Studies of grain drying with ozone-air mixture were carried out to detect the ozone penetration patterns through the grain mound of various moisture content (14.6 ≤ w 0 ≤ 23.0%) at different ozone concentrations (500 ≤ C 0 ≤ 1250 ppb) in the supplied air. The ozone penetration through the grain layer depends on the initial ozone concentration in the supplied air, ozonation time, velocity of the supplied air, height of the grain mound, initial grain moisture content and mycobiotic contamination of grain surface. It was determined that in a 60 cm height of the grain layer ozone is first recorded after 12 h, and at 105 cm – only after 34 h at w 0 = 19.0%, C 0 = 500 ppb. If the initial concentration of ozone is higher, it is first recorded sooner. Ozone penetration through the grain layer with higher moisture level is slower, and ozone reaction with grain surface and microflora present on it is longer. Hypothesis about the adequacy of the model (how it reflects the real process) has been verified by calculating reproduction and adequacy variance. The mathematical model could be applied for prediction of the course of grain ozonation process. Santrauka Grūdų džiovinimo ozono ir oro mišiniu tyrimai atlikti siekiant išaiškinti ozono skverbties per skirtingo drėgnio grūdų sampilą dėsningumus (14,6 ≤ w 0 ≤ 23,0%), esant skirtingoms ozono koncentracijoms (500 ≤ C 0 ≤ 1250 ppb) tiekiamame ore. Ozono skverbtis grūdų sluoksnyje priklauso nuo pradinės ozono koncentracijos tiekiamame ore, ozonavimo trukmės, tiekiamo oro greičio, grūdų sampilo aukščio, pradinio grūdų drėgnio ir jų paviršiaus mikobiotinio užterštumo. 60 cm grūdų sluoksnio aukštyje ozonas pradėtas fiksuoti po 12 h, o 105 cm – tik po 34 h, kai w 0 = 19,0%, C 0 = 500 ppb. Padidinus pradinę ozono koncentraciją, ozonas pradedamas fiksuoti greičiau. Ozonuojant drėgnesnius grūdus, ozonas per jų sluoksnį skverbiasi lėčiau, vyksta ilgesnė jo reakcija su grūdų paviršiumi ir ant jų esančia mikroflora. Hipotezė apie modelio adekvatumą (kaip jis atspindi realų procesą) buvo patikrinta apskaičiavus reprodukcijos ir adekvatumo dispersijas. Sudarytas matematinis modelis gali būti taikomas grūdų ozonavimo procesui prognozuoti.
Application of hydroponic systems in feed production has not been extensively studied. Therefore, there is insufficient data on the effect of the slope of hydroponic growing trays used in the nutrient film technique on wheat fodder yield and its qualitative parameters. The slope of the trays has only been studied for food crops. This study conducted experimental research using a nutrient film technique hydroponic fodder growing device to evaluate the impact of growing tray slope angle on hydroponic wheat fodder production. The slope angle of the growing trays was changed from 2.0% (1.15°) to 8.0% (4.57°) with increments of 1.5% (0.86°). This research used two different light sources for wheat sprout illumination: indoor lighting (fluorescent lamps) and light-emitting diode illumination. In addition, two nutrient solutions were used for sprout irrigation: tap water and a solution enriched with macro- and microelements. Experimental studies confirmed the hypothesis that the slope angle of growing trays significantly affects the yield of wheat fodder grown for seven days. Analyzing the results, we found that the highest yield of wheat fodder after seven days of cultivation was achieved with growing trays sloped by 6.5% and using indoor lighting. In addition, we achieved the highest wheat fodder dry matter content using a 6.5% slope angle. Experimental studies also confirmed the hypothesis that using macro- and micronutrients in the nutrient solution does not significantly affect the yield of wheat fodder grown hydroponically for seven days.
Food safety assurance is one of the most important and significant issues in the activity of the food sector. Product certification process according to various standards means the highest quality not only for the company but for the consumer as well. Company's executives are free to choose what a management system should be introduced in the organization. It must be effective and viable. International standards and modern quality management systems have been developed and currently are widely used to accomplish this task. In order to ensure the highest quality requirements in all food supply chain, companies often implement and integrate quality, environmental and food safety management. However, the company's executives faces many difficulties to select which of the management systems is superior and the most appropriate for certain company. This paper analyses the requirements of the international standards towards the food safety and quality for the establishment of food quality and food safety management systems; similarities and differences between them, to evaluate the application of these systems, the main advantages and disadvantages. Implementation of the quality and safety management systems in Lithuanian food companies was analysed. At least one management system is certified at the 87 Lithuanian food companies. Of these, the management system according to the ISO 9001:2015 standard is certified at 48 companies, according to the ISO 22000:2005 -at 53 companies, and according to the requirements of the British Retail Consortium standard -at 31 companies. Even 45% of the companies have implemented and are certified by two or more mutually integrated management systems.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.