Penelitian ini bertujuan untuk mengetahui pengaruh holding time, Baja AISI 1050 merupakan salah satu baja sedang yang sering digunakan dalam industri untuk pembuatan komponen. Tujuan dari penelitian ini adalah menganalisa sifat mekanik baja sedang AISI 1050 .Penelitian baja sedang AISI 1050 ini dilakukan dengan perlakuan panas annneling pada temperatur 900ºC dengan tiga variasi waktu tahan 30 menit, 45 menit, 60 menit yang diikuti pendinginan udara dan tanpa perlakuan. Kemudian dilakukan pengujian impak untuk mengetahui ketangguhan. Hasil uji impak yang didapatkan nilai yang tertinggi adalah pada waktu tahan 45 menit, yaitu 2,28 Joule/mm². Kata kunci : Baja AISI 1050,holding time annealing, ketangguhan Impak.
In this study the tensile strength and hardness of ASTM A36 material that weld by SMAW process with variations in cooling media, namely seawater, air, and oil. The highest tensile strength value is 81.16 Kgf/mm2 with seawater cooling media. The highest hardness value in the base metal area is 93.5 HRC with oil cooling treatment. The highest hardness value in the weld metal on specimens using air cooling treatment is 93.33 HRC. The highest hardness value in the HAZ area is in the specimens using seawater cooling treatment with a value of 90.83 HRC. The Phase change during quenching proses with different media probably affects the mechanical properties of ASTM A36 material.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.