PEMISAHAN CESIUM DALAM BAHAN BAKAR U3Si2/Al DENSITAS 4,8 gU/cm3 BURN UP 60% POTONGAN BOTTOM. Telah dilakukan pemisahan cesium dalam bahan bakar U3Si2/Al densitas 4,8 gU/cm3 burn up 60% menggunakan bahan zeolit Lampung pada metode penukar kation. Burn up bahan bakar pasca iradiasi dapat ditentukan dengan indikator burn up menggunakan isotop cesium. Pemisahan bertujuan untuk mendapatkan berat cesium yang akurat sehingga perhitungan nilai burn up secara merusak juga dapat dilakukan secara tepat. PEB U3Si2/Al dipotong pada bagian Bottom secara duplo lalu ditambahkan pelarut HCl 6 N dan HNO3 6N. Satu mL larutan bahan bakar U3Si2/Al dimasukkan ke dalam botol vial dan ditransfer dari hotcell 109 ke laboratorium radiasi aktivitas sedang (R.135). Larutan bahan bakar U3Si2/Al diencerkan menjadi 25 mL dan dipipet 50 µL ke dalam vial secara duplo dan ditambahkan 1000 mg zeolit Lampung, kemudian dilakukan pemisahan 134Cs dan137Cs dari 235U dengan metode penukar kation secara batch selama 60 menit. Hasil pemisahan diperoleh isotop 134Cs dan 137Cs dalam fasa padat, sedangkan uranium (238U, 235U, 234U) dan isotop lainnya dalam fasa cair. Besarnya berat isotop 134Cs dan137Cs selanjutnya diukur menggunakan spektrometer-γ. Hasil pemisahan diperoleh berat isotop 137Cs dan 134Cs dalam larutan PEB U3Si2/Al densitas 4,8 gU/cm3 burn up 60% potongan Bottom masing-masing B-1=0,00003283 g/0,036gPEB dan B-1= 0,000000147 g/0,036gPEB, sedangkan untuk potongan B-2=0,00003290 g/0,037gPEB untuk 137Cs dan B-2= 0,000000222 g/0,037gPEB untuk 134Cs. Pemisahan cesium dalam 50 µL larutan PEB U3Si2/Al burn up 60% potongan Bottom dengan metode penukar kation menggunakan zeolit Lampung seberat 1000 mg diperoleh hasil yang baik.Kata kunci: U3Si2/Al densitas 4,8 gU/cm3, burn up 60%, cesium, pemisahan.
OPTIMASI PARAMETER METODE PEMISAHAN RADIONUKLIDA 95Zr DALAM LARUTAN PELAT ELEMEN BAKAR U3Si2/Al TERIRADIASI. Radionuklida 95Zr adalah salah satu radionuklida hasil belah pemancar radiasi-γ dan berumur paruh pendek sehingga dapat digunakan sebagai indikator burn up. Dalam pelat elemen bakar U3Si2/Al teriradiasi terdapat beberapa radionuklida hasil belah yang memancarkan radiasi α, β dan γ sehingga pada saat pengukuran menggunakan spektrometri-γ, radionuklida ini saling mengganggu mengakibatkan hasil pengukuran tidak akurat. Oleh sebab itu, perlu dilakukan pemisahan 95Zr sehingga pada saat pengukuran dengan spektrometer-γ diperoleh hasil yang akurat. Tujuan penelitian ini untuk mendapatkan parameter yang optimum terhadap pemisahan 95Zr dalam larutan pelat elemen bakar U3Si2/Al densitas 4,8 gU/cm3 teriradiasi dengan metode kolom penukar ion menggunakan resin Dowex 1x-8Cl- diameter 100-200 mesh. Parameter optimum yang diperoleh selanjutnya digunakan untuk pemisahan 95Zr dalam larutan pelat elemen bakar U3Si2/Al densitas 4,8 gU/cm3 teriradiasi. Dari hasil penelitian diperoleh parameter optimum keasaman H2SO4 pada umpan dengan konsentrasi 0,5 M, keasaman H2SO4 untuk elusi konsentrasi 1,0 M dengan recovery 98,20%. Berat resin untuk mengikat radionuklida 95Zr sebanyak 2,0 g dengan recovery 78,76%; volum umpan yang dibutuhkan sebanyak 50 µL dengan recovery 96,90% dan kecepatan alir sebesar 0,1 mL/menit dengan recovery 96,72%. Parameter optimum tersebut digunakan untuk pemisahan larutan pelat elemen bakar U3Si2/Al densitas 4,8 gU/cm3 teriradiasi dengan kode Bottom (B), Middle (M) dan Top (T). Hasil pengukuran didapat rerata recovery pemisahan 95Zr masing-masing untuk kode B-1= 75,078%; B-2= 81,401%; M1=76,850%; M-2=83,806%; T-1=84,433%; dan T-2=81,728% dengan keberterimaan nilai CV repeatability lebih kecil dibandingkan dengan nilai CV Horwitz. Kata kunci: kolom penukar ion, U3Si2/Al teriradiasi, radionuklida 95Zr, spektrometer-γ, uji Horwitz.
KARAKTERISASI TERMAL PEB U-7Mo/Al SEBAGAI BAHAN BAKAR REAKTOR RISET. Bahan bakar berbasis UMo/Al merupakan kandidat bahan bakar reaktor riset dan sebagai alternatif pengganti bahan bakar U3Si2/Al. Hal ini disebabkan karena paduan UMo/Al memiliki densitas uranium yang lebih tinggi yaitu sekitar 16,4 g/cm3 dibandingkan dengan U3Si2/Al sebesar 12,2 g/cm3. Selain itu, paduan UMo mempunyai tampang lintang serapan neutron rendah dan proses olah ulang relatif mudah. Paduan U-7Mo/Al mampu mempertahankan fasa γ-U selama proses iradiasi, sehingga stabilitas bahan bakar di dalam reaktor tetap terjaga. Paduan U-7Mo telah difabrikasi menjadi mini pelat PEB U-7Mo/Al. Tujuan dari penelitian ini adalah mengetahui karakteristik termal dari PEB U-7Mo/Al sebagai masukan kepada fabrikator bahan bakar reaktor riset dalam pembuatan bahan bakar berbasis UMo/Al. Karakterisasi termal dilakukan terhadap logam uranium, molybdenum, paduan UMo dan PEB U-7Mo/Al mengguakan Differential Scanning Calorimetry (DSC) Setaram. Hasil karakterisasi termal menunjukan bahwa PEB U-7Mo/Al stabil terhadap termal hingga 600 °C, karena pada temperatur 632,962 °C PEB U-7Mo/Al telah mengalami reaksi termokimia endotermik dengan DH= 144,318 J/g. Pada 656,186 ºC terjadi peleburan matriks Al dan kelongsong AlMg2 dalam PEB U-7Mo/Al dengan DH = 144,318 J/g. Pada temperatur 952,810 ºC hingga 1106,050 ºC, lelehan matriks Al berdifusi dengan UMo membentuk senyawa U(Mo,Al)x metastabil dan pemanasan hingga temperatur hingga 1211,760 ºC terbentuk layer UAlx (UAl2, UAl3 dan UAl4) dengan DH= –22,721 J/g. Kata kunci: Sifat termal, DSC, PEB UMo/Al, reaktor riset.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.