This paper describes the synthesis and characterization of p-aminobenzoic modified cellulose (Cell-PAB), as well as the separation and preconcentration of Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) ions from an aqueous medium using a Cell-PAB bath and the column technique. The quantity of p-aminobenzoic groups attached to the cellulose surface, i.e., 1.81±0.04 mmol/g, was determined by elemental analysis. The FT-IR spectra of Cell-PAB revealed characteristic bands of paminobenzoic groups, indicating the desired functionalization of the cellulose surface. The adsorptive capacities for the metals (Ns) Cd, Cu, Ni, Pb and Zn (Ns) were, respectively, 1.72 ± 0.02, 1.96 ± 0.02, 1.88 ± 0.04, 2.01 ± 0.03 and 1.93 ± 0.03 mmol/g. Metal separations performed in flow experiments using a column packed with 1 g of Cell-PAB and 5 mL of 1.5 mol/L HCl solution as eluent achieved an almost 100% metal ions recovery rate.

Este trabalho descreve a síntese e caracterização da sílica gel modificada com grupos 2-aminotiazol (SiAT), e os resultados de um estudo de adsorção e pré-concentração (em batelada e em fluxo, utilizando-se um sistema por injeção em fluxo acoplado com um espectrômetro de absorção atômica) de Cu(II), Ni(II) e Pb(II) em meio aquoso. A capacidade máxima de adsorção da SiAT determinada para os íons metálicos estudados em mmol g -1 foram: Cu(II)= 1,18, Ni(II)= 1,15 and Pb(II)= 1,10. Os resultados obtidos nos experimentos em fluxo, mostraram uma recuperação de praticamente 100% dos íons metálicos adsorvidos em uma mini-coluna empacotada com 100 mg de SiAT, utilizando-se 100 µL de HCl 2 mol L -1 como eluente. A sorção-desorção quantitativa dos íons Cu(II), Ni(II) e Pb(II), permitiu a aplicação do sistema em fluxo na pré-concentração e posterior quantificação desses íons metálicos em amostras de águas naturais digeridas e não digeridas por oxidação com radiação UV.This work describes the synthesis and characterization of 2-aminothiazole modified silica gel (SiAT), and the results of a study of the adsorption and pre-concentration (in batch and using a flowinjection system coupled to an absorption atomic spectrometer) of Cu(II), Ni(II) and Pb(II) in aqueous medium. The adsorption capacities for each metal ions in mmol g -1 were: Cu(II)= 1.18, Ni(II)= 1.15 and Pb(II)= 1.10. The results obtained in the flow experiments showed a recovery of practically 100% of the metal ions adsorbed in a mini-column packed with 100 mg of SiAT, using 100 µL of 2.0 mol L -1 HCl solution as eluent. The sorption-desorption of the metal ions made possible the application of a flow-injection system for the pre-concentration and quantification by FAAS of metal ions at trace level in natural water samples digested and not digest by an oxidizing UV photolysis.

a b s t r a c tThis paper discusses the applicability of an electronic tongue (e-tongue) based on capacitance measurements to determine the water content in ethanol. The e-tongue consisted of an array of interdigitated electrodes coated with ultrathin films of gallium nitrate and titanium dioxide, which were robust against attack by ethanol. Principal Component Analysis (PCA) was used to treat the capacitance data for discriminating ethanol/water mixtures even in cases with very small water contents. Discrimination is easier if the water added to ethanol contains ions, as is the case of tap water or if NaCl is added to the mixtures. With this e-tongue we were able to quantify the water content through a linear relationship between the first principal component (PC1) and the added water to the biofuel. Therefore, we have proven to be possible to measure the water content precisely, which is one of the major problems in ethanol biofuel adulteration nowadays.

The lability of Cd(II), Cr(III), Cu(II), Mn(II) and Pb(II) complexed by humic substances (HSs) was investigated by means of ion exchange on cellulose modified with p-aminobenzoic groups (Cell-PAB), using a batch procedure. The HSs were extracted from water samples using adsorption in a column packed with XAD 8 resin. The metal-HS complexes were prepared by adding solutions containing all the aforementioned metal ions ( Cd(II), Cr(III), Cu(II), Mn(II) and Pb(II) ). The results indicated that the distribution coefficients (Kd) of Cell-PAB decreased with the presence of HSs, and that the lability of metal fractions complexed by HSs decreases in pH values > 4.0, complexation time > 10 h and HS concentration > 500 mg L-1. The metal exchange between HSs and Cell-PAB exhibited the following order of metal ion lability: Cd < Pb < Mn <FONT FACE=Symbol>@</FONT> Cr < Cu.

No abstract

No abstract

Este trabalho descreve um método de modificação do TiO2 obtido pelo processo sol-gel, através da adição de óxido de cério no momento da síntese. O material foi caracterizado por adsorção de N2 a 77K. A adição de CeO2 aumenta a área específica do catalisador em 135% e reduz o diâmetro de poros. A atividade catalítica desses materiais foi verificada frente à reação de foto-decomposição do hidrogenoftalato de potássio e comparada ao TiO2 comercial P25 da Degussa.

Este trabalho teve por objetivo utilizar o hidrogenoftalato de potássio como molécula modelo para estudos de adsorção em TiO2. Os resultados de adsorção do hidrogeneoftalato sobre TiO2 se ajustaram aos modelos de adsorção propostos por Langmuir e Freundlich, sendo que o modelo de Freundlich descreveu melhor o fenômeno. A adsorção foi função da temperatura e a capacidade de adsorção aumentou de 2,4 para 4,5 mg.g-1 quando se elevou a temperatura de 20 para 30ºC.