Wood materials are increasingly being used in the construction of structural beams, sports equipment, etc. This study was carried out to determine the bonding strength of phenol-formaldehyde (PF) and melamine-formaldehyde (MF) adhesives to impregnated wood materials. For this purpose, brutia pine (Pinus brutia Ten) and elm (Ulmus compestris L.) woods were impregnated with borax (Bx), boric acid (Ba), Bx + Ba (wt:wt 50:50%), di-ammonium phosphate (D), [D + (Bx + Ba)]/ (50 + (25 + 25%), w/w) and Tanalith-C 3310 (T-C 3310) using the vacuum method according to ASTM-D 1413-76. The effects of wood species, impregnating material and type of adhesive on the bonding strength were determined. The highest shear strength (11.09 N/mm 2 ) was obtained from elm wood control (i.e., without any impregnating materials) samples with MF; thus, the impregnation process negatively affected the adhesive bonding strength. Impregnating materials, especially those containing oily or similar solutions such as T-C 3310, are not advised for wood elements which are subjected to shear.
Wood dowels are commonly used in the construction furniture, but little information is available about the additive effects of dowels on the ultimate withdrawal strength of single or multidowel joints. This study was carried out to determine the tensile strength of 10-mm-diameter dowels produced from medium-density fiberboard (MDF), plywood, scotch pine (Pinus sylvestris L.), and beech (Fagus orientalis lipsky), bonded parallel and vertical to the surface of MDF and particleboard (Pb) with poly(vinyl acetate) (PVAc) and Desmodur-VTKA (D-VTKA). Tensile strength was applied to the dowels according to the procedure in the ASTM-D 1037 standard. The effects of dowel species, direction of tensile, composite material, and type of adhesive on tensile strength were determined. The results showed that the highest tensile strength was obtained in beech dowels bonded vertically with PVAc adhesive to the surface of MDF at 7.91 N/mm 2 . If the dowels used in furniture production are subjected to great tensile strength, beech dowels bonded with PVAc adhesive on MDF should be used. However, when dowels produced from MDF and plywood waste are used, they also can produce positive results.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.