial wafers with high gettering capability by using hydrocarbon–molecular–ion implantation. These wafers also have the effect of hydrogen passivation on process-induced defects and a barrier to out-diffusion of oxygen of the Czochralski silicon (CZ) substrate bulk during Complementary metal-oxide-semiconductor (CMOS) device fabrication processes. We evaluated the electrical device performance of CMOS image sensor fabricated on this type of wafer by using dark current spectroscopy. We found fewer white spot defects compared with those of intrinsic gettering (IG) silicon wafers. We believe that these hydrocarbon–molecular–ion–implanted silicon epitaxial wafers will improve the device performance of CMOS image sensors.

The effect of oxygen (O) concentration on the Fe gettering capability in a carbon-cluster (C 3 H 5 ) ion-implanted region was investigated by comparing a Czochralski (CZ)-grown silicon substrate and an epitaxial growth layer. A high Fe gettering efficiency in a carbon-cluster ion-implanted epitaxial growth layer, which has a low oxygen region, was observed by deep-level transient spectroscopy (DLTS) and secondary ion mass spectroscopy (SIMS). It was demonstrated that the amount of gettered Fe in the epitaxial growth layer is approximately two times higher than that in the CZ-grown silicon substrate. Furthermore, by measuring the cathodeluminescence, the number of intrinsic point defects induced by carboncluster ion implantation was found to differ between the CZ-grown silicon substrate and the epitaxial growth layer. It is suggested that Fe gettering by carbon-cluster ion implantation comes through point defect clusters, and that O in the carbon-cluster ion-implanted region affects the formation of gettering sinks for Fe.