This review presents a summary of recent progress and strategies in fabricating MOF-based nanostructures for electrochemical applications.

Replacing the rare and precious platinum (Pt) electrocatalysts with earth-abundant materials for promoting the oxygen reduction reaction (ORR) at the cathode of fuel cells is of great interest in developing high-performance sustainable energy devices. However, the challenging issues associated with non-Pt materials are still their low intrinsic catalytic activity, limited active sites, and the poor mass transport properties. Recent advances in material sciences and nanotechnology enable rational design of new earth-abundant materials with optimized composition and fine nanostructure, providing new opportunities for enhancing ORR performance at the molecular level. This Review highlights recent breakthroughs in engineering nanocatalysts based on the earth-abundant materials for boosting ORR.

The technological evolution has been progressing for centuries and will possibly increase at a higher rate in the 21st century.

Metal‐organic frameworks (MOFs) with high surface area and tunable chemical structures have attracted tremendous attention. Recently, there has been increasing interest in deriving advanced materials from MOFs for electrochemical energy storage and conversion. This progress report highlights recent breakthroughs in electrocatalysis by using MOF‐based novel catalysts, such as in oxygen reduction and evolution, hydrogen evolution and carbon dioxide reduction. The advantages of preparing electrocatalysts from MOFs are introduced and discussed. Then, the development of MOF derived electrocatalysis‐active products, such as heteroatom‐doped carbon, metal oxide (MO), metal sulfide (MS), metal carbide (MC), metal phosphide (MP) and their hybrids with carbon, are summarized. The detailed functions of these materials in representative electrocatalysis systems are also reviewed. The demonstrated examples will provide understanding in preparing highly active and stable electrocatalysts. The progress report concludes with the future applications of MOF‐based materials in the field of electrocatalysis.

This review presents a summary of recent progress and strategies in fabricating nanoencapsulated PCMs for thermal energy applications.

Cobalt sulfide (CoS2) is considered one of the most promising alternative anode materials for high-performance lithium-ion batteries (LIBs) by virtue of its remarkable electrical conductivity, high theoretical capacity, and low cost. However, it suffers from a poor cycling stability and low rate capability because of its volume expansion and dissolution of the polysulfide intermediates in the organic electrolytes during the battery charge/discharge process. In this study, a novel porous carbon/CoS2 composite is prepared by using nano metal-organic framework (MOF) templates for high-preformance LIBs. The as-made ultrasmall CoS2 (15 nm) nanoparticles in N-rich carbon exhibit promising lithium storage properties with negligible loss of capacity at high charge/discharge rate. At a current density of 100 mA g(-1), a capacity of 560 mA h g(-1) is maintained after 50 cycles. Even at a current density as high as 2500 mA g(-1), a reversible capacity of 410 mA h g(-1) is obtained. The excellent and highly stable battery performance should be attributed to the synergism of the ultrasmall CoS2 particles and the thin N-rich porous carbon shells derieved from nanosized MOF precusors.

We have developed a facile, scale up, and efficient method for the preparation of graphitic-C3N4 nanofibers (GCNNFs) as electrodes for supercapacitors and photocatalysts. The as-synthesized GCNNFs have 1D structure with higher concentration of nitrogen that is favorable for higher conductivity and electrochemical performance. Secondly, the high surface area of GCNNF provides a large electrode-electrolyte contact area, sufficient light harvesting and mass transfer, as well as increased redox potential. Thus, the GCNNF supercapacitor electrode shows high capacitance of 263.75 F g(-1) and excellent cyclic stability in 0.1 M Na2SO4 aqueous electrolyte with the capacitance retention of 93.6% after 2000 cycles at 1 A g(-1) current density. GCNNFs exhibit high capacitance of 208 F g(-1) even at 10 A g(-1), with the appreciable capacitance retention of 89.5%, which proves its better rate capability. Moreover, the GCNNF shows enhanced photocatalytic activity in the photodegradation of RhB in comparison to the bulk graphitic-C3N4 (GCN). The degradation rate constant of GCNNF photocatalyst is almost 4 times higher than GCN. The enhanced photocatalytic activity of GCNNF is mainly due to the higher surface area, appropriate bandgap, and fewer defects in GCNNF as compared to GCN. As an economical precursor (melamine) and harmless, facile, and template-free synthesis method with excellent performance both in supercapacitors and in photodegradation, GCNNF is a strong candidate for energy storage and environment protection applications.

Yolk-shell nanostructures have received great attention for boosting the performance of lithium-ion batteries because of their obvious advantages in solving the problems associated with large volume change, low conductivity, and short diffusion path for Li ion transport. A universal strategy for making hollow transition metal oxide (TMO) nanoparticles (NPs) encapsulated into B, N co-doped graphitic nanotubes (TMO@BNG (TMO = CoO, Ni O , Mn O ) through combining pyrolysis with an oxidation method is reported herein. The as-made TMO@BNG exhibits the TMO-dependent lithium-ion storage ability, in which CoO@BNG nanotubes exhibit highest lithium-ion storage capacity of 1554 mA h g at the current density of 96 mA g , good rate ability (410 mA h g at 1.75 A g ), and high stability (almost 96% storage capacity retention after 480 cycles). The present work highlights the importance of introducing hollow TMO NPs with thin wall into BNG with large surface area for boosting LIBs in the terms of storage capacity, rate capability, and cycling stability.