The present paper reports on the numerical simulation of flow dynamics in a model gas-turbine combustor by large eddy simulation in order to evaluate the effect of coherent flow structures on the local fluctuations of gas temperature and local concentrations of NO and CO. The simulations were performed for a generic swirler, based on the design by Turbomeca, for a Reynolds number of 15,000 at normal and elevated inlet temperature and pressure (up to 500 K and 3.4 atm). The simulation data were validated based on the velocity measurements by stereoscopic particle image velocimetry. In order to reveal coherent flow structures, the velocity snapshots were processed by the proper orthogonal method. The temporal coefficients of the decomposition were used to evaluate the conditional sampled spatial distributions of the temperature and species concentration. It is shown that the coherent fluctuations of temperature can locally reach up to 200 K with the fluctuations of NO up to 20%. Thus, the results demonstrate that coherent flow structures in a lean swirl combustor can sufficiently contribute to NOx emission.
Currently, thermal power plants operating on hydrocarbon fuels (gas, fuel oil, peat, shale, etc.) are one of the main sources of electricity. An effective and promising method for suppressing harmful emissions (NOx, carbon oxides, soot) from the combustion of fossil fuels is the injection of steam into the combustion chamber. The influence of various mathematical submodels was studied on the accuracy of the numerical simulation of the process of n-heptane combustion in a laboratory burner with steam additive to the reaction zone as a promising chemical engineering method for the disposal of substandard liquid fuels and combustible waste with the production of thermal energy. The problem was solved in a three-dimensional stationary formulation. Systematic verification of these submodels, and a comparison of the results of the calculation with the experimental data obtained were carried out. The comparison with the experimental data was carried out for gas components and temperature distribution at the burner outlet; high agreement of the results was achieved. Optimal submodels of the methodology for calculating the process of fuel combustion in a jet of steam were determined. The best agreement with the experiment data was obtained using the EDC model in combination with a mechanism consisting of 60 components and 305 elementary reactions. More correct simulation results were obtained using the RSM turbulence model and the DO radiation model.
The paper is devoted to the numerical study of the effect of air injection into the hydrodynamic
Исследование направлено на разработку и апробацию методики численного моделирования аэродинамических и энергетических характеристик циклоидального ротора. За основу взята конфигурация ротора IAT21 L3. Для нее с использованием CFD-пакета ANSYS Fluent построена математическая модель и выполнен расчет. Проанализировано влияние скорости набегающего потока воздуха на движущийся ротор. Математическая модель и полученные результаты исследования могут быть использованы при создании летательных аппаратов с движителями роторного типа. This article addresses the study of the aerodynamic and energy characteristics of a cycloidal rotor subject to the influence of the incoming flow. Cycloidal rotor is one of the perspective devices that provide movement of aircrafts. Despite the fact that the concept of a cycloidal rotor arose in the early twentieth century, the model of a full-scale aircraft has not been yet realized. Foreign scientists have developed models of aircraft ranging in weight from 0.06 to 100 kg. The method of numerical calculation of the cycloidal rotor from the article [1] is considered and realized in this study. The purpose of study was the development and testing of a numerical simulation method for the cycloidal rotor and study aerodynamic and energy characteristics of the rotor in the hovering mode and under the influence of the oncoming flow. The aerodynamic and energy characteristics of the cycloidal rotor, rotating at a speed of 1000 rpm with incoming flow on it with velocities of 20-80 km/h, were calculated. The calculation results showed a directly proportional increase of thrust with an increase of the incoming on the rotor flow velocity, but the power consumed by the rotor was also increased. Increase of the incoming flow velocity leads to the proportional increasing of the lift coefficient and the coefficient of drag. Up to a speed of 80 km/h, an increase in thrust and power is observed; at higher speeds, there is a predominance of nonstationary effects and difficulties in estimating the aerodynamic characteristics of the rotor. In the future, it is planned to consider the 3D formulation of the problem combined with possibility of the flow coming from other sides.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.