The paper considers the contribution of conductivity changes undergone in an anisotropical medium to measured resistance. This was achieved by extending the relationship proposed by Geselowitz to anisotropical materials described, therefore, by a conductivity tensor. It was found that each element of a conductivity change tensor contributed to the measured resistance only if a corresponding component of the electrical field was nonzero. Numerical calculations were performed for blood-flow-associated conductivity changes. A special experiment stand was developed which allowed experiments to be performed proving the theoretical results. It was found that the absolute value of resistance change measured in the direction perpendicular to the vessel axis was much smaller than that measured along the vessel axis. The results obtained may explain the fact that the actual change of measured resistance created by changes of conductivity induced by aortic blood flow is lower than expected from simplified models.
This paper considers the applicability of effective conductivity measurements for monitoring physiological and/or pathological phenomena induced by ischemia in the myocardium. The sensitivity of a probe, calculated by means of the finite element method, to changes in the conductivity of the tissue examined is defined for this purpose. Probes developed by Schafer and collaborators (1995) and in our own departments have been examined on the basis of this sensitivity. Theoretical results were verified experimentally using a tank, enlarged models of the probes, and a specially developed electronic circuit. It follows from this study that the probe developed by Schafer et al. is characterized by positive and negative sensitivity. This can lead to misinterpretation of the measurements obtained. In contrast, the sensitivity of our probe is dominantly positive. An example of the in vivo result obtained during experimentally induced ischemia in a swine heart is included.
Disorders of the heart and blood vessels are the leading cause of health problems and death. Early detection of them is extremely valuable as it can prevent serious incidents (e.g. heart attack, stroke) and associated complications. This requires extending the typical mobile monitoring methods (e.g. Holter ECG, tele-ECG) by introduction of integrated, multiparametric solutions for continuous monitoring of the cardiovascular system. In this paper we propose the wearable system that integrates measurements of cardiac data with actual estimation of the cardiovascular risk level. It consists of two wirelessly connected devices, one designed in the form of a necklace, the another one in the form of a bracelet (wrist watch). These devices enable continuous measurement of electrocardiographic, plethysmographic (impedance-based and optical-based) and accelerometric signals. Collected signals and calculated parameters indicate the electrical and mechanical state of the heart and are processed to estimate a risk level. Depending on the risk level an appropriate alert is triggered and transmitted to predefined users (e.g. emergency departments, the family doctor, etc.).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.