Installation of decentralized grey water treatment systems in small rural communities contributes to a more sustainable water supply. In order to gauge community attitudes about collection and use of grey water, a door-to-door survey in the farming community of Deir Alla, Jordan was conducted by Royal Scientific Society interviewers. Outcomes of a detailed survey, designed specifically for this project, offer insights on people's views on general water and wastewater issues, as well as their motivation, practices and concerns related to using grey water treatment for a portion of their household wastewater and reuse of the treated grey water for irrigation. A total of 47 respondents from different socio-economic background, aged over 18 years, from this community in the Jordan valley took part in the survey. The level of formal education of the respondents was low, and most of households' incomes were below the poverty line in Jordan. Most of the respondents reported that the quality of water supplied by public network is acceptable, but the quantity is insufficient to meet their demand, with supplies being delivered to the household once a week. Respondents relied on the public water network as a first-most important resource (85.1%), and 57.4% of the respondent relied on private water tankers as a second-most important resource in addition to the public network. However, 6% of the respondents relied only on private water tankers with no access to the public network. Storage tanks are common practice in all the houses in order to store enough water for at least one week. The survey responses provide evidence that rural communities are willing
OPEN ACCESSWater 2012, 4 581 to accept reuse of treated grey water for irrigation. Furthermore, some of people in the studied area are willing to learn more about grey water treatment and reuse in order to operate grey water systems for irrigation purposes. Water scarcity in this rural area of Jordan is the main determinant of willingness to reuse the grey water, rather than socio-economic variables.
The management of waste wash-water (WWW) is one of the most significant environmental problems associated with ready-mix concrete production worldwide. The problems are exacerbated should it be disposed of in an inappropriate manner. This study evaluated the potential of WWW recycling in ready mix concrete plants in Jordan. A representative waste wash-water sample (400 L) was collected from a basin in a ready-mix concrete company. A pilot plant on the lab scale was fabricated and installed. The treatment system consisted of a concrete washout reclaimer, wedgebed slurry settling pond, slow sand filtration unit, and a neutralization unit. Water samples were collected from all stages of the pilot plant and analyzed. The collected waste wash-water samples were utilized for replacement of well water (mixing water) at various ratios. Fourteen concrete mixtures were produced and cast, as well as tested at various curing ages (7, 28, and 90 days). The results show that the raw WWW was not acceptable as mixing water even after dilution as it led to significant reductions in concrete compressive strength and low workability. However, the WWW from the settling pond, the filtered WWW and the filtered-neutralized WWW at dilution ratios up to 75% were shown to be potential alternatives to fresh water for ready-mixed concrete. Therefore, the current guidelines for mixing water quality should be revised to encourage the reuse of the WWW.
One of the main problems that limit the extensive use of photovoltaic (PV) systems is the increase in the temperature of PV panels. Overheating of a PV module decreases the performance of the output power by 0.4% to 0.5% per 1°C over its rated temperature that in most cases is 25°C. An effective way of improving electrical performance (power output and efficiency) and reducing the rate of thermal degradation of a PV module is to reduce the operating temperature of the PV surface by a cooling medium. To achieve this, nanofluids can be considered as a potentially effective solution for cooling. In this study, two types of nanofluids, namely Al2O3 and TiO2 water‐based mixture of different volume flow rates and concentrations (0.01%, 0.05%, and 0.1%) by weight, were used. Also, three PV panels were cooled simultaneously using nanofluids, water, and natural air, respectively. Results showed that nanofluids for cooling enhanced heat transfer rate much better than water and natural air. Best results were achieved for TiO2 nanofluids at the considered concentration (0.1 wt%). Nanofluid cooling of turbulent flows for such an application has not been investigated before. These results represent the first application of nanofluid cooling in the turbulent flow regimes and in outdoor conditions including real solar irradiation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.