The purpose of the present study was to assess the capability of finite element (FE) simulations of guided Lamb wave propagation for the characterization of the modulus of fiber-metal laminates (FMLs) and detection of the matrix cracking in them. An FE model of an FML specimen with a [Al/90 2 /Al/ 90 2 /Al] layup was developed. The matrix cracking with different densities was also induced in the fiber-reinforced composite layers of the FML model. The fundamental antisymmetric Lamb wave mode was propagated on the developed model at frequencies from 50 to 300 kHz. The Lamb wave velocity was obtained from the FE models at different frequencies. Then, the inverse Lamb wave propagation problem was solved and the elastic modulus of the simulated FML specimen was estimated. An experimental program was conducted to evaluate the results of FE simulations. The FML specimens with the same layup and materials were fabricated and underwent the tensile and Lamb wave propagation tests. The average elastic moduli of the specimens obtained from the tests, classical lamination theory, and FE simulations were in good agreement, especially at low frequencies. It was observed that the sensitivity of the Lamb wave velocity to matrix cracks was higher at high frequencies.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.