A method for obtaining electrocardiographic potential through thin cloth inserted between the measuring electrodes and the skin of a subject's dorsal surface when lying supine has been proposed. The method is based on capacitive coupling involving the electrode, the cloth, and the skin. Examination of a pilot device which employed the method revealed the following: (1) In spite of the gain attenuation in the high frequency region, the proposed method was considered useful for monitoring electrogardiogram (ECG) for nondiagnostic purpose. (2) The method was able to yield a stable ECG from a subject at rest for at least 7 h, and there was no significant adverse effect of long-term measurement on the quality of the signal obtained. (3) Electrode area was the factor that had most influence on the signal, compared with other factors such as cloth thickness and coupling pressure, but could be reduced to 10 cm2 for heart rate detection. (4) Input capacitance of the device was assumed to be the dominant factor for the gain attenuation in the high frequency region, and should be reduced with a view to diagnostic use. Although there is still room for improvement in terms of practical use, the proposed method appears promising for application to bedding as a noninvasive and awareness-free method for ECG monitoring.

No abstract

No abstract

No abstract

No abstract

No abstract

No abstract

This paper presents an overview of the fundamentals and state of the-art in noninvasive physiological monitoring instrumentation with a focus on electrode and optrode interfaces to the body, and micropower-integrated circuit design for unobtrusive wearable applications. Since the electrode/optrode-body interface is a performance limiting factor in noninvasive monitoring systems, practical interface configurations are offered for biopotential acquisition, electrode-tissue impedance measurement, and optical biosignal sensing. A systematic approach to instrumentation amplifier (IA) design using CMOS transistors operating in weak inversion is shown to offer high energy and noise efficiency. Practical methodologies to obviate 1/f noise, counteract electrode offset drift, improve common-mode rejection ratio, and obtain subhertz high-pass cutoff are illustrated with a survey of the state-of-the-art IAs. Furthermore, fundamental principles and state-of-the-art technologies for electrode-tissue impedance measurement, photoplethysmography, functional near-infrared spectroscopy, and signal coding and quantization are reviewed, with additional guidelines for overall power management including wireless transmission. Examples are presented of practical dry-contact and noncontact cardiac, respiratory, muscle and brain monitoring systems, and their clinical applications.