We report an accurate determination of the hydrodynamic boundary condition of simple liquids flowing on smooth hydrophobic surfaces using a dynamic surface force apparatus equipped with two independent subnanometer resolution sensors. The boundary slip observed is well defined and does not depend on the scale of investigation from one to several hundreds of nanometers, nor on shear rate up to 5 x 10(3)s(-1). The slip length of 20 nm is in good agreement with theory and numerical simulations concerning smooth nonwetting surfaces. These results disagree with previous data in the literature reporting very high boundary slip on similar systems. We discuss possible origins of large slip length on smooth hydrophobic surfaces due to their contamination by hydrophobic particles.

Reducing the friction of liquid flows on solid surfaces has become an important issue with the development of microfluidics systems, and more generally for the manipulation of fluids at small scales. To achieve high slippage of liquids at walls, the use of gas as a lubricant--such as microbubbles trapped in superhydrophobic surfaces--has been suggested. The effect of microbubbles on the effective boundary condition has been investigated in a number of theoretical studies, which basically show that on flat composite interfaces the magnitude of the slippage is proportional to the periodicity of the gaseous patterns. Recent experiments aiming to probe the effective boundary condition on superhydrophobic surfaces with trapped bubbles have indeed shown high slippage in agreement with these theoretical predictions. Here, we report nanorheology measurements of the boundary flow on a surface with calibrated microbubbles. We show that gas trapped at a solid surface can also act as an anti-lubricant and promote high friction. The liquid-gas menisci have a dramatic influence on the boundary condition, and can turn it from slippery to sticky. It is therefore essential to integrate the control of menisci in fluidic microsystems designed to reduce wall friction.

A dynamic surface force apparatus is used to determine the intrinsic flow boundary condition of two simple liquids, water and dodecane, on various smooth surfaces. We demonstrate the impact of experimental errors and data analysis on the accuracy of slip length determination. In all systems investigated, the dissipation is described by a well-defined boundary condition accounting for a whole range of separation, film thickness, and shear rate. A no-slip boundary condition is found in all wetting situations. On strongly hydrophobic surfaces, water undergoes finite slippage that increases with hydrophobicity. We also compare the relative influence of hydrophobicity and liquid viscosity on boundary flow by using water-glycerol mixtures with similar wetting properties.