We present a rapid (5 min) and controlled sensitisation method for dye sensitized solar cells which gives 6.0% for the Ru dye N719 and 3.7% for the IR absorbing squaraine SQ1. Rapid co-sensitization (N719 and SQ1) gives efficiencies up to 7.9%. Devices have similar or better efficiency to those dyed passively for 18 h.

This paper describes the synthesis of a new, yellow triphenylamine dye, 4-[2-(4-diphenylaminophenyl) vinyl]benzoic acid] (6), with a sorption maximum at 380 nm in solution for which EQE data show shifts to 420 nm on sorption to TiO 2 . The performance of this dye has been measured in dye-sensitized solar cell (DSC) devices, showing h ¼ 2.6% for 1 cm 2 devices. Light soaking of (6) shows excellent long-term stability with <10% variation in device performance over 1800 h. Full characterization data are reported for ( 6) and the intermediates used in its synthesis including single-crystal X-ray structural analysis of all compounds. The paper also describes the ultra-fast dye sensitization and co-sensitization of TiO 2 photo-electrodes in 5 minutes using one or two dyes and the first example of ultra-fast tri-sensitization. The dyes tested include the ruthenium dye N719, the squaraine dye SQ1, the red triphenylamine dye 2-cyano-3-{4-[2-(4-diphenylaminophenyl)vinyl]phenyl}acrylic acid ( 5) and ( 6). DSC efficiencies of 7.5% have been achieved for 1 cm 2 devices co-sensitized using (6) and N719. These efficiencies exceed those recorded for single dye devices and EQE measurements confirm efficient photon capture from two or more dyes in a single photo-electrode. Photo-acoustic calorimetry (PAC) has also been used to measure the energy of the charge separation states formed for (6) and N719, showing a larger value (1.47 eV) for (6) compared to N719 (1.08 eV), whilst a TiO 2 film co-sensitized with both (6) and N719 gave an intermediate value (1.28 eV). These data have been used to calculate dye HOMO, LUMO and l max levels for (6) and N719 leading to important insights for future successful co-sensitization.

This paper reports the synthesis of a series of new half-squaraine dyes (Hf-SQ) based around a common chromophoric unit but with differently positioned linker groups.

Organic hole-transporting materials (HTM) have shown excellent ability in achieving high efficiency perovskite solar cells.

Enhancing the spectral response of dye-sensitized solar cells (DSC) is essential to increasing device efficiency and a key approach to achieve this is co-sensitization (i.e. the use of multiple dyes to absorb light from different parts of the solar spectrum). However, precise control of dye loading within DSC mesoporous metal oxide photo-anodes is non-trivial especially for very rapid processing (minutes). This is further complicated by dyes having very different partition (K d ) and molar extinction (3) coefficients which strongly influence dye uptake and spectral response, respectively. Here, we present a highly versatile, ultra-fast (ca. 5 min) desorption and re-dyeing method for dye-sensitized solar cells which can be used to precisely control dye loading in photo-electrode films. This method has been successfully applied to re-dye, partially desorb and re-dye and selectively desorb and re-dye photo-electrodes using examples of a Ru-bipy dye (N719) and also organic dyes (SQ1 and D149) giving h up to 8.1% for a device containing the organic dye D149 and re-dyed with the Ru dye N719. The paper also illustrates how this method can be used to rapidly screen large numbers of dyes (and/or dye combinations) and also illustrates how it can also be used to selectively study dye loading.

This paper considers the manufacturing issues associated with dimethyl formamide, γ-butyrolactone, dimethyl sulfoxide and chlorobenzene solvents, in particular the health and safety issues of using these solvents in scaled perovskite photovoltaic processing. Issues of device lifetime are also considered, for example the effects of atmospheric conditions (e.g. humidity).

This paper studies the effects of different numbers of linkers on half-squaraine dyes in DSC devices.

Precursors to three new 3,4-ethylenedioxythiophene (EDOT) incorportaing dyes have been synthesisedviaa one-pot C–H activation route usingN,N-dimethylaniline as a donor group.