Rare earth elements (REE) are essential for the production of technological devices. However, their high demand and low availability, together with an increase in electronic waste generation, compel the development of efficient, economic and green methods for recovering these elements from electronic waste. In this work, a facile method for selective recovering of REE from Liquid Crystal Display (LCD) screen wastes, employing ultrasound assisted leaching is presented. The screen wastes were milled and sieved to pass through a − 325 mesh sieve (44 μm). The milled powder was subjected to ultrasound-assisted leaching in an aqueous medium, at room temperature (25 °C) and pH 6 for 60 min. Subsequently, a magnetic separation was applied to the leach residue. Inductively coupled plasma was employed to quantitatively analyze the composition of the LCD powders and determine the effectiveness of the extraction process. Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy allowed qualitative chemical analysis of the solid materials. The results show that the LCD screen wastes are formed, mainly, by amorphous oxides of Si, Fe, In, Sn and REE. The amount of Gadolinium (Gd) and Praseodymium (Pr) in the wastes were 93 and 24 mg kg− 1, respectively, which justifies their recovery. X-ray diffraction analysis of the magnetic portion of the leached residue, confirmed the presence of an amorphous phase together with crystalline metallic iron alloy. The magnetic behavior, obtained by Vibration Sample Magnetometry, helped to understand the nature of the residues. The formation of this metallic alloy is attributed to the effect of high power ultrasonic during the leach. It was confirmed that the magnetic residue concentrates and recovers 87 wt% of Gd and 85 wt% of Pr contained in the original material. Therefore, ultrasound-assisted leaching is a selective and facile method for recovering Gd and Pr from waste LCD.
Rare earth elements (REE) are essential for the production of technological devices. However, their high demand and low availability, together with an increase in electronic waste generation, compel the development of efficient, economic and green methods for recovering these elements from electronic waste. In this work, a facile method for selective recovering of REE from Liquid Crystal Display (LCD) screen wastes, employing ultrasound assisted leaching is presented. The screen wastes were milled and sieved to pass through a -325 mesh sieve (44 µm). The milled powder was subjected to ultrasound-assisted leaching in an aqueous medium, at room temperature (25 °C) and pH 6 for 60 min. Subsequently, a magnetic separation was applied to the leach residue. Inductively coupled plasma was employed to quantitatively analyze the composition of the LCD powders and determine the effectiveness of the extraction process. Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy allowed qualitative chemical analysis of the solid materials. The results show that the LCD screen wastes are formed, mainly, by amorphous oxides of Si, Fe, In, Sn and REE. The amount of Gadolinium (Gd) and Praseodymium (Pr) in the wastes were 93 and 24 mg kg-1, respectively, which justifies their recovery. X-ray diffraction analysis of the magnetic portion of the leached residue, confirmed the presence of an amorphous phase together with crystalline metallic iron alloy. The magnetic behavior, obtained by Vibration Sample Magnetometry, helped to understand the nature of the residues. The formation of this metallic alloy is attributed to the effect of high power ultrasonic during the leach. It was confirmed that the magnetic residue concentrates and recovers 87 wt% of Gd and 85 wt% of Pr contained in the original material. Therefore, ultrasound-assisted leaching is a selective and facile method for recovering Gd and Pr from waste LCD.
We report a facile, economic, and ecofriendly method for selective recovery of Er, Gd, Sn, and In from liquid crystal display (LCD) screen wastes by ultrasound-assisted leaching, followed by magnetic separation. Thermodynamic analysis showed that the pyrophosphate ion is an excellent leaching agent for Er, Gd, and In at pH values below 8. Dissolved screen waste powder was subjected to leaching at room temperature using aqueous solutions of 0.05 M of sodium pyrophosphate (Na 4 P 2 O 7 ) as the leaching agent; hydrogen peroxide (H 2 O 2 ) (3 v/v %) was added as an auxiliary reducing agent, and an ultrasonic source was used in the process. Once completed, magnetic separation was applied to the leached residue. The average contents of Er, In, Sn, and Gd in the LCD screen were found to be 477, 2422, 835, and 93 mg·kg –1 , respectively, of which 93, 97, 72, and 99% were selectively recovered from the waste material by this method at pH 3 after 2 h of leaching. The proposed method emerges as an easy and selective process for leaching Er from LCD screen wastes and concentrating In, Sn, and Gd in a separable magnetic solid.
Rare earth elements (REE) are essential for the production of technological devices. However, their high demand and low availability, together with an increase in electronic waste generation, compel the development of efficient, economic and green methods for recovering these elements from electronic waste. In this work, a facile method for selective recovering of REE from Liquid Crystal Display (LCD) screen wastes, employing ultrasound assisted leaching is presented. The screen wastes were milled and sieved to pass through − 325 mesh sieve. The milled powder was summited to ultrasound-assisted leaching in aqueous medium, at room temperature (25 °C) and pH 6 for 60 minutes. Subsequently, a magnetic separation was applied into the leach residue. ICP was employed to quantitatively analyze the composition of the LCD powders and the effectiveness of the extraction process. SEM-EDS allowed qualitatively analyzing the chemical composition of the solid materials. The results shown that the LCD screen wastes are formed, mainly, by amorphous oxides of Si, Fe, In, Sn and REE. The amount of Gd and Pr in the wastes were 93 mg/kg and 24 mg/kg, respectively; It represents enough reason to recover it. X-ray diffraction analysis of the magnetic portion of the leaching residue, confirmed the presence of an amorphous phase together with crystalline metallic iron alloy. The magnetic behavior, obtained by Vibration Sample Magnetometry, helped to understand the nature of the residues. The formation of this metallic alloy is attributed to the effect of high power ultrasonic during the leaching. It was confirmed that the magnetic residues concentrates and recovers 87 wt. % of Gd and 85 wt. % of Pr of the total content of these REE in the magnetic residue. Therefore, ultrasound-assisted leaching is a selective and facile method for recovering Gd and Pr from a screen wastes.
Rare earth elements (REE) are essential for the production of technological devices. However, their high demand and low availability, together with an increase in electronic waste generation, compel the development of efficient, economic and green methods for recovering these elements from electronic waste. In this work, a facile method for selective recovering of REE from Liquid Crystal Display (LCD) screen wastes, employing ultrasound assisted leaching is presented. The screen wastes were milled and sieved to pass through a -325 mesh sieve (44 µm). The milled powder was subjected to ultrasound-assisted leaching in an aqueous medium, at room temperature (25 °C) and pH 6 for 60 min. Subsequently, a magnetic separation was applied to the leach residue. Inductively coupled plasma was employed to quantitatively analyze the composition of the LCD powders and determine the effectiveness of the extraction process. Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy allowed qualitative chemical analysis of the solid materials. The results show that the LCD screen wastes are formed, mainly, by amorphous oxides of Si, Fe, In, Sn and REE. The amount of Gadolinium (Gd) and Praseodymium (Pr) in the wastes were 93 and 24 mg kg-1, respectively, which justifies their recovery. X-ray diffraction analysis of the magnetic portion of the leached residue, confirmed the presence of an amorphous phase together with crystalline metallic iron alloy. The magnetic behavior, obtained by Vibration Sample Magnetometry, helped to understand the nature of the residues. The formation of this metallic alloy is attributed to the effect of high power ultrasonic during the leach. It was confirmed that the magnetic residue concentrates and recovers 87 wt% of Gd and 85 wt% of Pr contained in the original material. Therefore, ultrasound-assisted leaching is a selective and facile method for recovering Gd and Pr from waste LCD.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.