This work presents a data-driven magnetostatic finite-element solver that is specifically well suited to cope with strongly nonlinear material responses. The data-driven computing framework is essentially a multiobjective optimization procedure matching the material operation points as closely as possible to given material data while obeying Maxwell's equations. Here, the framework is extended with heterogeneous (local) weighting factors-one per finite element-equilibrating the goal function locally according to the material behavior. This modification allows the data-driven solver to cope with unbalanced measurement data sets, that is, data sets suffering from unbalanced space filling. This occurs particularly in the case of strongly nonlinear materials, which constitute problematic cases that hinder the efficiency and accuracy of standard data-driven solvers with a homogeneous (global) weighting factor. The local weighting factors are embedded in the distance-minimizing data-driven algorithm used for noiseless data, likewise for the maximum entropy data-driven algorithm used for noisy data. Numerical experiments based on a quadrupole magnet model with a soft magnetic material show that the proposed modification results in major improvements in terms of solution accuracy and solver efficiency. For the case of noiseless data, local weighting factors improve the convergence of the data-driven solver by orders of magnitude. When noisy data are considered, the convergence rate of the data-driven solver is doubled.

This paper develops a data-driven magnetostatic finite-element (FE) solver which directly exploits measured material data instead of a material curve constructed from it. The distances between the field solution and the measurement points are minimized while enforcing Maxwell's equations. The minimization problem is solved by employing the Lagrange multiplier approach. The procedure wraps the FE method within an outer data-driven iteration. The method is capable of considering anisotropic materials and is adapted to deal with models featuring a combination of exact material knowledge and measured material data. Thereto, three approaches with an increasing level of intrusivity according to the FE formulation are proposed. The numerical results for a quadrupole-magnet model show that data-driven field simulation is feasible and affordable and overcomes the need of modeling the material law.

We present an algorithm for computing sparse, least squares-based polynomial chaos expansions, incorporating both adaptive polynomial bases and sequential experimental designs. The algorithm is employed to approximate stochastic high-frequency electromagnetic models in a black-box way, in particular, given only a dataset of random parameter realizations and the corresponding observations regarding a quantity of interest, typically a scattering parameter. The construction of the polynomial basis is based on a greedy, adaptive, sensitivity-related method. The sequential expansion of the experimental design employs different optimality criteria, with respect to the algebraic form of the least squares problem. We investigate how different conditions affect the robustness of the derived surrogate models, that is, how much the approximation accuracy varies given different experimental designs. It is found that relatively optimistic criteria perform on average better than stricter ones, yielding superior approximation accuracies for equal dataset sizes. However, the results of strict criteria are significantly more robust, as reduced variations regarding the approximation accuracy are obtained, over a range of experimental designs. Two criteria are proposed for a good accuracy-robustness trade-off.keywordspolynomial chaos, surrogate modeling, high-frequency electromagnetic devices, least squares regression, adaptive basis, sequential experimental design

Purpose The purpose of this paper is to present the applicability of data-driven solvers to computationally demanding three-dimensional problems and their practical usability when using real-world measurement data. Design/methodology/approach Instead of using a hard-coded phenomenological material model within the solver, the data-driven computing approach reformulates the boundary value problem such that the field solution is directly computed on raw measurement data. The data-driven formulation results in a double minimization problem based on Lagrange multipliers, where the sought solution must conform to Maxwell’s equations while at the same time being as close as possible to the available measurement data. The data-driven solver is applied to a three-dimensional model of a direct current electromagnet. Findings Numerical results for data sets of increasing cardinality verify that the data-driven solver recovers the conventional solution. Additionally, the practical usability of the solver is shown by using real-world measurement data. This work concludes that the data-driven magnetostatic finite element solver is applicable to computationally demanding three-dimensional problems, as well as in cases where a prescribed material model is not available. Originality/value Although the mathematical derivation of the data-driven problem is well presented in the referenced papers, the application to computationally demanding real-world problems, including real measurement data and its rigorous discussion, is missing. The presented work closes this gap and shows the applicability of data-driven solvers to challenging, real-world test cases.

The integration of machine learning (Keplerian paradigm) and more general artificial intelligence technologies with physical modeling based on first principles (Newtonian paradigm) will impact scientific computing in engineering in fundamental ways. Such hybrid models combine first principle-based models with data-based models into a joint architecture. This paper will give some background, explain trends and showcase recent achievements from an applied mathematics and industrial perspective. Examples include characterization of superconducting accelerator magnets by blending data with physics, data-driven magnetostatic field simulation without an explicit model of the constitutive law, and Bayesian free-shape optimization of a trace pair with bend on a printed circuit board.